| 1 |
CFD-DEM modelling of biofilm streamer oscillations and their cohesive failure in fluid flow
Xia YQ, Jayathilake PG, Li BW, Zuliani P, Chen JJ
Biotechnology and Bioengineering, 118(2), 918, 2021 |
| 2 |
Investigating particle-level dynamics to understand bulk behavior in a lab-scale Agitated Filter Dryer (AFD) using Discrete Element Method (DEM)
Tamrakar A, Zheng A, Piccione PM, Ramachandran R
Advanced Powder Technology, 31(1), 477, 2020 |
| 3 |
Effects of liquid property on onset velocity of circulating fluidization in liquid-solid systems: A CFD-DEM simulation
Hua LN, Lu LQ, Yang N
Powder Technology, 364, 622, 2020 |
| 4 |
Heat transfer in a pulsed fluidized bed by using coupled CFD-DEM method
Zhang K, Wang S, Li BW, He YR, Zhao YH
Powder Technology, 367, 497, 2020 |
| 5 |
A DEM model-based study to quantitatively compare the effect of wet and dry binder addition in high-shear wet granulation processes
Tamrakar A, Chen SW, Ramachandran R
Chemical Engineering Research & Design, 142, 307, 2019 |
| 6 |
CFD-DEM-PBM coupled model development and validation of a 3D top-spray fluidized bed wet granulation process
Tamrakar A, Ramachandran R
Computers & Chemical Engineering, 125, 249, 2019 |
| 7 |
Effect of operating pressure on particle temperature distribution in a fluidized bed with heat production
Li Z, Annaland MV, Kuipers JAM, Deen NG
Chemical Engineering Science, 169, 299, 2017 |
| 8 |
Effect of operating pressure on particle temperature distribution in a fluidized bed with heat production
Li Z, Annaland MV, Kuipers JAM, Deen NG
Chemical Engineering Science, 169, 299, 2017 |
| 9 |
The influence of surface roughness and adhesion on particle rolling
Wilson R, Dini D, Van Wachem B
Powder Technology, 312, 321, 2017 |
| 10 |
Discrete element modeling of powder flow and laser heating in direct metal laser sintering process
Lee WH, Zhang Y, Zhang J
Powder Technology, 315, 300, 2017 |
