| 1 |
Tunable Diode Laser Absorption Spectroscopy Diagnostics of Potassium, Carbon Monoxide, and Soot in Oxygen-Enriched Biomass Combustion Close to Stoichiometry
Sepman A, Ogren Y, Qu ZC, Wiinikka H, Schmidt FM
Energy & Fuels, 33(11), 11795, 2019 |
| 2 |
Distribution of temperature, H2O and atomic potassium during entrained flow biomass combustion - Coupling in situ TDLAS with modeling approaches and ash chemistry
Qu ZC, Holmgren P, Skoglund N, Wagner DR, Brostrom M, Schmidt FM
Combustion and Flame, 188, 488, 2018 |
| 3 |
Gas phase combustion in the vicinity of a biomass particle during devolatilization - Model development and experimental verification
Fatehi H, Schmidt FM, Bai XS
Combustion and Flame, 196, 351, 2018 |
| 4 |
Comparison of Measurement Techniques for Temperature and Soot Concentration in Premixed, Small-Scale Burner Flames
Ogren Y, Sepman A, Qu ZC, Schmidt FM, Wiinikka H
Energy & Fuels, 31(10), 11328, 2017 |
| 5 |
An optimization method with experimental validation for the design of extrusion wire coating dies for a range of different materials and operating conditions
Lebaal N, Puissant S, Schmidt FM, Schlafli D
Polymer Engineering and Science, 52(12), 2675, 2012 |
| 6 |
Evaluation of viscous and elastic parameters of a borosilicate glass above transition temperature using optical instrumented squeeze tests
Dusserre G, Bernhart G, Schmidt FM, Dour G
Journal of Non-Newtonian Fluid Mechanics, 166(21-22), 1229, 2011 |
| 7 |
Optimization of Preform Temperature Distribution for the Stretch-Blow Molding of PET Bottles: Infrared Heating and Blowing Modeling
Bordival M, Schmidt FM, Le Maoult Y, Velay V
Polymer Engineering and Science, 49(4), 783, 2009 |
| 8 |
A Simplified Method to Determine the 3D Orientation of an Injection Molded Fiber-Filled Polymer
Regnier G, Dray D, Jourdain E, Le Roux S, Schmidt FM
Polymer Engineering and Science, 48(11), 2159, 2008 |
| 9 |
Elastomer biaxial characterization using bubble inflation technique. I: Experimental investigations
Reuge N, Schmidt FM, Le Maoult Y, Rachik M, Abbe F
Polymer Engineering and Science, 41(3), 522, 2001 |
| 10 |
Experimental study and numerical simulation of the injection stretch/blow molding process
Schmidt FM, Agassant JF, Bellet M
Polymer Engineering and Science, 38(9), 1399, 1998 |
