| 927 - 931 |
Greenhouse gas emissions reduction by use of wind and solar energies for hydrogen and electricity production: Economic factors
Granovskii M, Dincer I, Rosen MA |
| 932 - 939 |
Hydrogen production from the fermentation of corn stover biomass pretreated with a steam-explosion process
Datar R, Huang J, Maness PC, Mohagheghi A, Czemik S, Chornet E |
| 940 - 949 |
Enhancing phototrophic hydrogen production of Rhodopseudomonas palustris via statistical experimental design
Chen CY, Lu WB, Wu JF, Chang JS |
| 950 - 957 |
Continuous hydrogen production by anaerobic mixed microflora using a hollow-fiber microfiltration membrane bioreactor
Lee KS, Lin PJ, Kai FC, Chang JS |
| 958 - 964 |
Hydrogen production from partial oxidation of dimethyl ether using corona discharge plasma
Zou JJ, Zhang YP, Liu CJ |
| 965 - 968 |
Thermal stabilization and hydrogen storage properties of Mg-40 wt%Ti0.28Cr0.50V0.22 composite prepared by mechanical milling
Liu XP, Huang Z, Jiang LJ, Wang SM |
| 969 - 980 |
Steam reforming of ethanol for production of hydrogen over Ni/CeO2-ZrO2 catalyst: Effect of support and metal loading
Biswas P, Kunzru D |
| 981 - 991 |
Autothermal reforming of gasoline on Rh-based monolithic catalysts
Qi AD, Wang SD, Ni CJ, Wu DY |
| 992 - 996 |
Hydrogen production by steam-gasification of petroleum coke using concentrated solar power - III. Reactor experimentation with slurry feeding
Z'Graggen A, Haueter P, Maag G, Vidal A, Romero M, Steinfeld A |
| 997 - 1009 |
Feasibility of renewable energy storage using hydrogen in remote communities in Bhutan
Young DC, Mill GA, Wall R |
| 1010 - 1015 |
Polyaniline-based nanocomposite materials for hydrogen storage
Jurczyk MU, Kumar A, Srinivasan S, Stefanakos E |
| 1016 - 1023 |
Hydrogen storage capacity at high pressure of raw and purified single wall carbon nanotubes produced with a solar reactor
Luxembourg D, Flamant G, Beche E, Sans JL, Giral J, Goetz V |
| 1024 - 1032 |
Hydrogen storage in nickel catalysts supported on activated carbon
Zielinski M, Wojcieszak R, Monteverdi S, Mercy M, Bettahar MM |
| 1033 - 1040 |
Mechanical and thermal decomposition of LiAlH4 with metal halides
Fernandez JRA, Aguey-Zinsou F, Elsaesser M, Ma XZ, Dornheim M, Bormann R |
| 1041 - 1049 |
Influence of intrinsic hydrogenation/dehydrogenation kinetics on the dynamic behaviour of metal hydrides: A semi-empirical model and its verification
Forde T, Maehlen JP, Yartys VA, Lototsky M, Uchida H |
| 1050 - 1058 |
The structure and electrode properties of non-stoichiometric A(1.2)B(2) type C14 Laves alloy and the effect of surface modification
Xu YH, Wang G, Chen CP, Wang QD, Wang XL |
| 1059 - 1066 |
Synergistic effect of Candida maltosa HY-35 and Enterobacter aerogenes W-23 on hydrogen production
Lu WY, Wen JP, Chen Y, Sun B, Jia XQ, Liu MH, Caiyin Q |
| 1067 - 1079 |
Partial oxidation of methane with air for synthesis gas production in a multistage gliding arc discharge system
Sreethawong T, Thakonpatthanakun P, Chavadej S |
| 1080 - 1085 |
Investigations on the structural, microstructural and dehydrogenation/rehydrogenation behavior of Ti doped sodium aluminum hydride materials
Gupta BK, Srivastava ON |
| 1086 - 1094 |
Comparative performance of two upflow anaerobic biohydrogen-producing reactors seeded with different sludges
Wang Y, Mu Y, Yu HQ |
| 1095 - 1102 |
Effect of elliptic burner geometry and air equivalence ratio on the nitric oxide emissions from turbulent hydrogen flames
Hariharan P, Periasamy C, Gollahalli SR |
| 1103 - 1112 |
Acoustics measurements in a lean premixed combustor operated on hydrogen/hydrocarbon fuel mixtures
Wicksall DM, Agrawal AK |
| 1113 - 1120 |
On the development of an International Curriculum on Hydrogen Safety Engineering and its implementation into educational programmes
Dahoe AE, Molkov VV |
