| 1 |
Effect of the process control agent in the ball-milled powders and SPS-consolidation temperature on the grain refinement, density and Vickers hardness of Fe14Cr ODS ferritic alloys
Mihalache V, Mercioniu I, Velea A, Palade P
Powder Technology, 347, 103, 2019 |
| 2 |
Crystallographic feature of hydrogen-related fracture in 2Mn-0.1C ferritic steel
Okada K, Shibata A, Takeda Y, Tsuji N
International Journal of Hydrogen Energy, 43(24), 11298, 2018 |
| 3 |
Oxidation behviour of sol-gel zirconia coated 9Cr-1Mo ferritic steel in air atmosphere
Singh IB, Ruhi G, Modi OP, Singh M
Indian Journal of Chemical Technology, 23(6), 533, 2016 |
| 4 |
Severe dual atmosphere effect at 600 degrees C for stainless steel 441
Alnegren P, Sattari M, Svensson JE, Froitzheim J
Journal of Power Sources, 301, 170, 2016 |
| 5 |
Slow strain rate tensile test results of new multiphase 17%Cr stainless steel under hydrogen cathodic charging
Tavares SSM, Bastos IN, Pardal JM, Montenegro TR, da Silva MR
International Journal of Hydrogen Energy, 40(47), 16992, 2015 |
| 6 |
Hydrogen embrittlement susceptibility of welded 21/4Cr-1Mo steel under elastic stress
Costa LRO, Lemus LF, dos Santos DS
International Journal of Hydrogen Energy, 40(47), 17128, 2015 |
| 7 |
Controlling chromium vaporization from interconnects with nickel coatings in solid oxide devices
Glazoff MV, Rashkeev SN, Herring JS
International Journal of Hydrogen Energy, 39(27), 15031, 2014 |
| 8 |
Long-term behaviour of solid oxide fuel cell interconnect materials in contact with Ni-mesh during exposure in simulated anode gas at 700 and 800 degrees C
Garcia-Fresnillo L, Shemet V, Chyrkin A, de Haart LGJ, Quadakkers WJ
Journal of Power Sources, 271, 213, 2014 |
| 9 |
Segregation and morphology on the surface of ferritic stainless steel (001)
Fujiyoshi H, Matsui T, Yuhara J
Applied Surface Science, 258(19), 7664, 2012 |
| 10 |
High temperature corrosion of superheater steels by KCl and K2CO3 under dry and wet conditions
Lehmusto J, Yrjas P, Skrifvars BJ, Hupa M
Fuel Processing Technology, 104, 253, 2012 |
