| 1 |
Low-stress over-molding of media-tight electronics using thermoplastic foam injection molding
Ott C, Drummer D
Polymer Engineering and Science, 61(5), 1518, 2021 |
| 2 |
Joining laser-sintered with injection-molded parts made of PA12 using infrared welding
Wolf M, Drummer D
Polymer Engineering and Science, 61(2), 514, 2021 |
| 3 |
Interfacial interaction and joining property of direct injection-molded polymer-metal hybrid structures: A molecular dynamics simulation study
Zhou MY, Xiong X, Drummer D, Jiang BY
Applied Surface Science, 478, 680, 2019 |
| 4 |
Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
Dechet MA, Goblirsch A, Romeis S, Zhao M, Lanyi FJ, Kaschta J, Schubert DW, Drummer D, Peukert W, Schmidt J
Chemical Engineering Science, 197, 11, 2019 |
| 5 |
Processing LDS-Circuit Boards by Selective Laser Sintering
Worz A, Wudy K, Drummer D, Heidebrecht M, Klein S
International Polymer Processing, 34(2), 248, 2019 |
| 6 |
Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene
Roth B, Zhou MY, Drummer D
International Polymer Processing, 34(4), 425, 2019 |
| 7 |
Influence of vacuum on the porosity and mechanical properties in rotational molding
Vetter L, Werner J, Wolf M, Hertle S, Drummer D
Polymer Engineering and Science, 59(8), 1544, 2019 |
| 8 |
Influence of Stitching Parameters on the Joint Strength of Welded-Stitched Composites
Wittman LM, Kleffel T, Mattner T, Drummer D
International Polymer Processing, 33(5), 706, 2018 |
| 9 |
Influence of the mold temperature on the material properties and the vibration welding process of crosslinked polyamide 66
Leisen C, Wolf M, Drummer D
Polymer Engineering and Science, 58, E207, 2018 |
| 10 |
Forming of Thermoplastic Matrix Composites with Gas Pressure - the Influence of Blank Holder and Sheet Temperature on the Forming Pressure and Drawing Ratio
Groschel C, Drummer D
International Polymer Processing, 32(2), 194, 2017 |
