| 1 |
Shape classification of fumed silica abrasive and its effects on chemical mechanical polishing
Kim E, Lee J, Park Y, Shin C, Yang J, Kim T
Powder Technology, 381, 451, 2021 |
| 2 |
Effects of CO2 on soot formation in ethylene pyrolysis
Mei JY, You XQ, Law CK
Combustion and Flame, 215, 28, 2020 |
| 3 |
Quantitative measurement of particle size distributions of carbonaceous nanoparticles during ethylene pyrolysis in a laminar flow reactor
Mei JY, Wang MD, You XQ, Law CK
Combustion and Flame, 200, 15, 2019 |
| 4 |
Post-treatment of anaerobic membrane bioreactor (AnMBR) effluent using activated carbon
Mai DT, Kunacheva C, Stuckey DC
Bioresource Technology, 266, 75, 2018 |
| 5 |
Ejector-based sampling from low-pressure aerosol reactors
Rosenberger T, Munzer A, Kiesler D, Wiggers H, Kruis FE
Journal of Aerosol Science, 123, 105, 2018 |
| 6 |
Assessment of microbial products in the biosorption process of Cu(II) onto aerobic granular sludge: Extracellular polymeric substances contribution and soluble microbial products release
Huang LX, Li ML, Si GC, Wei JL, Ngo HH, Guo WS, Xu WY, Du B, Wei Q, Wei D
Journal of Colloid and Interface Science, 527, 87, 2018 |
| 7 |
Optimal biogas sparging strategy, and the correlation between sludge and fouling layer properties in a submerged anaerobic membrane bioreactor (SAnMBR)
Zhang Q, Tan GH, Stuckey DC
Chemical Engineering Journal, 319, 248, 2017 |
| 8 |
Effect of feed pH on reactor performance and production of soluble microbial products (SMPs) in a submerged anaerobic membrane bioreactor
Kunacheva C, Soh YNA, Stuckey DC
Chemical Engineering Journal, 320, 135, 2017 |
| 9 |
Electrospray ICP-MS and SPMS for the In Situ Production of Nanoparticles and Simultaneous On-line Measurements of Its Elemental Signals and Particle Sizes
Zhu YB
Chemistry Letters, 46(4), 569, 2017 |
| 10 |
Measurement of the size distribution, volume fraction and optical properties of soot in an 80 kW propane flame
Backstrom D, Gunnarsson A, Gall D, Pei XY, Johansson R, Andersson K, Pathak RK, Pettersson JBC
Combustion and Flame, 186, 325, 2017 |
