| 1 |
반응성 실리콘 고무로 개질된 에폭시 수지의 특성: 경화속도론 및 화학유변학
홍영기, 이상묵, 유영재, 이재욱
Polymer(Korea), 41(2), 260, 2017 |
| 2 |
Non-Newtonian behavior observed via dynamic rheology for various particle types in energetic materials and simulant composites
Choi JH, Lee S, Lee JW
Korea-Australia Rheology Journal, 29(1), 9, 2017 |
| 3 |
고분자 복합화약 및 그 모사체에서의 고분자 함량 결정
최종한, 홍영기, 이상묵, 이재욱
Polymer(Korea), 41(1), 53, 2017 |
| 4 |
평판-평판 레오미터에서 고농축 현탁계의 벽면 No-slip 층 효과
홍영기, 최종한, 이상묵, 이재욱
Polymer(Korea), 41(1), 47, 2017 |
| 5 |
Water-assisted extrusion of polypropylene/clay nanocomposites in high shear condition
Lee S, Yoo J, Lee JW
Journal of Industrial and Engineering Chemistry, 31, 317, 2015 |
| 6 |
Polyurethane curing kinetics for polymer bonded explosives: HTPB/IPDI binder
Lee S, Choi CH, Hong IK, Lee JW
Korean Journal of Chemical Engineering, 32(8), 1701, 2015 |
| 7 |
Curing behavior of polyurethane as a binder for polymer-bonded explosives
Lee S, Choi JH, Hong IK, Lee JW
Journal of Industrial and Engineering Chemistry, 21, 980, 2015 |
| 8 |
Effect of manufacturing condition in PC/PMMA/CNT nanocomposites extrusion on the electrical, morphological, and mechanical properties
Park J, Lee S, Lee JW
Korea-Australia Rheology Journal, 27(1), 55, 2015 |
| 9 |
고에너지 물질 시뮬란트의 분산도의 In-Line 모니터링
이상묵, 홍인권, 안영준, 이재욱
Polymer(Korea), 38(3), 272, 2014 |
| 10 |
Optimal two-stage single-screw design for polymethyl methacrylate extrusion by taguchi technique
Lee H, Lee JW, Hong IK, Lee S
Journal of Industrial and Engineering Chemistry, 20(3), 1119, 2014 |
| 11 |
고농축 복합화약 시뮬란트의 유변학적 특성: 벽면 미끄러짐, 틱소트로피, 유동불안정성
이상묵, 홍인권, 안영준, 이재욱
Polymer(Korea), 38(2), 213, 2014 |
| 12 |
미세구조 해석을 통한 고농축 복합화약 시뮬란트의 유변물성 예측
이상묵, 홍인권, 이재욱, 심정섭
Polymer(Korea), 38(2), 225, 2014 |
| 13 |
고농축 복합화약 시뮬란트: Exact/Dechlorane 현탁계의 유변물성
이상묵, 홍인권, 이재욱, 이근득
Polymer(Korea), 38(3), 286, 2014 |
| 14 |
Hydroxyl Terminated Polybutadiene/(설탕 또는 탄산칼슘) 현탁계의 유변물성 및 경화특성
이상묵, 홍인권, 이재욱, 정원복
Polymer(Korea), 38(4), 417, 2014 |
| 15 |
Electrical conductivity enhancement of polycarbonate/poly(styrene-co-acrylonitril)/carbon nanotube composites by high intensity ultrasound
Kim SK, Lee JW, Hong IK, Lee S
Macromolecular Research, 22(2), 154, 2014 |
| 16 |
Preparation of Nafion/Poly(ether(amino sulfone)) acid-base blend polymer electrolyte membranes and their application to DMFC
Nam SE, Park S, Choi WC, Lee JW, Kang Y
Macromolecular Research, 21(12), 1314, 2013 |
| 17 |
Effect of supercritical carbon dioxide as an exfoliation aid on bio-based polyethylene terephthalate glycol-modified/clay nanocomposites
Jang K, Lee JW, Hong IK, Lee S
Korea-Australia Rheology Journal, 25(3), 145, 2013 |
| 18 |
Reactive Extrusion of Polypropylene/Polystyrene Blends with Supercritical Carbon Dioxide
Hwang TY, Lee S, Yoo Y, Jang K, Lee JW
Macromolecular Research, 20(6), 559, 2012 |
| 19 |
The Effect of Electron Beam Irradiation on the Dispersion and Properties of Poly(ethylene-co-vinyl acetate)/Clay Nanocomposites
Hwang TY, Lee S, Kang PH, Park KH, Ahn Y, Lee JW
Macromolecular Research, 19(11), 1151, 2011 |
| 20 |
