| 1 |
Low velocity oblique impact behavior of adhesively bonded single lap joints
Atahan MG, Apalak MK
Journal of Adhesion Science and Technology, 34(3), 263, 2020 |
| 2 |
Numerical simulation of cement-to-formation interface debonding during hydraulic fracturing of shale gas wells
Lian W, Li J, Liu GH, Tao Q
Journal of Adhesion Science and Technology, 34(9), 917, 2020 |
| 3 |
Strength prediction of adhesively bonded ferrite pillar-tin bronze plate under axial shear loading
Han X, Chao YX, Yang P, Li XY, Zhang W, Jin Y, Wu CW
Journal of Adhesion Science and Technology, 34(6), 616, 2020 |
| 4 |
Failure behaviour of the single lap joints of angle-plied composites under three point bending tests
Kadioglu F, Demiral M
Journal of Adhesion Science and Technology, 34(5), 531, 2020 |
| 5 |
Interfacial fatigue damage behavior of fiber reinforced rubber-A combined experimental and cohesive zone model approach
Yu XM, Zhang B, Gu BQ
Polymer Engineering and Science, 60(6), 1316, 2020 |
| 6 |
Direct determination of a new mode-dependent cohesive zone model to simulate metal-to-metal adhesive joints
Gheibi MR, Shojaeefard MH, Googarchin HS
Journal of Adhesion, 95(10), 943, 2019 |
| 7 |
Failure prediction of adhesively bonded CFRP-Aluminum alloy joints using cohesive zone model with consideration of temperature effect
Qin GF, Na J, Tan W, Mu WL, Ji JD
Journal of Adhesion, 95(8), 723, 2019 |
| 8 |
Determination of traction-separation laws on an acrylic adhesive under shear and tensile loading
Imanaka M, Omiya M, Taguchi N
Journal of Adhesion Science and Technology, 33(6), 646, 2019 |
| 9 |
Estimation of static strength of adhesively bonded single lap joints with an acrylic adhesive under tensile shear condition based on cohesive zone model
Imanaka M, Omiya M, Taguchi N
Journal of Adhesion Science and Technology, 33(6), 660, 2019 |
| 10 |
Experimental and numerical investigations of adhesively bonded carbon/carbon composites subjected to interlaminar shear loads
Li X, Luo HB, Zhang HY, Wang SY, Han X, Wu HW
Journal of Adhesion Science and Technology, 33(20), 2207, 2019 |
