| 1 |
Modeling Rheological Properties of HDPE Based on Polymerization Kinetics
Dernbach M, Kirsch J, Busch M
Chemie Ingenieur Technik, 92(5), 643, 2020 |
| 2 |
A novel method for the management of sulfone-rich waste produced in the oxidative desulfurization (ODS) process
Farahani S, Sobati MA
Chinese Journal of Chemical Engineering, 28(9), 2447, 2020 |
| 3 |
Evolution of the crystalline and amorphous phases of high-density polyethylene subjected to equal-channel angular pressing
Shirazi MMH, Khajouei-Nezhad M, Zebarjad SM, Ebrahimi R
Polymer Bulletin, 77(4), 1681, 2020 |
| 4 |
Solvothermal co-liquefaction of sugarcane bagasse and polyethylene under sub -supercritical conditions: Optimization of process parameters
Baloch HA, Siddiqui MTH, Nizamuddin S, Mubarakb NM, Khalid M, Srinivasan MP, Griffin GJ
Process Safety and Environmental Protection, 137, 300, 2020 |
| 5 |
Catalytic co-pyrolysis of sugarcane bagasse and waste high-density polyethylene over faujasite-type zeolite
Hassan H, Lim JK, Hameed BH
Bioresource Technology, 284, 406, 2019 |
| 6 |
Effect of ethylene vinyl acetate content on the performance of VMD using HDPE co-blending membrane
Tang N, Hua XX, Li Z, Zhang L, Wang JT, Xiang J, Cheng PG, Wang XK
Chinese Journal of Chemical Engineering, 27(5), 1058, 2019 |
| 7 |
Effects of alkali and alkaline earth metals on the co-pyrolysis of cellulose and high density polyethylene using TGA and Py-GC/MS
Lin XN, Kong LS, Cai HZ, Zhang QF, Bi DM, Yi WM
Fuel Processing Technology, 191, 71, 2019 |
| 8 |
Improving the adhesion of polyethylene surfaces using Side-Chain crystalline block copolymer
Hirai S, Ishimoto S, Obuchi H, Yao S
Journal of Adhesion Science and Technology, 33(23), 2567, 2019 |
| 9 |
Which way do fibrils disappear?
Yarysheva AY, Bagrov DV, Kechek'yan PA, Rukhlya EG, Bakirov AV, Yarysheva LM, Chvalun SN, Volynskii AL
Polymer, 169, 234, 2019 |
| 10 |
Plasticized jackfruit seed starch: a viable alternative for the partial replacement of petroleum-based polymer blends
Kahar AWM, Lingeswarran M, Hulwani MZA, Ismail H
Polymer Bulletin, 76(2), 747, 2019 |
