1 |
Comprehensive assessment of the impact of operating parameters on sub 1 kW compact ORC performance Jang Y, Lee J Energy Conversion and Management, 182, 369, 2019 |
2 |
Correlations for estimating the specific capital cost of multi-effect distillation plants considering the main design trends and operating conditions Kosmadakis G, Papapetrou M, Ortega-Delgado B, Cipollina A, Alarcon-Padilla DC Desalination, 447, 74, 2018 |
3 |
An evolutionary keyhole-mode heat transfer model in continuous plasma arc welding Li Y, Feng YH, Zhang XX, Wu CS International Journal of Heat and Mass Transfer, 117, 1188, 2018 |
4 |
Effects of the generator and evaporator temperature differences on a double absorption heat transformer-Different control strategies on utilizing heat sources Wang HZ, Li HS, Bu XB, Wang LB Energy Conversion and Management, 138, 12, 2017 |
5 |
Solar driven air conditioning and refrigeration systems corresponding to various heating source temperatures Wang RZ, Xu ZY, Pan QW, Du S, Xia ZZ Applied Energy, 169, 846, 2016 |
6 |
Performance investigation and exergy analysis of two-stage desiccant wheel systems Liu XH, Zhang T, Zheng YW, Tu R Renewable Energy, 86, 877, 2016 |
7 |
Influence of the number of stages on the heat source temperature of desiccant wheel dehumidification systems using exergy analysis Tu R, Liu XH, Jiang Y, Ma F Energy, 85, 379, 2015 |
8 |
Optimal Heat Source Temperature for thermodynamic optimization of sub-critical Organic Rankine Cycles Liu W, Meinel D, Gleinser M, Wieland C, Spliethoff H Energy, 88, 897, 2015 |
9 |
Investigation of hydrofluoroolefins as potential working fluids in organic Rankine cycle for geothermal power generation Liu W, Meinel D, Wieland C, Spliethoff H Energy, 67, 106, 2014 |
10 |
Preparation of SnS2 thin films by close-spaced sublimation at different source temperatures Shi CW, Yang PF, Yao M, Dai XY, Chen Z Thin Solid Films, 534, 28, 2013 |