| 1 |
Failure and stress analysis of internal pressurized composite pipes joined with sleeves
Sulu IY, Temiz S
Journal of Adhesion Science and Technology, 32(8), 816, 2018 |
| 2 |
Stress analysis of adhesively bonded double strap joints with or without intermediate part subjected to tensile loading
Citil S, Ayaz Y, Temiz S
Journal of Adhesion, 93(5), 343, 2017 |
| 3 |
Increasing single-lap joint strength by adherend curvature-induced residual stresses
Temiz S, Akpinar S, Aydin MD, Sancaktar E
Journal of Adhesion Science and Technology, 27(3), 244, 2013 |
| 4 |
Effect of protrusion at the ends of bondline in single lap joints under tension and bending
Akpinar S, Temiz S, Aydin MD, Ozel A
Journal of Adhesion Science and Technology, 26(23), 2591, 2012 |
| 5 |
Determination of Mechanical Properties of Double-Strap Adhesive Joints with an Embedded Patch
Citil S, Temiz S, Altun H, Ozel A
Journal of Adhesion Science and Technology, 25(18), 2555, 2011 |
| 6 |
Effect of curing pressure on the strength of adhesively bonded joints
Aydin MD, Temiz S, Ozel A
Journal of Adhesion, 83(6), 553, 2007 |
| 7 |
Application of bi-adhesive in double-strap joints subjected to bending moment
Temiz S
Journal of Adhesion Science and Technology, 20(14), 1547, 2006 |
| 8 |
Effect of overlap length on durability of joints bonded with a pressure-sensitive adhesive
Ozel A, Temiz S, Aydin MD
Journal of Adhesion Science and Technology, 19(1), 57, 2005 |
| 9 |
The effect of adherend thickness on the failure of adhesively-bonded single-lap joints
Aydin MD, Ozel A, Temiz S
Journal of Adhesion Science and Technology, 19(8), 705, 2005 |
| 10 |
The effects of overlap length and adherend thickness on the strength of adhesively bonded joints subjected to bending moment
Ozel A, Aydin MD, Temiz S
Journal of Adhesion Science and Technology, 18(3), 313, 2004 |
