| 1 |
Development of gypsum-based composites with tensile strain-hardening characteristics
Wang YC, Jian XR, Yu JT, Ye JH, Dong FY
Journal of the American Ceramic Society, 103(12), 7115, 2020 |
| 2 |
Functionalized polyethylene fibers for the selective capture of palladium ions from aqueous solution
Pang LJ, Li R, Hu JT, Zhang LJ, Zhang MX, Yang CG, Wu GZ
Applied Surface Science, 433, 116, 2018 |
| 3 |
Fracture resistance of endodontically treated molars restored with polyethylene fiber and different posts
Tuncer AK, Haznedaroglu F, Tuncer S
Journal of Adhesion Science and Technology, 28(19), 1958, 2014 |
| 4 |
Lamellae break induced formation of shish-kebab during hot stretching of ultra-high molecular weight polyethylene precursor fibers investigated by in situ small angle X-ray scattering
Tian Y, Zhu CZ, Gong JH, Yang SL, Ma JH, Xu J
Polymer, 55(16), 4299, 2014 |
| 5 |
Interfacial bond property of UHMWPE composite
Zhu D, Wang YX, Zhang XL, Cheng SJ
Polymer Bulletin, 65(1), 35, 2010 |
| 6 |
The effect of gamma-irradiation on thermal strain of high strength polyethylene fiber at low temperature
Yamanaka A, Izumi Y, Kitagawa T, Terada T, Hirahata H, Ema K, Fujishiro H, Nishijima S
Journal of Applied Polymer Science, 102(1), 204, 2006 |
| 7 |
Research on the molecular entanglement and disentanglement in the dry spinning process of UHMWPE/decalin solution
Sun YS, Duan YR, Chen XY, Zhang Q, Jin XF, Li XJ, Ma Y, Sun L, Wang QR
Journal of Applied Polymer Science, 102(1), 864, 2006 |
| 8 |
Chain orientation in polyethylene fibers prepared by ethylene nanoextrusion polymerization
Ye ZB, Zhu SP, Britten JF
Macromolecular Rapid Communications, 27(15), 1217, 2006 |
| 9 |
The heat capacity of polyethylene fibers measured by multi-frequency temperature-modulated calorimetry
Pyda M, Nowak-Pyda E, Wunderfich B
Thermochimica Acta, 442(1-2), 35, 2006 |
| 10 |
Investigation on dry spinning process of ultrahigh molecular weight polyethylene/decalin solution
Sun YS, Wang QR, Li XJ, Chen XY, Ma Y, Zhang Q, Jin XF, Jiang Y, Sun L, Luo Q
Journal of Applied Polymer Science, 98(1), 474, 2005 |