Influence of twin screw extrusion processing condition on the properties of polypropylene/multi-walled carbon nanotube nanocomposites
Hwang TY, Kim HJ, Ahn Y, Lee JW
Korea-Australia Rheology Journal, 22(2), 141, 2010 |
| 21 |
Ultrasound assisted batch-processing of EVA-organoclay nanocomposites
Ahn Y, Kim H, Lee JW
Korean Journal of Chemical Engineering, 27(2), 723, 2010 |
| 22 |
나노구조를 갖는 중공구형 및 중공반구형 다공성 탄소 담체가 페놀 수산화 반응에 미치는 영향 및 용매 의존도
권송이, 윤성훈, 김희영, 이재욱, 이철위
Korean Chemical Engineering Research, 48(4), 423, 2010 |
| 23 |
페놀의 수산화 반응에 사용한 TS-1 촉매의 효과적인 재생 방법(소성 온도 의존성)
권송이, 윤성훈, 엄경섭, 이재욱, 이철위
Korean Chemical Engineering Research, 48(6), 679, 2010 |
| 24 |
Effect of the rheological properties of aqueous xanthan gum solution on chemical absorption of carbon dioxide with diisopropanolamine
Son YS, Park SW, Park DW, Lee JW
Korea-Australia Rheology Journal, 21(2), 109, 2009 |
| 25 |
Color Stabilization of Low Toxic Antimicrobial Polypropylene/Poly(hexamethylene guanidine) Phosphate Blends by Taguchi Technique
Lee S, Lee JW
Macromolecular Research, 17(6), 411, 2009 |
| 26 |
Investigation of Cure Kinetics and Storage Stability of the o-Cresol Novolac Epoxy Nanocomposites with Pre-intercalated Phenolic Hardeners
Hwang TY, Lee JW, Lee SM, Nam GJ
Macromolecular Research, 17(2), 121, 2009 |
| 27 |
Effect of elasticity of aqueous xanthan gum solution with 2-amino-methyl-1-propanol on chemical absorption of carbon dioxide
Park SW, Choi BS, Song KW, Lee JW
Korea-Australia Rheology Journal, 20(1), 1, 2008 |
| 28 |
Numerical analysis of injection molding for filling efficiency on ultrasonic process
Lee J, Kim N, Lee J
Korea-Australia Rheology Journal, 20(2), 79, 2008 |
| 29 |
Absorption of carbon dioxide into aqueous colloidal silica solution with diisopropanolamine
Park SW, Choi BS, Kim SS, Lee BD, Lee JW
Journal of Industrial and Engineering Chemistry, 14(2), 166, 2008 |
| 30 |
Chemical absorption of carbon dioxide into aqueous elastic xanthan gum solution containing NaOH
Park SW, Choi BS, Lee JW
Journal of Industrial and Engineering Chemistry, 14(3), 303, 2008 |
| 31 |
Mass transfer of carbon dioxide in aqueous colloidal silica solution containing N-methyldiethanolamine
Park SW, Choi BS, Kim SS, Lee JW
Korean Journal of Chemical Engineering, 25(4), 819, 2008 |
| 32 |
Rheology of PP/Clay Hybrid Produced by Supercritical CO2 Assisted Extrusion
Lee SM, Shim DC, Lee JW
Macromolecular Research, 16(1), 6, 2008 |
| 33 |
Development of polypropylene-clay nanocomposite with supercritical CO2 assisted twin screw extrusion
Hwang TY, Lee SM, Ahn YJ, Lee JW
Korea-Australia Rheology Journal, 20(4), 235, 2008 |
| 34 |
Rheological properties of branched polycarbonate prepared by an ultrasound-assisted intensive mixer
Kim H, Lee H, Lee JW
Korea-Australia Rheology Journal, 19(1), 1, 2007 |
| 35 |
Influence of polyethylene oxide on absorption of carbon dioxide into aqueous N-methyldiethanolamine solution
Park SW, Choi BS, Lee JW
Korean Journal of Chemical Engineering, 24(3), 431, 2007 |
| 36 |
