| 1 |
Numerical Study of Nanofluid Convective Heat Transfer in Sinusoidal Tubes
Habibi MR, Salimpour MR
Heat Transfer Engineering, 40(15), 1259, 2019 |
| 2 |
Experimental study of the time period of continued heating rate on the boiling characteristics of saturated water
Ayoobi A, Khorasani AF, Tavakoli MR, Salimpour MR
International Journal of Heat and Mass Transfer, 137, 318, 2019 |
| 3 |
Microchannel thermal performance optimization utilizing porous layer configurations
Ghorbani M, Salimpour MR, Vafai K
International Journal of Heat and Mass Transfer, 133, 62, 2019 |
| 4 |
Multi-Objective Optimization of R-404A Vapor Condensation in Swirling Flow Using Genetic Algorithms
Yarmohammadi S, Farhadi M, Hajimiri H, Salimpour MR
Heat Transfer Engineering, 38(2), 137, 2017 |
| 5 |
Design of novel geometries for microchannel heat sinks used for cooling diode lasers
Beni SB, Bahrami A, Salimpour MR
International Journal of Heat and Mass Transfer, 112, 689, 2017 |
| 6 |
Analytical optimization of constructal channels used for cooling a ring shaped body based on minimum flow and thermal resistances
Salimpour MR, Menbari A
Energy, 81, 645, 2015 |
| 7 |
An experimental study on the effect of ultrasonication on thermal conductivity of ferrofluid loaded with carbon nanotubes
Shahsavar A, Salimpour MR, Saghafian M, Shafii MB
Thermochimica Acta, 617, 102, 2015 |
| 8 |
Constructal design of cooling channels embedded in a ring-shaped heat-generating body
Salimpour MR, Menbari A
Energy, 73, 302, 2014 |
| 9 |
A novel approach for prediction of 3-D skin structure burning with embedded branched vasculature
Zare M, Daneshi M, Shirani E, Salimpour MR
International Journal of Heat and Mass Transfer, 78, 468, 2014 |
| 10 |
Detailed analysis for the cooling performance enhancement of a heat source under a thick plate
Hajmohammadi MR, Salimpour MR, Saber M, Campo A
Energy Conversion and Management, 76, 691, 2013 |
