| 1 |
Evolution of the Classification of Flammable and Combustible Liquids in Russia
Alexeev S, Smirnov V, Barbin N, Alexeeva D
Process Safety Progress, 37(2), 230, 2018 |
| 2 |
Suppression of Overpressure During a Vapor Cloud Explosion A New Approach
Baron N, Buchwald CR
Process Safety Progress, 36(1), 54, 2017 |
| 3 |
Atmospheric tank failures: Mechanisms and an unexpected case study
Schmidt MS
Process Safety Progress, 36(4), 353, 2017 |
| 4 |
Method for CFD facilitated pressure rise calculation due to deflagration in heat recovery steam generator
Zhou W, Cardenas M, Moyeda D
Process Safety Progress, 36(4), 408, 2017 |
| 5 |
A lesson learned by attending 37 years of loss prevention symposia
Pratt TH
Process Safety Progress, 35(1), 5, 2016 |
| 6 |
Calculating Facility Siting Study Leak Sizes-One Size Does Not Fit All
Fitzgerald GA
Process Safety Progress, 35(2), 176, 2016 |
| 7 |
Analysis of Effects of Detonation of Explosive Substances on Humans From Characteristic Curves Explosive Mass-Distance From the Origin of the Explosion
Duperon EG, Gil MM, Frances BG, Ferradas EG
Process Safety Progress, 35(3), 233, 2016 |
| 8 |
Examining the use of blast resistant modules within API 753 zones 1 and 2
Skelton DB
Process Safety Progress, 34(2), 137, 2015 |
| 9 |
Chemical explosion isolation applied to small mills
Taveau JR, Farrell TM
Process Safety Progress, 34(2), 157, 2015 |
| 10 |
Flammable State and Dilution Requirement in the Theoretical Flammability Diagram
Ma TG, Larranaga M
Process Safety Progress, 33(1), 70, 2014 |
