| 1 |
Investigations of multiple injection strategies for the improvement of combustion and exhaust emissions characteristics in a low compression ratio (CR) engine
Suh HK
Applied Energy, 88(12), 5013, 2011 |
| 2 |
Nozzle flow and atomization characteristics of ethanol blended biodiesel fuel
Park SH, Suh HK, Lee CS
Renewable Energy, 35(1), 144, 2010 |
| 3 |
MODELING OF GROUP-HOLE-NOZZLE SPRAYS USING GRID-SIZE-, HOLE-LOCATION-, AND TIME-STEP-INDEPENDENT MODELS
Park SW, Suh HK, Lee CS, Abani N, Reitz RD
Atomization and Sprays, 19(6), 567, 2009 |
| 4 |
Effect of Spray and EGR Rate on the Combustion and Emission Characteristics of Biodiesel Fuel in a Compression Ignition Engine
Yoon SH, Suh HK, Lee CS
Energy & Fuels, 23, 1486, 2009 |
| 5 |
Atomization and Evaporation Characteristics of Biodiesel and Dimethyl Ether Compared to Diesel Fuel in a High-Pressure Injection System
Kim HJ, Park SH, Suh HK, Lee CS
Energy & Fuels, 23, 1734, 2009 |
| 6 |
Effect of Bioethanol-Biodiesel Blending Ratio on Fuel Spray Behavior and Atomization Characteristics
Park SH, Suh HK, Lee CS
Energy & Fuels, 23(8), 4092, 2009 |
| 7 |
Influence of ambient flow conditions on the droplet atomization characteristics of dimethyl ether (DME)
Suh HK, Park SH, Kim HJ, Lee CS
Fuel, 88(6), 1070, 2009 |
| 8 |
Effect of cavitating flow on the flow and fuel atomization characteristics of biodiesel and diesel fuels
Park SH, Suh HK, Lee CS
Energy & Fuels, 22(1), 605, 2008 |
| 9 |
An experimental and numerical investigation of atomization characteristics of biodiesel, dimethyl ether, and biodiesel-ethanol blended fuel
Kim HJ, Suh HK, Park SH, Lee CS
Energy & Fuels, 22(3), 2091, 2008 |
| 10 |
Numerical and experimental study on the comparison between diesel and dimethyl ether (DME) spray behaviors according to combustion chamber shape
Kim HJ, Suh HK, Lee CS
Energy & Fuels, 22(4), 2851, 2008 |
