| 1 |
Evaluating the influence of milling time,and sintering temperature and time on the microstructural changes and mechanical properties of Al-Y2W3O12-AlN hybrid composites
Sethi J, Das S, Das K
Powder Technology, 377, 244, 2021 |
| 2 |
Fe-based metallic glass particles reinforced Al-7075 matrix composites prepared by spark plasma sintering
Guan HD, Li CJ, Gao P, Yi JH, Bao R, Tao JM, Fang D, Feng ZX
Advanced Powder Technology, 31(8), 3500, 2020 |
| 3 |
Microstructure and wear resistance properties of Al/Al-Cu-Cr-Fe composites consolidated using spark plasma sintering
Li FZ, Tian LH, Li RT, Wang Y, Liu ZQ
Composite Interfaces, 27(5), 515, 2020 |
| 4 |
Mechanical properties and tribological behavior of aluminum matrix composites reinforced with Fe-based metallic glass particles: Influence of particle size
He TB, Lu TW, Ciftci N, Tan H, Uhlenwinkel V, Nielsch K, Scudino S
Powder Technology, 361, 512, 2020 |
| 5 |
Thermal stability and strain sensitivity of nanostructured aluminum titanate (Al2TiO5)
Keyvani N, Azarniya A, Hosseini HRM, Abedi M, Moskovskikh D
Materials Chemistry and Physics, 223, 202, 2019 |
| 6 |
Study on the incorporation of ceramic nanoparticles into the semi-solid A356 melt
Behnamfard S, Khosroshahi RA, Brabazon D, Mousavian RT
Materials Chemistry and Physics, 230, 25, 2019 |
| 7 |
Effect of ZrO2 contents and ageing times on mechanical and electrical properties of Al-4.5 wt.% Cu nanocomposites prepared by mechanical alloying
Taha MA, Elkomy GM, Mostafa HA, Gouda E
Materials Chemistry and Physics, 206, 116, 2018 |
| 8 |
Reaction mechanisms, resultant microstructures and tensile properties of Al-based composites fabricated in situ from Al-SiO2-Mg system
Zhu HG, Sun XD, Yu ZL, Huang JW, Li JL, Xie ZH
Advanced Powder Technology, 28(10), 2572, 2017 |
| 9 |
Preparation of super-high strength nanostructured B4C reinforced Al-2Cu aluminum alloy matrix composites by mechanical milling and hot press method: Microstructural, mechanical and tribological characterization
Alizadeh A, Maleki M, Abdollahi A
Advanced Powder Technology, 28(12), 3274, 2017 |
| 10 |
OPTIMIZATION OF MIXING PARAMETERS FOR A COLD MODEL SYSTEM BY CFD FOR ALUMINUM MATRIX COMPOSITES SYNTHESIS PROCESS
Sun Z, Hu CJ, Liu CL, Lu GM, Yu JG
Canadian Journal of Chemical Engineering, 95(3), 467, 2017 |
