| 1 |
Bonding temperature effects on the wide gap transient liquid phase bonding of Inconel 718 using BNi-2 paste filler metal
Yan GX, Bhowmik A, Nagarajan B, Song X, Tan SC, Tan MJ
Applied Surface Science, 484, 1223, 2019 |
| 2 |
Influence of interfacial reaction on reactive wettability of molten Ag-Cu-X wt.%Ti filler metal on SiC ceramic substrate and mechanism analysis
Yang J, Huang JH, Ye Z, Chen SH, Ji R, Zhao Y
Applied Surface Science, 436, 768, 2018 |
| 3 |
First-principles calculations on wetting interface between Ag-Cu-Ti filler metal and SiC ceramic: Ag (111)/SiC (111) interface and Ag (111)/TiC (111) interface
Yang J, Ye Z, Huang JH, Chen SH, Zhao Y
Applied Surface Science, 462, 55, 2018 |
| 4 |
A density-dependent modified Drucker-Prager Cap model for die compaction of Ag57.6-Cu22.4-Sn10-In10 mixed metal powders
Zhou MC, Huang SY, Hu JH, Lei Y, Xiao Y, Li B, Yan SW, Zou FL
Powder Technology, 305, 183, 2017 |
| 5 |
Development of optimum process parameters and a study of the effects of surface roughness on brazing of copper
Zaharinie T, Huda Z, Izuana MF, Hamdi M
Applied Surface Science, 331, 127, 2015 |
| 6 |
Induction brazing for gas sealing of anode-supported tubular solid oxide fuel cells using the nickel based brazing alloy modified by TiH2
Chung DY, Heo YH, Lee SB, Lim TH, Song RH, Shin DR
International Journal of Hydrogen Energy, 36(2), 1890, 2011 |
| 7 |
Ni기 삽입금속에 의해 진공 브레이징된 STS303-Cu의 특성평가
장세훈, 홍지민, 최세원, 강창석, 김호성, 오익현
Korean Journal of Materials Research, 17(6), 293, 2007 |
| 8 |
Ni기 삽입금속에 의해 진공 브레이징된 stainless steel의 특성평가
장세훈, 홍지민, 정창열, 최세원, 오익현
Korean Journal of Materials Research, 17(6), 342, 2007 |
| 9 |
진공브레이징에 의한 SUS304 스테인리스강과 BNi-2계 삽입금속의 접합특성 : Ni기 삽입금속에 의한 브레이징 접합성의 기초적 검토(I)
이용원, 김종훈
Korean Journal of Materials Research, 17(3), 142, 2007 |
| 10 |
BNi-2계 삽입금속에 의한 SUS304 스테인리스강 접합체의 강도와 조직에 미치는 브레이징 온도의 영향 : Ni기 삽입금속에 의한 브레이징 접합성의 기초적 검토(II)
이용원, 김종훈
Korean Journal of Materials Research, 17(3), 179, 2007 |
