| 245 - 257 |
Effect of the addition mode of cycloaliphatic diepoxide on the morphology and film properties of crosslinkable core-shell latex
Teng GH, Soucek MD, Yang XFF, Tallman DE |
| 258 - 265 |
Improvement of adhesion between polyaniline and ion assisted-reaction-treated polypropylene
Lee CS, Han S, Beag YW, Joo JS, Koh SK |
| 266 - 277 |
Effect of styrene-isoprene-styrene, styrene-butadiene-styrene, and styrene-butadiene-rubber on the mechanical thermal, rheological, and morphological properties of polypropylene/polystyrene blends
Raghu P, Nere CK, Jagtap RN |
| 278 - 286 |
Surface of cellulosic materials modified with functionalized polyethylene coupling agents
Li QX, Matuana LM |
| 287 - 292 |
Low addition of melamine salts for improved melamine-urea-formaldehyde adhesive water resistance
Zanetti M, Pizzi A |
| 293 - 296 |
Preparation and solid-state nuclear magnetic resonance characterization a styrene/butadiene/acrylonitrile (ABS/poly(vinyl chloride) (PVC)/gypsum ternary system
da Silva EP, Kaplan MAC, Tavares MIB |
| 297 - 301 |
Effects of an organic phosphorus nucleating agent on crystallization behaviors and mechanical properties of poly(propylene)
Gui QD, Xin Z, Zhu WP, Dai G |
| 302 - 306 |
Structural characterization of oligomers from the polycondensation of citric acid with ethylene glycol and long-chain aliphatic alcohols
Barroso-Bujans F, Martinez R, Ortiz P |
| 307 - 311 |
Poly(phenylene oxide)-based polymer electrolyte membranes for fuel-cell applications
Ramya K, Dhathathreyan KS |
| 312 - 321 |
The characteristic properties of poly(methyl methacrylate)/polystyrene core-shell composite polymer latex
Lee CF |
| 322 - 326 |
Gelatin/montmorillonite hybrid nanocomposite. II. Swelling behavior
Li P, Zheng JP, Ma YL, De Yao K |
| 327 - 336 |
Kinetic study on the reaction of 2,4-and 2,6-tolylene diisocyanate with 1-butanol in the presence of styrene, as a model reaction for the process that yields interpenetrating polyurethane-polyester networks
Krol P, Wojturska J |
| 337 - 345 |
Novel cellulose ester-poly(furfuryl alcohol)-Flax fiber biocomposites
Toriz G, Arvidsson R, Westin M, Gatenholm P |
| 346 - 351 |
Polyelectrolye complex formation between alginate and chitosan as a function of pH
Simsek-Ege FA, Bond GM, Stringer J |
| 352 - 359 |
Complexation of uranyl ions by polypyrrole doped by sulfonated and phosphonated polyethyleneimine
Leroy D, Martinot L, Mignonsin P, Strivay D, Weber G, Jerome C, Jerome R |
| 360 - 368 |
Heterogeneous nucleation of nylon 6 and PET with selected inorganic compounds
Martinez-Vazquez DG, Medellin-Rodriguez FJ, Phillips PJ, Sanchez-Valdes S |
| 369 - 379 |
Synthesis of polyaniline using horseradish peroxidase immobilized on plasma-functionalized polyethylene surfaces as initiator
Alvarez S, Manolache S, Denes F |
| 380 - 388 |
Polyurethanes: Products of 4,4'-bis(6-hydroxyhexylthio)diphenyl ether and methylene bis(4-phenyl isocyante
Wdowicka D, Podkoscielny W, Rogulska M |
| 389 - 397 |
Deposition of poly(diphenylamine-co-o-chloroaniline) by pulse potentiostatic method: Growth equation and characterization
Rajendran V, Gopalan A, Buvaneswari R, Vasudevan T, Wen TC |
| 398 - 403 |
Studies on polyamide-6/polyolefin blend system compatibilized with epoxidized natural rubber
Xie BH, Yang MB, Li SD, Li ZM, Feng JM |
| 404 - 406 |
DVD substrate application for polycarbonate end-capped with 4-alpha-cumylphenol
Okamoto M |
| 407 - 413 |
Properties of soy protein isolate/poly(ethylene-co-ethyl acrylate-co-maleic anhydride) blends
Zhong ZK, Sun SX |
| 414 - 421 |
Removal of heavy metal ions using the chelating polymers derived by the condensation of poly(3-hydroxy-4-acetylphenyl methacrylate) with different diamines
