| 1 |
Steam reforming of methanol using supported Mo2C catalysts
Lin SSY, Thomson WJ, Hagensen TJ, Ha SY
Applied Catalysis A: General, 318, 121, 2007 |
| 2 |
Kinetic study of a ceria-promoted Mo2C/gamma-Al2O3 catalyst in dry-methane reforming
Darujati ARS, Thomson WJ
Chemical Engineering Science, 61(13), 4309, 2006 |
| 3 |
Hydrogen generation from 2,2,4-trimethyl pentane reforming over molybdenum carbide at low steam-to-carbon ratios
Cheekatamarla PK, Thomson WJ
Journal of Power Sources, 156(2), 520, 2006 |
| 4 |
Catalytic activity of molybdenum carbide for hydrogen generation via diesel reforming
Cheekatamarla PK, Thomson WJ
Journal of Power Sources, 158(1), 477, 2006 |
| 5 |
Solid acid characteristics and isobiatane/butene alkylation
Platon A, Thomson WJ
Applied Catalysis A: General, 282(1-2), 93, 2005 |
| 6 |
Poisoning effect of thiophene on the catalytic activity of molybdenum carbide during tri-methyl pentane reforming for hydrogen generation
Cheekatamarla PK, Thomson WJ
Applied Catalysis A: General, 287(2), 176, 2005 |
| 7 |
Low-temperature test reaction for hydride transfer on solid acid catalysts
Platon A, Thomson WJ
Catalysis Letters, 101(1-2), 15, 2005 |
| 8 |
Dry reforming kinetics over a bulk molybdenum carbide catalyst
LaMont DC, Thomson WJ
Chemical Engineering Science, 60(13), 3553, 2005 |
| 9 |
The influence of mass transfer conditions on the stability of molybdenum carbide for dry methane reforming
LaMont DC, Thomson WJ
Applied Catalysis A: General, 274(1-2), 173, 2004 |
| 10 |
The effects of sulfur and oxygen on the catalytic activity of molybdenum carbide during dry methane reforming
Pritchard ML, McCauley RL, Gallaher BN, Thomson WJ
Applied Catalysis A: General, 275(1-2), 213, 2004 |
