| 2383 - 2393 |
Effect of yielding on the viscoelastic response of amorphous glassy polymers
Drozdov AD |
| 2394 - 2399 |
Study on the tribological characteristics of solid lubricants embedded tin-bronze bearings
Li TS, Tao J, Cong PH, Liu XJ |
| 2400 - 2415 |
Structure, processing, morphology, and property relationships of biaxially drawn Ziegler-Natta/metallocene isotactic polypropylene film
Phillips RA, Nguyen T |
| 2416 - 2421 |
Novel optically active poly(amide-imide)s with tetrahydropyrimidinone and tetrahydro-2-thioxopyrimidine moieties by microwave-assisted polycondensation
Mallakpour SE, Hajipour AR, Faghihi K, Foroughifar N, Bagheri J |
| 2422 - 2436 |
Transesterification reaction kinetics of poly(ethylene terephthalate/poly(ethylene 2,6-naphthalate) blends
Shi Y, Jabarin SA |
| 2437 - 2445 |
Rheological study of crosslinking and gelation in bismaleimide/cyanate ester interpenetrating polymer network
Hu X, Fan J, Yue CY |
| 2446 - 2454 |
Ring-opening polymerization of epichlorohydrin and its copolymerization with other alkylene oxides by quaternary catalyst system
Xie HQ, Guo JS, Yu GQ, Zu J |
| 2455 - 2459 |
Soapless emulsion polymerization of butyl methacrylate through microwave heating
He WD, Pan CY, Lu T |
| 2460 - 2467 |
Novel regenerable N-halamine polymeric biocides. I. Synthesis, characterization, and antibacterial activity of hydantoin-containing polymers
Sun YY, Sun G |
| 2468 - 2473 |
Effects of a hindered phenol compound on the dynamic mechanical properties of chlorinated polyethylene, acrylic rubber, and their blend
Wu CF |
| 2474 - 2482 |
Influence of some additives an state-of-mix, rheological, tensile, and dynamic mechanical properties in SBR compounds
Sirisinha C, Sittichokchuchai W |
| 2483 - 2494 |
Starlike Nylon 6/polyurethane block copolymers by reaction injection-molding process (RIM)
Gonzalez-de los Santos EA, Lopez-Rodriguez AS, Lozano-Gonzalez MJ, Soriano-Corral F |
| 2495 - 2501 |
Molecular weight effect on antimicrobial activity of chitosan treated cotton fabrics
Shin Y, Yoo DI, Jang J |
| 2502 - 2510 |
Effect of hard segment and concentration of NaClO4 on poly(ethylene oxide)-urethane/NaClO4 complex
Yang B, Zeng LX, Wang L, Tang XZ, Tian GH, Zhang B |
| 2511 - 2517 |
Structural, mechanical, and electrical properties of electropolymerized polypyrrole composite films
Bhat NV, Gadre AP, Bambole VA |
| 2518 - 2522 |
Modification of bismaleimide with allyl compound and N-phenylmaleimide
Ma XY, Yan HX, Ning RC |
| 2523 - 2534 |
Effects of composition and temperature on extrudate characteristics, morphology, and tensile properties of acrylic rubber-blended PVC
Wimolmala E, Wootthikanokkhan J, Sombatsompop N |
| 2535 - 2537 |
Crystallization and nematic-isotropic transition activation energies measured using the Kissinger method
Sha W |
| 2538 - 2544 |
Morphology, structure, and rheological property of linear low-density polyethylene grafted with acrylic acid
Huang HL, Yao ZH, Yang JH, Wang Y, Shi DA, Yin JH |
| 2545 - 2557 |
Tensile properties of elastomeric polyolefin thin films: The path to failure
Eckersley ST, Chaput AB |
| 2558 - 2565 |
Preparation and characterization of chitosan/poly(vinyl alcohol) blend fibers
Zheng H, Du YM, Yu JH, Huang RH, Zhang L |
| 2566 - 2572 |
Polymerization of methyl methacrylate with a thermal iniferter: Diethyl 2,3-dicyano-2,3-di(p-tolyl)succinate
Qin SH, Qiu KY, Westmoreland DG, Lau W, Wu S, Swift G |
| 2573 - 2577 |
Recycling of commingled plastics waste containing polypropylene, polyethylene, and paper
Mehrabzadeh M, Farahmand F |
| 2578 - 2582 |
Selective retention properties to silver(I) and mercury(II) ions of poly(4-vinylpyridine) methyl iodide studied by the liquid-phase polymer-based retention technique
Rivas BL, Pereira ED |
| 2583 - 2592 |
Effect of transesterification on the morphology and mechanical properties of a blend containing a liquid crystalline polymer
Radmard B, Dadmun MD |
| 2593 - 2599 |
Blends of acrylonitrile-butadiene-styrene/waste poly(ethylene terephthalate) compatibilized by styrene maleic anhydride
Paul S, Kale DD |
| 2600 - 2608 |
Miscibility of block copolymers of poly(epsilon-caprolactone) and poly(ethylene glycol) with poly(3-hydroxybutyrate) as well as the compatibilizing effect of these copolymers in blends of poly(epsilon-caprolactone) and poly(3-hydroxybutyrate)
Shuai X, He Y, Na YH, Inoue Y |
| 2609 - 2616 |
Physical properties of PP-g-AA prepared by melt extrusion and its effects on mechanical properties of PP
Mai KC, Li ZJ, Zeng HM |
| 2617 - 2623 |
Mechanical properties and fracture morphology of Al(OH)(3)/polypropylene composites modified by PP crafting with acrylic acid
Mai KC, Li ZJ, Qiu YX, Zeng HM |
| 2624 - 2632 |
Preparation and structural characterization of water-soluble O-hydroxypropyl chitin derivatives
Park IK, Park YH |
| 2633 - 2633 |
Anodic electrodeposition of asphalt-polystyrene emulsions on galvanized steel (vol 74, pg 1078, 1999)
Rojas V, Laverde D, Correa R |
