| 1 |
Modeling fixed-bed reactors from metal-foam pellets with detailed CFD
Wehinger GD, Kolaczkowski ST, Schmalhorst L, Beton D, Torkuhl L
Chemical Engineering Journal, 373, 709, 2019 |
| 2 |
Application of the chromatographic method to determine the effective diffusivity in spherical gamma-alumina pellets using convolution theorem and a fictitious column
Zhang R, Kolaczkowski ST
Chemical Engineering Research & Design, 123, 248, 2017 |
| 3 |
Potential for metal foams to act as structured catalyst supports in fixed-bed reactors
Kolaczkowski ST, Awdry S, Smith T, Thomas D, Torkuhl L, Kolvenbach R
Catalysis Today, 273, 221, 2016 |
| 4 |
Y Removal of CO2 from a submersible atmosphere by scrubbing with water-Experiments in a single column
Kolaczkowski ST, Awdry S, Le CD, Nuckols ML, Smith T, Thomas D
Chemical Engineering Research & Design, 100, 157, 2015 |
| 5 |
Steam gasification of a refuse derived char: Reactivity and kinetics
Le CD, Kolaczkowski ST
Chemical Engineering Research & Design, 102, 389, 2015 |
| 6 |
Using quadrupole mass spectrometry for on-line gas analysis -Gasification of biomass and refuse derived fuel
Le CD, Kolaczkowski ST, McClymont DWJ
Fuel, 139, 337, 2015 |
| 7 |
Development of a continuous flow reactor for pharmaceuticals using catalytic monoliths: Pt/C selective oxidation of benzyl alcohol
Al Badran F, Awdry S, Kolaczkowski ST
Catalysis Today, 216, 229, 2013 |
| 8 |
Application of a methodology to assess the performance of a full-scale diesel oxidation catalyst during cold and hot start NEDC drive cycles
Robinson K, Ye SF, Yap Y, Kolaczkowski ST
Chemical Engineering Research & Design, 91(7), 1292, 2013 |
| 9 |
Copper exchanged ultrastable zeolite Y - A catalyst for NH3-SCR of NOx from stationary biogas engines
Ochonska J, McClymont D, Jodlowski PJ, Knapik A, Gil B, Makowski W, Lasocha W, Kolodziej A, Kolaczkowski ST, Lojewska J
Catalysis Today, 191(1), 6, 2012 |
| 10 |
Catalyst'light-off' experiments on a diesel oxidation catalyst connected to a diesel engine-Methodology and techniques
Ye SF, Yap YH, Kolaczkowski ST, Robinson K, Lukyanov D
Chemical Engineering Research & Design, 90(6), 834, 2012 |