Effect of Ultrasound on the Properties of Biodegradable Polymer Blends of Poly(lactic acid) with Poly(butylene adipate-co-terephthalate)
Lee S, Lee Y, Lee JW
Macromolecular Research, 15(1), 44, 2007 |
| 37 |
Effect of Polyacrylamide on Absorption Rate of Carbon Dioxide in Aqueous Polyacrylamide Solution Containing Monoethanolamine
Park SW, Choi BS, Lee JW
Journal of Industrial and Engineering Chemistry, 13(1), 7, 2007 |
| 38 |
Chemical Absorption of Carbon Dioxide into Aqueous Colloidal Silica Solution Containing Monoethanolamine
Park SW, Choi BS, Kim SS, Lee JW
Journal of Industrial and Engineering Chemistry, 13(1), 133, 2007 |
| 39 |
Effect of Polyethylene Oxide on Absorption of Carbon Dioxide into Aqueous NaOH Solution
Park SW, Choi BS, Lee JW
Journal of Industrial and Engineering Chemistry, 13(2), 170, 2007 |
| 40 |
Kinetic parameters using an immobilized tetrahexylammonium chloride catalyst in glycidyl methacrylate reaction with carbon dioxide
Park SW, Choi BS, Park DW, Kim SS, Lee JW
Korean Journal of Chemical Engineering, 24(6), 953, 2007 |
| 41 |
Absorption of carbon dioxide into non-aqueous solutions of N-methyldiethanolamine
Park SW, Lee JW, Choi BS, Lee JW
Korean Journal of Chemical Engineering, 23(5), 806, 2006 |
| 42 |
PC/ASA blends having enhanced interfacial and mechanical properties
Kang MS, Kim CK, Lee JW
Korea-Australia Rheology Journal, 18(1), 1, 2006 |
| 43 |
High-pressure rheology of polymer melts containing supercritical carbon dioxide
Lee SM, Han JH, Kim KY, Ahn YJ, Lee JW
Korea-Australia Rheology Journal, 18(2), 83, 2006 |
| 44 |
Effect of elasticity of aqueous colloidal silica solution on chemical absorption of carbon dioxide with 2-amino-2-methyl-1-propanol
Park SW, Choi BS, Lee JW
Korea-Australia Rheology Journal, 18(3), 133, 2006 |
| 45 |
Numerical analysis of internal flow and mixing performance in polymer extruder I: single screw element
Kim N, Kim H, Lee J
Korea-Australia Rheology Journal, 18(3), 143, 2006 |
| 46 |
Numerical analysis of internal flow and mixing performance in polymer extruder II: twin screw element
Kim N, Kim H, Lee J
Korea-Australia Rheology Journal, 18(3), 153, 2006 |
| 47 |
Thermal Degradation Kinetics of Antimicrobial Agent, Poly(hexamethylene guanidine) Phosphate
Lee S, Jin BS, Lee JW
Macromolecular Research, 14(5), 491, 2006 |
| 48 |
Carbonation Kinetics of Potassium Carbonate by Carbon Dioxide
Park SW, Sung DH, Choi BS, Lee JW, Kumazawa H
Journal of Industrial and Engineering Chemistry, 12(4), 522, 2006 |
| 49 |
Chemical absorption of carbon dioxide with triethanolamine in non-aqueous solutions
Park SW, Choi BS, Lee JW
Korean Journal of Chemical Engineering, 23(1), 138, 2006 |
| 50 |
Reaction rate of carbon dioxide in glycidyl methacrylate solution using tricaprylylmethylammonium chloride as a catalyst
Park SW, Park DW, Lee JW
Korean Journal of Chemical Engineering, 23(4), 645, 2006 |
| 51 |
Characterization and processing of Biodegradable polymer blends of poly(lactic acid) with poly(butylene succinate adipate)
Lee S, Lee JW
Korea-Australia Rheology Journal, 17(2), 71, 2005 |
| 52 |
