| 1 |
Analysis of high melt-strength poly(ethylene terephthalate) produced by reactive processing by shear and elongational rheology
Kruse M, Wang P, Shah RS, Wagner MH
Polymer Engineering and Science, 59(2), 396, 2019 |
| 2 |
Rheological and molecular characterization of long-chain branched poly(ethylene terephthalate)
Kruse M, Wagner MH
Rheologica Acta, 56(11), 887, 2017 |
| 3 |
Time-resolved rheometry of poly(ethylene terephthalate) during thermal and thermo-oxidative degradation
Kruse M, Wagner MH
Rheologica Acta, 55(10), 789, 2016 |
| 4 |
Kinetic modeling of urea decomposition based on systematic thermogravimetric analyses of urea and its most important by-products
Brack W, Heine B, Birkhold F, Kruse M, Schoch G, Tischer S, Deutschmann O
Chemical Engineering Science, 106, 1, 2014 |
| 5 |
A 2-Dimensional Reactor Model for Circulating Fluidized-Beds for Prediction of Spatial Concentration Distributions of Reactants
Schonfelder H, Kruse M, Werther J
Chemie Ingenieur Technik, 69(5), 658, 1997 |
| 6 |
2-Dimensional Model for Circulating Fluidized-Bed Reactors
Schoenfelder H, Kruse M, Werther J
AIChE Journal, 42(7), 1875, 1996 |
| 7 |
Measurement of Particle Flow Behavior in a Pilot-Plant Multi-Solid Fluidized-Bed Combustor by Using Suction Probe Technique
Win KK, Matsuda H, Hasatani M, Nowak W, Kruse M, Werther J
Journal of Chemical Engineering of Japan, 29(2), 205, 1996 |
| 8 |
A 2-Dimensional Model for Gas Mixing in the Upper Dilute Zone of a Circulating Fluidized-Bed
Kruse M, Schoenfelder H, Werther J
Canadian Journal of Chemical Engineering, 73(5), 620, 1995 |
| 9 |
2D Gas and Solids Flow Prediction in Circulating Fluidized-Beds Based on Suction Probe and Pressure Profile Measurements
Kruse M, Werther J
Chemical Engineering and Processing, 34(3), 185, 1995 |
| 10 |
Radial Gas Mixing in the Bottom Part of a Multi-Solid Fluidized-Bed
Win KK, Nowak W, Matsuda H, Hasatani M, Kruse M, Werther J
Journal of Chemical Engineering of Japan, 27(5), 696, 1994 |
