| 1 |
The Effect of Fuel Electrode Roughness on the Properties of Plasma Sprayed Solid Oxide Cells
Kuhn J, Gupta M, Kesler O, Bjorklund S
Journal of the Electrochemical Society, 165(9), F693, 2018 |
| 2 |
Atmospheric Plasma-Sprayed Metal-Supported Solid Oxide Fuel Cells with Varying Cathode Microstructures
Harris J, Kuhn J, Kesler O
Journal of the Electrochemical Society, 164(4), F441, 2017 |
| 3 |
Suspension plasma spraying of La0.6Sr0.4Co0.2Fe0.8O3-delta cathodes: Influence of carbon black pore former on performance and degradation
Fan ESC, Kuhn J, Kesler O
Journal of Power Sources, 316, 72, 2016 |
| 4 |
High temperature oxidation tests for the high velocity solution precursor flame sprayed manganese-cobalt oxide spinel protective coatings on SOFC interconnector steel
Puranen J, Laakso J, Honkanen M, Heinonen S, Kylmalahti M, Lugowski S, Coyle TW, Kesler O, Vuoristo P
International Journal of Hydrogen Energy, 40(18), 6216, 2015 |
| 5 |
Carbon deposition thresholds on nickel-based solid oxide fuel cell anodes I. Fuel utilization
Kuhn J, Kesler O
Journal of Power Sources, 277, 443, 2015 |
| 6 |
Carbon deposition thresholds on nickel-based solid oxide fuel cell anodes II. Steam:carbon ratio and current density
Kuhn J, Kesler O
Journal of Power Sources, 277, 455, 2015 |
| 7 |
Electrochemical performance of solid oxide fuel cells having electrolytes made by suspension and solution precursor plasma spraying
Marr M, Kuhn J, Metcalfe C, Harris J, Kesler O
Journal of Power Sources, 245, 398, 2014 |
| 8 |
Method for in situ carbon deposition measurement for solid oxide fuel cells
Kuhn J, Kesler O
Journal of Power Sources, 246, 430, 2014 |
| 9 |
Characterization of Ni-YSZ anodes for solid oxide fuel cells fabricated by solution precursor plasma spraying with axial feedstock injection
Metcalfe C, Lay-Grindler E, Kesler O
Journal of Power Sources, 247, 831, 2014 |
| 10 |
Residual stresses in suspension plasma sprayed electrolytes in metal-supported solid oxide fuel cell half cells
Macwan A, Chen DL, Marr M, Kesler O
Journal of Power Sources, 221, 397, 2013 |
