검색결과 : 49건
No. | Article |
---|---|
1 |
Photocatalytic Reactor Design: Guidelines for Kinetic Investigation Visan A, van Ommen JR, Kreutzer MT, Lammertink RGH Industrial & Engineering Chemistry Research, 58(14), 5349, 2019 |
2 |
Nanoparticle sintering in atomic layer deposition of supported catalysts: Kinetic modeling of the size distribution Grillo F, Moulijn JA, Kreutzer MT, van Ommen JR Catalysis Today, 316, 51, 2018 |
3 |
Modeling the size distribution in a fluidized bed of nanopowder Fabre A, Salameh S, Kreutzer MT, van Ommen JR Powder Technology, 312, 347, 2017 |
4 |
Tuning roughness and gloss of powder coating paint by encapsulating the coating particles with thin Al2O3 films Valdesueiro D, Hettinga H, Drijfhout JP, Lips P, Meesters GMH, Kreutzer MT, van Ommen JR Powder Technology, 318, 401, 2017 |
5 |
Modeling the precursor utilization in atomic layer deposition on nanostructured materials in fluidized bed reactors Grillo F, Kreutzer MT, van Ommen JR Chemical Engineering Journal, 268, 384, 2015 |
6 |
Design and characterization of bubble-splitting distributor for scaled-out multiphase microreactors Hoang DA, Haringa C, Portela LM, Kreutzer MT, Kleijn CR, van Steijn V Chemical Engineering Journal, 236, 545, 2014 |
7 |
Diffusion limitations in stagnant photocatalytic reactors Motegh M, Cen JJ, Appel PW, van Ommen JR, Kreutzer MT Chemical Engineering Journal, 247, 314, 2014 |
8 |
A capillary bioreactor to increase methane transfer and oxidation through Taylor flow formation and transfer vector addition Rocha-Rios J, Kraakman NJR, Kleerebezem R, Revah S, Kreutzer MT, van Loosdrecht MCM Chemical Engineering Journal, 217, 91, 2013 |
9 |
Bubbles scatter light, yet that does not hurt the performance of bubbly slurry photocatalytic reactors Motegh M, van Ommen JR, Appel PW, Mudde RF, Kreutzer MT Chemical Engineering Science, 100, 506, 2013 |
10 |
Increasing the stability of high contraction ratio flow of Boger fluids by pre-deformation Sankaran AK, Dros DA, Meerman HJ, Picken SJ, Kreutzer MT Journal of Non-Newtonian Fluid Mechanics, 196, 27, 2013 |