| 1 |
A critical review of existing strategies for emission control in the monoethanolamine-based carbon capture process and some recommendations for improved strategies
Sharma SD, Azzi M
Fuel, 121, 178, 2014 |
| 2 |
Design and performance evaluation of dry cleaning process for syngas
Sharma SD, McLennan K, Dolan M, Nguyen T, Chase D
Fuel, 108, 42, 2013 |
| 3 |
Recent developments in dry hot syngas cleaning processes
Sharma SD, Dolan M, Ilyushechkin AY, McLennan KG, Nguyen T, Chase D
Fuel, 89(4), 817, 2010 |
| 4 |
Glass-Based Processing of Mixed-Oxide Desulfurization Sorbents
Dolan MD, Ilyushechkin AY, McLennan KG, Nguyen T, Sharma SD
Industrial & Engineering Chemistry Research, 48(23), 10498, 2009 |
| 5 |
Photodegradation of dye pollutant under UV light by nano-catalyst doped titania thin films
Sharma SD, Saini KK, Kant C, Sharma CP, Jain SC
Applied Catalysis B: Environmental, 84(1-2), 233, 2008 |
| 6 |
A critical review of syngas cleaning technologies - fundamental limitations and practical problems
Sharma SD, Dolan M, Park D, Morpeth L, Ilyushechkin A, McLennan K, Harris DJ, Thambimuthu KV
Powder Technology, 180(1-2), 115, 2008 |
| 7 |
Pressure distribution analysis of fiber reinforced plastic components made by rubber pressure moulding technique
Kar KK, Sharma SD, Kumar P, Ramkumar J, Appaji RK, Reddy KRN
Journal of Applied Polymer Science, 105(6), 3333, 2007 |
| 8 |
Sol-gel-derived super-hydrophilic nickel doped TiO2 film as active photo-catalyst
Sharma SD, Singh D, Saini KK, Kant C, Sharma V, Jain SC, Sharma CP
Applied Catalysis A: General, 314(1), 40, 2006 |
| 9 |
Effect of thermo physical properties of heat exchanger material on the performance of latent heat storage system using an enthalpy method
Sharma A, Sharma SD, Buddhi D, Won LD
International Journal of Energy Research, 30(3), 191, 2006 |
| 10 |
Development of rubber pressure molding technique using butyl rubber to fabricate fiber reinforced plastic components based on glass fiber and epoxy resin
Kar KK, Sharma SD, Behera SK, Kumar P
Journal of Applied Polymer Science, 101(2), 1095, 2006 |
