| 1 |
Controlling micro ceramic patterns via multiple/sequential drop-on-demand inkjet printing of dilute colloidal suspensions
Hill TY, Reitz TL, Huang H
Materials Research Bulletin, 84, 437, 2016 |
| 2 |
Sr2-XLaXMgMoO6 and Sr2-XLaXMgNbO6 for Use as Sulfur-Tolerant Anodes Without a Buffer Layer
Howell TG, Kuhnell CP, Reitz TL, Eigenbrodt BC, Singh RN
Journal of the American Ceramic Society, 97(11), 3636, 2014 |
| 3 |
Aerosol Jet (R) Printing of functionally graded SOFC anode interlayer and microstructural investigation by low voltage scanning electron microscopy
Sukeshini AM, Meisenkothen F, Gardner P, Reitz TL
Journal of Power Sources, 224, 295, 2013 |
| 4 |
A(2)MgMoO(6) (A = Sr,Ba) for use as sulfur tolerant anodes
Howell TG, Kuhnell CP, Reitz TL, Sukeshini AM, Singh RN
Journal of Power Sources, 231, 279, 2013 |
| 5 |
Mechanisms of Fatty Acid and Triglyceride Dispersant Bonding in Non-Aqueous Dispersions of NiO
Deiner LJ, Piotrowski KA, Reitz TL
Journal of the American Ceramic Society, 96(3), 750, 2013 |
| 6 |
Strontium- and Manganese-Doped Lanthanum Gallate as a Potential Anode Material for Intermediate-Temperature Solid Oxide Fuel Cells
Dong XH, Gardner P, Reitz TL, Huang KV, Chen FL
Journal of the American Ceramic Society, 94(4), 1114, 2011 |
| 7 |
Inkjet Printing of Anode Supported SOFC: Comparison of Slurry Pasted Cathode and Printed Cathode
Sukeshini AM, Cummins R, Reitz TL, Miller RM
Electrochemical and Solid State Letters, 12(12), B176, 2009 |
| 8 |
Ink-Jet Printing: A Versatile Method for Multilayer Solid Oxide Fuel Cells Fabrication
Sukeshini MA, Cummins R, Reitz TL, Miller RM
Journal of the American Ceramic Society, 92(12), 2913, 2009 |
| 9 |
Heterogeneous electrolyte (YSZ-Al2O3) based direct oxidation solid oxide fuel cell
Thokchom JS, Xiao H, Rottmayer A, Reitz TL, Kumar B
Journal of Power Sources, 178(1), 26, 2008 |
| 10 |
Polarization measurements of anode-supported solid oxide fuel cells studied by incorporation of a reference electrode
Xiao HM, Reitz TL, Rottmayer MA
Journal of Power Sources, 183(1), 49, 2008 |
