| 1 |
Toward autothermal and hydrogen-producing sorbent regeneration for calcium-looping
Ebneyamini A, Grace J, Ellis N, Lim CJ
Canadian Journal of Chemical Engineering, 99(1), 345, 2021 |
| 2 |
Enhanced CO2 sorption capacity of amine-tethered fly ash residues derived from co-firing of coal and biomass blends
Zhao CW, Guo YF, Yan JJ, Sun J, Li WL, Lu P
Applied Energy, 242, 453, 2019 |
| 3 |
Study on the regenerable sulfur-resistant sorbent for mercury removal from nonferrous metal smelting flue gas
Quan ZW, Huang WJ, Liao Y, Liu W, Xu HM, Yan NQ, Qu Z
Fuel, 241, 451, 2019 |
| 4 |
Facile synthesis of silica aerogel supported K2CO3 sorbents with enhanced CO2 capture capacity for ultra-dilute flue gas treatment
Guo YF, Zhao CW, Sun J, Li WL, Lu P
Fuel, 215, 735, 2018 |
| 5 |
Biomass derived wood ash with amine modification for post-combustion CO2 capture
Wang P, Guo YF, Zhao CW, Yan JJ, Lu P
Applied Energy, 201, 34, 2017 |
| 6 |
Removal of ionizable aromatic pollutants from contaminated water using nano gamma-Fe2O3 based magnetic cationic hydrogel: Sorptive performance, magnetic separation and reusability
Khan M, Lo IMC
Journal of Hazardous Materials, 322, 195, 2017 |
| 7 |
Three-dimensional CFD simulation of an MgO-based sorbent regeneration reactor in a carbon capture process
Ghadirian E, Abbasian J, Arastoopour H
Powder Technology, 318, 314, 2017 |
| 8 |
Understanding the deactivation of K2CO3/AC for low-concentration CO2 removal in the presence of trace SO2 and NO2
Guo YF, Li CH, Lu SX, Zhao CW
Chemical Engineering Journal, 301, 325, 2016 |
| 9 |
Steam methane reforming reaction enhanced by a novel K2CO3-Doped Li4SiO4 sorbent: Investigations on the sorbent and catalyst coupling behaviors and sorbent regeneration strategy
Zhang Q, Shen C, Zhang S, Wu YQ
International Journal of Hydrogen Energy, 41(8), 4831, 2016 |
| 10 |
Sulfidation and regeneration of iron-based sorbents supported on activated-chars prepared by pressurized impregnation for coke oven gas desulfurization
Dou J, Zhao Y, Tahmasebi A, Yu J
Korean Journal of Chemical Engineering, 33(10), 2849, 2016 |
