검색결과 : 14건
No. | Article |
---|---|
1 |
Estimation of trickle-to-pulse flow regime transition and pressure drop in high-pressure trickle bed reactors with organic liquids Urseanu MI, Boelhouwer JG, Bosman HJM, Schroijen JC, Kwant G Chemical Engineering Journal, 111(1), 5, 2005 |
2 |
Induced pulse operation of high-pressure trickle bed reactors with organic liquids: hydrodynamics and reaction study Urseanu MI, Boelhouwer JG, Bosman HJM, Schroijen JC Chemical Engineering and Processing, 43(11), 1411, 2004 |
3 |
Conversion rate and mass transfer limitation in trickle bed reactors in the presence of a fast reaction Banchero M, Manna L, Sicardi S, Boelhouwer JG, Urseanu MI, Kwant G Chemical Engineering Science, 59(22-23), 5411, 2004 |
4 |
Influence of operating pressure on the gas hold-up in bubble columns for high viscous media Urseanu MI, Guit RPM, Stankiewicz A, van Kranenburg G, Lommen JHGM Chemical Engineering Science, 58(3-6), 697, 2003 |
5 |
A structured catalytic bubble column reactor: hydrodynamics and mixing studies Urseanu MI, Ellenberger J, Krishna R Catalysis Today, 69(1-4), 105, 2001 |
6 |
Scale effects on the hydrodynamics of bubble columns operating in the homogeneous flow regime Krishna R, van Baten JM, Urseanu MI Chemical Engineering & Technology, 24(5), 451, 2001 |
7 |
Design and scale up of a bubble column slurry reactor for Fischer-Tropsch synthesis Krishna R, van Baten JM, Urseanu MI, Ellenberger J Chemical Engineering Science, 56(2), 537, 2001 |
8 |
Gas hold-up in bubble columns: Operation with concentrated slurries versus high viscosity liquid Krishna R, Urseanu MI, de Swart JWA, Ellenberger J Canadian Journal of Chemical Engineering, 78(3), 442, 2000 |
9 |
Gas hold-up in bubble columns: influence of alcohol addition versus operation at elevated pressures Krishna R, Urseanu MI, Dreher AJ Chemical Engineering and Processing, 39(4), 371, 2000 |
10 |
Rise velocity of single circular-cap bubbles in two-dimensional beds of powders and liquids Krishna R, van Baten JM, Urseanu MI, Ellenberger J Chemical Engineering and Processing, 39(5), 433, 2000 |