Reddy KH, Reddy AR |
| 422 - 427 |
Ways of strengthening biodegradable soy-dreg plastics
Zhang L, Chen P, Huang J, Yang G, Zheng LS |
| 428 - 433 |
Preparation of micrometer-sized, monodisperse, magnetic polymer particles
Okubo M, Minami H, Komura T |
| 434 - 441 |
Comparative analysis of ultrasonically devulcanized unfilled SBR, NR, and EPDM rubbers
Yun J, Isayev AI, Kim SH, Tapale M |
| 442 - 451 |
Review on the development of defect-free and ultrathin-skinned asymmetric membranes for gas separation through manipulation of phase inversion and rheological factors
Ismail AF, Yean LP |
| 452 - 458 |
Analysis of the cure reaction of carbon nanotubes/epoxy resin composites through thermal analysis and Raman spectroscopy
Puglia D, Valentini L, Kenny JM |
| 459 - 465 |
Effect of film draw temperature (FDT) on physical properties of polyethylene
Basfar AA, Ali KML |
| 466 - 469 |
Ethylene polymerization with a silica-supported iron-based diimine catalyst
Ma Z, Ke YC, Wang H, Guo CY, Zhang MG, Sun WH, Hu YL |
| 470 - 475 |
Modification of aqueous acrylic-polyurethane via epoxy resin postcrosslinking
Shi YC, Wu YS, Zhu ZQ |
| 476 - 482 |
Iron(II)-based catalysts for ethene oligomerization
Schmidt R, Hammon U, Gottfried S, Welch MB, Alt HG |
| 483 - 488 |
Preparation of composite particles made from solid powders and wasted plastics by semichemical recycle method
Taguchi Y, Tanaka M |
| 489 - 493 |
Preparation and anticoagulant property of phosphorylcholine-terminated o-benzoylchitosan derivative
Zhu AP, Zhang J, Shen J |
| 494 - 499 |
Effect of concentration and absorbency of polyacrylate pH of solutions on the superabsorbents
Kang HM, Xie JJ |
| 500 - 509 |
Measurment and numerical simulation of three dimensional fiber orientation states in injection-molded short-fiber-reinforced plastics
Lee KS, Lee SW, Chung KS, Kang TJ, Youn JR |
| 510 - 515 |
Modeling of the transient viscosity for polymer melts after startup of shearing and elongational deformations
Seo Y |
| 516 - 521 |
Structural properties of CrF3- and MnCl2-filled poly(vinylalcohol) films
Zidan HM |
| 522 - 530 |
Surface modification of polybutadiene facilitated by supercritical carbon dioxide
Ngo TT, McCarney J, Brown JS, Lazzaroni MJ, Counts K, Liotta CL, Eckert CA |
| 531 - 535 |
Effects of dowels produced from various materials on withdrawal strength in MDF and Pb
Uysal B, Ozcifci A |
| 536 - 544 |
Effects of irradiation on the melting and crystallization behavior of ethylene polymers with different thermal history
Teng HX, Dong WF, Shi Y, Jin XG |
| 545 - 549 |
Estimating crystallinity in high density polyethylene fibers using online Raman spectroscopy
Paradkar RP, Sakhalkar SS, He X, Ellison MS |
| 550 - 564 |
Effect of stress state and polymer morphology on environmental stress cracking in polycarbonate
Raman A, Farris RJ, Lesser AJ |
| 565 - 569 |
Polymerization behavior of an organophosphorus monomer for use in dental restorative materials
Adusei G, Deb S, Nicholson JW, Mou LY, Singh G |
| 570 - 581 |
Synthesis, characterization, and metal ion uptake studies of chelating resins derived from formaldehyde/furfuraldehyde condensed phenolic Schiff base of 4,4'-diaminodiphenylmethane and o-hydroxyacetophenone
Samal S, Acharya S, Dey RK, Ray AR |
| 582 - 588 |
Modification of phenol-formaldehyde resol resins by lignin, starch, and urea
Turunen M, Alvila L, Pakkanen TT, Rainio J |
| 589 - 594 |
Spectroscopic behavior of poly(vinyl alcohol) films with different molecular weights after UV irradiation, thermal annealing, and double treatment with UV irradiation and thermal annealing
El-Kader KMA |
