| 1 |
Processing Fiber-Reinforced Polymers: Specific Wear Phenomena Caused by Filler Materials
Blutmager A, Spahn T, Varga M, Friesenbichler W, Riedl H, Mayrhofer PH
Polymer Engineering and Science, 60(1), 78, 2020 |
| 2 |
Dislocation densities and alternating strain fields in CrN/AlN nanolayers
Gu XL, Zhang ZL, Bartosik M, Mayrhofer PH, Duan HP
Thin Solid Films, 638, 189, 2017 |
| 3 |
On the phase evolution of arc evaporated Al-Cr-based intermetallics and oxides
Dalbauer V, Ramm J, Kolozsvari S, Koller CM, Mayrhofer PH
Thin Solid Films, 644, 120, 2017 |
| 4 |
Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti-Al-N thin films
Riedl H, Koller CM, Munnik F, Hutter H, Martin FM, Rachbauer R, Kolozsvari S, Bartosik M, Mayrhofer PH
Thin Solid Films, 603, 39, 2016 |
| 5 |
Impact of bias potential and layer arrangement on thermal stability of arc evaporated Al-Cr-N coatings
Sabitzer C, Paulitsch J, Kolozsvari S, Rachbauer R, Mayrhofer PH
Thin Solid Films, 610, 26, 2016 |
| 6 |
High-rate deposition of AlTiN and related coatings with dense morphology by central cylindrical direct current magnetron sputtering
Jilek M, Jilek M, Martin FM, Mayrhofer PH, Veprek S
Thin Solid Films, 556, 361, 2014 |
| 7 |
The effect of interlayer composition and thickness on the stabilization of cubic AlN in AlN/Ti-Al-N superlattices
Chawla V, Holec D, Mayrhofer PH
Thin Solid Films, 565, 94, 2014 |
| 8 |
Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings
Schlogl M, Paulitsch J, Keckes J, Mayrhofer PH
Thin Solid Films, 531, 113, 2013 |
| 9 |
Cross-sectional X-ray nanobeam diffraction analysis of a compositionally graded CrNx thin film
Bartosik M, Daniel R, Mitterer C, Matko I, Burghammer M, Mayrhofer PH, Keckes J
Thin Solid Films, 542, 1, 2013 |
| 10 |
Influence of CrN and AlN layer thicknesses on structure and mechanical properties of CrN/AlN superlattices
Schlogl M, Mayer B, Paulitsch J, Mayrhofer PH
Thin Solid Films, 545, 375, 2013 |
