| 2593 - 2603 |
Revisiting emulsion polymerization to produce stable, translucent, nanolatex of partially water-soluble monomers, ethylacrylate-methylmethacrylate
Bhawal S, Dhoble D, Devi S |
| 2604 - 2608 |
Crystallization of a thermoplastic polyimide
Tsai RS, Lee DK, Liu YC, Tsai HB |
| 2609 - 2617 |
Ultraviolet weathering of photostabilized wood-flour-filled high-density polyethylene composites
Stark NM, Matuana LM |
| 2618 - 2628 |
Development of pendant drop mechanical analysis as a technique for determining the stress-relaxation and water-permeation properties of interfacially polymerized barrier layers
Khare VP, Greenberg AR, Krantz WB |
| 2629 - 2633 |
Mechanical properties and structures of dicyanate-clay nanocomposites
Kim DS, Lee KM |
| 2634 - 2642 |
Synthesis and characterization of conducting homopolymers and copolymers of o-anisidine and o-toluidine in inorganic and organic supporting electrolytes
Borole DD, Kapadi UR, Mahulikar PP, Hundiwale DG |
| 2643 - 2647 |
Effect of compatibilizer in acrylonitrile-butadiene-styrene toughened nylon 6 blends: Ductile-brittle transition temperature
Araujo EM, Hage E, Carvalho AJF |
| 2648 - 2656 |
Topology-rheology regression models for monodisperse linear and branched polyethylenes
Bonchev D, Dekmezian AH, Markel E, Faldi A |
| 2657 - 2664 |
Heating characteristics and polymerization of epsilon-caprolactone under microwave irradiation
Liao LQ, Liu LJ, Zhang C, He F, Zhuo RX |
| 2665 - 2675 |
Evolution of properties with increasing cure of a thermosetting epoxy/aromatic amine system: Physical ageing
Lee JK, Gillham JK |
| 2676 - 2683 |
Influence of the nature and the content of carbon fiber on properties of thermoplastic polyurethane-carbon fiber composites
Sanchez-Adsuar MS, Linares-Solano A, Cazorla-Amoros D, Ibarra-Rueda L |
| 2684 - 2690 |
Polymer supported synthesis of mixed ligand complexes
Chacko S, Mathew T, Kuriakose S |
| 2691 - 2702 |
Mass transfer characteristics of natural rubber/ethylene vinyl acetate blends
Sujith A, Radhakrishnan CK, Unnikrishnan G, Thomas S |
| 2703 - 2707 |
Photoplastic effect in polycarbonate using tensile deformation
Sharma S, Bajpai R, Chandra BP |
| 2708 - 2714 |
Effect of hydrophilicity on the biodegradability of polyesteramides
Park C, Kim EY, Yoo YT, Im SS |
| 2715 - 2720 |
Proton conducting materials based on thermoplastic elastomers silica composites
Acosta JL, Gonzalez L, Ojeda MC, del Rio C |
| 2721 - 2726 |
Synthesis, characterization, and thermal properties of copolymers of behenyl acrylate and behenyl fumarate
Sarmah D, Baruah SD |
| 2727 - 2733 |
Permeability of semicrystalline polymers to toluene/methanol mixture
Gagnard C, Germain Y, Keraudren P, Barriere B |
| 2734 - 2739 |
Wood flour: A new filler for the rubber processing industry. I. Cure characteristics and mechanical properties of wood flour-filled NBR and NBR/PVC compounds
Vladkova T, Vassileva S, Natov M |
| 2740 - 2751 |
The effect of fiber orientation on the toughening of short fiber-reinforced polymers
Norman DA, Robertson RE |
| 2752 - 2755 |
Affect of dope additives on finishing behavior of carbon fiber precursors
Hou C, Wang CG, Ying L, Cai HS |
| 2756 - 2763 |
A novel biodegradable antimicrobial PU foam from wattle tannin
Ge JJ, Shi XH, Cai MQ, Wu R, Wang M |
| 2764 - 2774 |
Comparison between the thermal and microwave curing of bismaleimide resin
Zainol I, Day R, Heatley F |
| 2775 - 2784 |
Thermal and mechanical characterization of linear low density polyethylene/wood flour composites
Marcovich NE, Villar MA |
| 2785 - 2793 |
Water-dispersible porous polyisoprene-block-poly(acrylic acid) microspheres
Lu ZH, Liu GJ, Liu FT |
| 2794 - 2800 |
Effect of plasticizers in poly(vinyl alcohol)-based hybrid solid polymer electrolytes
Rajendran S, Sivakumar M, Subadevi R |
| 2801 - 2812 |
Characterization and physical properties of polymethylphenylsilsesquioxane (PMPSQ) and hydroxyl-functionalized polystyrene (PS-OH) hybrids
Hong SP, Hong SM, Hwang SS, Kim BC |
| 2813 - 2823 |
Synthesis and characterization of iron carbonyl-modified hydroxyl-terminated polybutadiene: A catalyst-bound propellant binder for burn-rate augmentation
Subrarnanian K, Sastri KS |
| 2824 - 2833 |
Synthesis, properties, and dyeing application of nonionic waterborne polyurethanes with different chain length of ethyldiamines as the chain extender
Yen MS, Chen PY, Tsai HC |
| 2834 - 2839 |
Effect of the crosslinking degree on curing kinetics of an epoxy-acid copolymer system
Heba F, Mouzali M, Abadie MJM |
| 2840 - 2847 |
Preparation of a novel metal-chelate affinity beads for albumin isolation from human plasma
Odabasi M, Garipcan B, Denizli A |
| 2848 - 2854 |
Preparation and characterization of titanium oxide-densified cellulose beads for expanded bed adsorption
Lei YL, Lin DQ, Yao SJ, Zhu ZQ |
| 2855 - 2860 |
Study of radiation-induced graft copolymerization of butyl acrylate onto chitosan in acetic acid aqueous solution
Yu L, He Y, Bin L, Yue'e F |
| 2861 - 2869 |
Polymerization of 4-(4'-N-1,8-naphthalimidophenyl)-1,2,4-triazolidine-3,5-dione with diisocyanates
Mallakpour S, Rafiee Z |
| 2870 - 2877 |
Ripening time and fiber formation of chitosan spinning dope
Lee SH |
