| 1 |
A New Prediction Model of Water Breakthrough Time of Horizontal Well in Inclined Edge-Water Low Permeability Gas Reservoir
Liu F, Yang F, Zhang Y, Liu X, Sun B
Chemistry and Technology of Fuels and Oils, 56(6), 941, 2021 |
| 2 |
Transient electrophoresis of a charged porous particle
Lai YC, Keh HJ
Electrophoresis, 41(3-4), 259, 2020 |
| 3 |
Effect analysis on cold starting performance enhancement of a diesel engine fueled with biodiesel fuel based on an improved thermodynamic model
Jiaqiang E, Liu GL, Zhang ZQ, Han DD, Chen JW, Wei KX, Gong JK, Yin ZB
Applied Energy, 243, 321, 2019 |
| 4 |
Effect analysis on cold starting performance enhancement of a diesel engine fueled with biodiesel fuel based on an improved thermodynamic model
Jiaqiang E, Liu GL, Zhang ZQ, Han DD, Chen JW, Wei KX, Gong JK, Yin ZB
Applied Energy, 243, 321, 2019 |
| 5 |
Comprehensive Monitoring of Field Winding Short Circuits for Salient Pole Synchronous Motors
Yun J, Park S, Yang C, Park Y, Lee SB, Sasic M, Stone GC
IEEE Transactions on Energy Conversion, 34(3), 1686, 2019 |
| 6 |
A review on technology, configurations, and performance of cross-flow hydrokinetic turbines
Saini G, Saini RP
International Journal of Energy Research, 43(13), 6639, 2019 |
| 7 |
Lapping flow and starting plume on an evenly heated horizontal plate
Jiang YH, Nie BC, Xu F
International Journal of Heat and Mass Transfer, 138, 235, 2019 |
| 8 |
A novel approach to determine optimal protein texturization conditions - A critical moisture level with increased effect of temperature on viscosity reduction in the rubbery state
Oterhals A, Ahmad R, Samuelsen TA
Journal of Food Engineering, 261, 66, 2019 |
| 9 |
Process development of fabricating ceramic core using 3D printing technique
Park HY, Kim EH, Cho GH, Jung YG, Zhang J
Materials Chemistry and Physics, 231, 382, 2019 |
| 10 |
Reducing porosity at the starting layers above supporting bars of the parts made by Selective Laser Melting
Pal S, Lojen G, Kokol V, Drstvengek I
Powder Technology, 355, 268, 2019 |
