1 |
Impact of different LEED versions for green building certification and energy efficiency rating system: A Multifamily Midrise case study Rastogi A, Choi JK, Hong T, Lee M Applied Energy, 205, 732, 2017 |
2 |
Development of a new multi-stage building energy model calibration methodology and validation in a public library Cacabelos A, Eguia P, Febrero L, Granada E Energy and Buildings, 146, 182, 2017 |
3 |
Performance evaluation of a flat-plate solar collector filled with porous metal foam: Experimental and numerical analysis Saedodin S, Zamzamian SAH, Nimvari ME, Wongwises S, Jouybari HJ Energy Conversion and Management, 153, 278, 2017 |
4 |
Experimental investigation on a solar parabolic trough collector for absorber tube filled with porous media Jamal-Abad MT, Saedodin S, Aminy M Renewable Energy, 107, 156, 2017 |
5 |
Effects of porous material and nanoparticles on the thermal performance of a flat plate solar collector: An experimental study Jouybari HJ, Saedodin S, Zamzamian A, Nimvari ME, Wongwises S Renewable Energy, 114, 1407, 2017 |
6 |
Impact of ASHRAE's museum climate classes on energy consumption and indoor climate fluctuations: Full-scale measurements in museum Hermitage Amsterdam Kramer RP, Schellen HL, van Schijndel AWM Energy and Buildings, 130, 286, 2016 |
7 |
Climatic parameters for building energy applications: A temporal-geospatial assessment of temperature indicators Mourshed M Renewable Energy, 94, 55, 2016 |
8 |
Lessons learned: ASHRAE's approach in the refurbishment of historic and existing buildings Phoenix T Energy and Buildings, 95, 13, 2015 |
9 |
Development of methodology for calibrated simulation in single-family residential buildings using three-parameter change-point regression model Kim KH, Haberl JS Energy and Buildings, 99, 140, 2015 |
10 |
Calibrated simulation of a public library HVAC system with a ground-source heat pump and a radiant floor using TRNSYS and GenOpt Cacabelos A, Eguia P, Miguez JL, Granada E, Arce ME Energy and Buildings, 108, 114, 2015 |