| 1 |
Analytical Model of Modular Spoke-Type Permanent Magnet Machines for In-Wheel Traction Applications
Zhang HL, Hua W, Gerada D, Xu ZY, Geradae C
IEEE Transactions on Energy Conversion, 35(3), 1289, 2020 |
| 2 |
Comparative Study of Consequent-Pole and Hybrid-Pole Permanent Magnet Machines
Li J, Wang K, Liu C
IEEE Transactions on Energy Conversion, 34(2), 701, 2019 |
| 3 |
Improving the Thermal Performance of Rotary and Linear Air-Cored Permanent Magnet Machines for Direct Drive Wind and Wave Energy Applications
Mueller MA, Burchell J, Chong YC, Keysan O, McDonald A, Galbraith M, Subiabre EJPE
IEEE Transactions on Energy Conversion, 34(2), 773, 2019 |
| 4 |
Characterization of a Hybrid PM Generator Using a 32-Phase Brushless Excitation Scheme
Al-Adsani AS, Beik O
IEEE Transactions on Energy Conversion, 34(3), 1391, 2019 |
| 5 |
Design of Doubly Complementary Stator-PM Machine With High Magnet Utilization Factor for Low-Cost Applications
Sheng TT, Niu SX
IEEE Transactions on Energy Conversion, 33(2), 567, 2018 |
| 6 |
Torque Improvement and Cost Reduction of Permanent Magnet Machines With a Dovetailed Consequent-Pole Rotor
Li J, Wang K, Liu C
IEEE Transactions on Energy Conversion, 33(4), 1628, 2018 |
| 7 |
Analytical Modeling of Slotless Eccentric Surface-Mounted PM Machines Using a Conformal Transformation
Jalali P, Boroujeni ST, Bianchi N
IEEE Transactions on Energy Conversion, 32(2), 658, 2017 |
| 8 |
Analysis of Global and Local Force Harmonics and Their Effects on Vibration in Permanent Magnet Synchronous Machines
Zou JB, Lan H, Xu YX, Zhao B
IEEE Transactions on Energy Conversion, 32(4), 1523, 2017 |
| 9 |
Magnetic Design Aspects of the Trans-Rotary Magnetic Gear
Pakdelian S, Frank NW, Toliyat HA
IEEE Transactions on Energy Conversion, 30(1), 41, 2015 |
| 10 |
Eccentricity in Synchronous Reluctance Motors-Part II: Different Rotor Geometry and Stator Windings
Mahmoud H, Bianchi N
IEEE Transactions on Energy Conversion, 30(2), 754, 2015 |