Kinetics of Absorption of Carbon Dioxide in Monoethanolamine Solutions of Polar Organic Solvents
Park SW, Lee JW, Choi BS, Lee JW
Journal of Industrial and Engineering Chemistry, 11(2), 202, 2005 |
| 53 |
In-line measurement of residence time distribution in twin-screw extruder using non-destructive ultrasound
Lee SM, Park JC, Lee SM, Ahn YJ, Lee JW
Korea-Australia Rheology Journal, 17(2), 87, 2005 |
| 54 |
Effect of viscosity ratio and AN content on the compatibilization of PC-SAN blends during ultrasound-assisted melt mixing
Kim H, Yang H, Lee JW
Korea-Australia Rheology Journal, 17(4), 165, 2005 |
| 55 |
Effect of PEO viscoelasticity on carbon dioxide absorption in aqueous PEO solution of AMP
Park SW, Choi BS, Lee JW
Korea-Australia Rheology Journal, 17(4), 199, 2005 |
| 56 |
Investigation of pressure-volume-temperature relationship by ultrasonic technique and its application for the quality prediction of injection molded parts
Kim JG, Kim H, Kim HS, Lee JW
Korea-Australia Rheology Journal, 16(4), 163, 2004 |
| 57 |
Morphology and mechanical properties of LDPE/PS blends prepared by ultrasound-assisted melt mixing
Ryu JG, Kim H, Kim MH, Lee JW
Korea-Australia Rheology Journal, 16(3), 147, 2004 |
| 58 |
Mass Transfer of Carbon Dioxide in Aqueous Polyacrylamide Solution with Methyldiethanolamine
Park SW, Choi BS, Kim SS, Lee JW
Korean Journal of Chemical Engineering, 21(6), 1205, 2004 |
| 59 |
Effect of rheological properties on chemical absorption of carbon dioxide with MEA
Park SW, Kim TY, Choi BS, Lee JW
Korea-Australia Rheology Journal, 16(1), 35, 2004 |
| 60 |
Phase Behavior of Binary and Ternary Blends Having the Same Chemical Components and Compositions
Yoo JE, Kim Y, Kim CK, Lee JW
Macromolecular Research, 11(5), 303, 2003 |
| 61 |
Development of Poly(methyl methacrylate)-Clay Nanocomposites by Using Power Ultrasonic Wave
Ryu JG, Lee JW, Kim H
Macromolecular Research, 10(4), 187, 2002 |
| 62 |
Evolution of phase morphology and in-situ compatibilization of polymer blends during ultrasound-assisted melt mixing
Kim H, Ryu JG, Lee JW
Korea-Australia Rheology Journal, 14(3), 121, 2002 |
| 63 |
Synthesis of Polypropylene-Polystyrene Copolymer via Ultrasonic Irradiation-Initiated Polymerization of Styrene in Polypropylene Solution
Kim H, Kim J, Kim M, Oh S, Lee J
Korea Polymer Journal, 9(3), 150, 2001 |
| 64 |
Control of morphology and interfacial tension of PC/SAN blends with compatibilizer
Kim JH, Kim MJ, Kim CK, Lee JW
Korea-Australia Rheology Journal, 13(3), 125, 2001 |
| 65 |
A study of size and frictional effects on the evolution of melting; Part II: Twin screw extruder
Kim DS, Lee BK, Kim HS, Lee JW, Gogos CG
Korea-Australia Rheology Journal, 13(2), 89, 2001 |
| 66 |
Ultrasonic degradation of polypropylene and its application for the development of PP based copolymer and nanocomposite
Ryu JG, Lee PS, Kim H, Lee JW
Korea-Australia Rheology Journal, 13(2), 61, 2001 |
| 67 |
Optimization of filling process in RTM using genetic algorithm
Kim BY, Nam GJ, Ryu HS, Lee JW
Korea-Australia Rheology Journal, 12(1), 83, 2000 |
