| 1 |
Analysis of storage capacity and energy conversion on the performance of gradient and double-layered porous electrode in all vanadium redox flow batteries
Chen W, Kang JL, Shu Q, Zhang YS
Energy, 180, 341, 2019 |
| 2 |
Dynamic control strategy for the electrolyte flow rate of vanadium redox flow batteries
Wang T, Fu JH, Zheng ML, Yu ZT
Applied Energy, 227, 613, 2018 |
| 3 |
Validating and improving a zero-dimensional stack voltage model of the Vanadium Redox Flow Battery
Konig S, Suriyah MR, Leibfried T
Journal of Power Sources, 378, 10, 2018 |
| 4 |
Full cell simulation and the evaluation of the buffer system on air-cathode microbial fuel cell
Ou SQ, Kashima H, Aaron DS, Regan JM, Mench MM
Journal of Power Sources, 347, 159, 2017 |
| 5 |
Studies on pressure losses and flow rate optimization in vanadium redox flow battery
Tang A, Bao J, Skyllas-Kazacos M
Journal of Power Sources, 248, 154, 2014 |
| 6 |
Increasing the rate capability of batteries with electrolyte flow
Kim SU, Monroe CW
Applied Energy, 103, 207, 2013 |
| 7 |
Air-breathing membraneless laminar flow-based fuel cells: Do they breathe enough oxygen?
Xuan J, Leung DYC, Wang HZ, Leung MKH, Wang B, Ni M
Applied Energy, 104, 400, 2013 |
| 8 |
Effects of heat treatment time on electrochemical properties and electrode structure of polytetrafluoroethylene-bonded membrane electrode assemblies for polybenzimidazole-based high-temperature proton exchange membrane fuel cells
Kim M, Jeong G, Eom K, Cho E, Ryu J, Kim HJ, Kwon H
International Journal of Hydrogen Energy, 38(28), 12335, 2013 |
| 9 |
Optimization of physical parameters of solid oxide fuel cell electrode using electrochemical model
Jo DH, Chun JH, Park KT, Hwang JW, Lee JY, Jung HW, Kim SH
Korean Journal of Chemical Engineering, 28(9), 1844, 2011 |
| 10 |
Analytical modeling of PEM fuel cell i-V curve
Haji S
Renewable Energy, 36(2), 451, 2011 |
