검색결과 : 10건
| No. | Article |
|---|---|
| 1 |
Cutting fluid corrosion inhibitors from inorganic to organic: Progress and applications Li H, Zhang Y, Li C, Zhou Z, Nie X, Chen Y, Cao H, Liu B, ZhangN, Said Z, Denath S, Jamil M, Ali HM, Sharma S Korean Journal of Chemical Engineering, 39(5), 1107, 2022 |
| 2 |
Regeneration and purification of water-soluble cutting fluid through ozone treatment using an air dielectric barrier discharge Ma S, Kim K, Huh J, Kim DE, Lee S, Hong Y Separation and Purification Technology, 199, 289, 2018 |
| 3 |
An overview of current status of cutting fluids and cooling techniques of turning hard steel Liew PJ, Shaaroni A, Sidik NAC, Yan JW International Journal of Heat and Mass Transfer, 114, 380, 2017 |
| 4 |
Experimental investigation of thermal properties of cutting fluid using soluble oil-based TiO2 nanofluid Salimi-Yasar H, Heris SZ, Shanbedi M, Amiri A, Kameli A Powder Technology, 310, 213, 2017 |
| 5 |
A Numerical Calibration Approach to Obtain Cutting Fluid Droplet Sizes in a Turning Process via an Imaging System Ju CX, Michalek DJ, Sutherland JW Particle & Particle Systems Characterization, 29(4), 273, 2012 |
| 6 |
Torch Design Modification Using Micro-jets to Suppress Fluid Dynamic Instabilities in Plasma Arc Cutting Kim S, Heberlein J, Lindsay J, Peters J Plasma Chemistry and Plasma Processing, 32(1), 45, 2012 |
| 7 |
UTILIZATION OF CUTTING FLUIDS WITH MODIFIED DIATOMITE Buzaeva MV, Pis'menko VT, Klimov ES Chemistry and Technology of Fuels and Oils, 47(1), 75, 2011 |
| 8 |
Cutting Fluid Effluent Removal by Adsorption on Chitosan and SDS-Modified Chitosan Piyamongkala K, Mekasut L, Pongstabodee S Macromolecular Research, 16(6), 492, 2008 |
| 9 |
Development of an imaging system and its application in the study of cutting fluid atomization in a turning process Ju C, Sun J, Michalek DJ, Sutherland JW Particulate Science and Technology, 26(4), 318, 2008 |
| 10 |
Hydrothermal oxidation: Application to the treatment of different cutting fluid wastes Sanchez-Oneto J, Portela JR, Nebot E, de la Ossa EM Journal of Hazardous Materials, 144(3), 639, 2007 |