| 1 |
A model for stresses in a circular silo with an off-centre circular core, using the concept of a principal stress cap: Solution for a completely filled silo and comparison with Janssen and DEM data (vol 93, pg 330, 2015)
Matchett AJ, Langston PA, McGlinchey D
Chemical Engineering Research & Design, 129, 412, 2018 |
| 2 |
A "principal stress cap" model for stresses in a circular silo with an off-centre circular core: Finite core models, including filled silos, incipient flow and switch stresses (vol 106, pg 263, 2016)
Matchett AJ, Langston PA, McGlinchey D
Chemical Engineering Research & Design, 129, 415, 2018 |
| 3 |
A continuum model of stresses in a vertical silo with a flow channel in the vicinity of the wall, using the principal stress cap surface approach for the bulk solids (vol 122, pg 211, 2017)
Matchett AJ, Langston PA, McGlinchey D
Chemical Engineering Research & Design, 129, 417, 2018 |
| 4 |
A continuum model of stresses in a vertical silo with a flow channel in the vicinity of the wall, using the principal stress cap surface approach for the bulk solids
Matchett AJ, Langston PA, McGlinchey D
Chemical Engineering Research & Design, 122, 211, 2017 |
| 5 |
A "principal stress cap" model for stresses in a circular silo with an off-centre circular core: Finite core models, including filled silos, incipient flow and switch stresses
Matchett AJ, Langston PA, McGlinchey D
Chemical Engineering Research & Design, 106, 263, 2016 |
| 6 |
International Conference for Conveying and Handling of Particulate Solids (CHoPS2015) PREFACE
McGlinchey D, Ramirez-Gomez A
Particulate Science and Technology, 34(4), 423, 2016 |
| 7 |
Breakage functions of particles of four different materials subjected to uniaxial compression
Singh D, McGlinchey D, Crapper M
Particulate Science and Technology, 34(4), 494, 2016 |
| 8 |
A model for stresses in a circular silo with an off-centre circular core, using the concept of a principal stress cap: Solution for a completely filled silo and comparison with Janssen and DEM data
Matchett AJ, Langston PA, McGlinchey D
Chemical Engineering Research & Design, 93, 330, 2015 |
| 9 |
Investigation of the parameters important in the measurement of small particle impact forces
Cowell A, McGlinchey D, Pugh JR, Ibrahim M
Powder Technology, 269, 267, 2015 |
| 10 |
Analysis and Measurements from a Prototype In-Line Thermal Solids Mass Flowmeter in an Industrial Scale Dilute Phase Pneumatic Conveying System
McGlinchey D, Pugh J, Knight L, Cowell A, Zheng YN, Liu Q
Particulate Science and Technology, 31(3), 271, 2013 |
