| 2015 - 2025 |
DSC study of transitions involved in thermal treatment of foamable mixtures of PE and EVA copolymer with azodicarbonamide
Reyes-Labarta JA, Olaya MM, Marcilla A |
| 2026 - 2033 |
Nonisothermal crystallization behavior of glass-bead-filled polypropylene
Yuan Q, Jiang W, An LJ, Misra RDK |
| 2034 - 2042 |
Transport properties of trogamid: Comparison of different experimental techniques
Etxeberria A, Garcia A, Iriarte M, Iruin JJ, Uriarte C |
| 2043 - 2054 |
Nonequilibrium morphology development in seeded emulsion polymerization. V. The effect of crosslinking agent
Stubbs JM, Sundberg DC |
| 2055 - 2061 |
Release of dithiocarbamates into artificial sweat from latex vulcanizates: Effects of the accelerator type and storage time
Abraham EK, Ramesh P, Joseph R |
| 2062 - 2066 |
Melt-compounded butadiene rubber nanocomposites with improved mechanical properties and abrasion resistance
Kim MS, Kim DW, Chowdhury SR, Kim GH |
| 2067 - 2080 |
Melting and crystallization behaviors of isotactic polypropylene/acrylonitrile-butadiene rubber blends in the presence and absence of compatibilizers and fillers
Joseph A, George S, Joseph K, Thomas S |
| 2081 - 2085 |
Atom transfer radical polymerization of styrene with 2-(1-bromoethyl)-anthraquinone as an initiator
Zhao K, Zhu XL, Cheng ZP, Wang G, Zhu J |
| 2086 - 2093 |
Curing of mixtures of epoxy resins and 4-methyl-1,3-dioxolan-2-one with several initiators
Cervellera R, Ramis X, Salla JM, Mantecon A, Serra A |
| 2094 - 2098 |
Poly(methyl methacrylate) as for microelectromechanical masking material system (MEMS) fabrication
Bodas DS, Gangal SA |
| 2099 - 2106 |
Properties of polyurethane coatings containing additives of phenolic compounds
Yokoyama N |
| 2107 - 2111 |
Polyaniline/Fe3O4 magnetic nanocomposite prepared by ultrasonic irradiation
Qiu GH, Wang Q, Nie M |
| 2112 - 2116 |
Redox initiation system of ceric salt and alpha,omega-dihydroxy poly(dimethylsiloxane)s for vinyl polymerization
Oz N, Akar A |
| 2117 - 2124 |
Polypropylene-nanosilica-filled composites: Effects of epoxy-resin-grafted nanosilica on the structural, thermal, and dynamic mechanical properties
Reddy CS, Das CK |
| 2125 - 2131 |
Spectroscopic, thermal, and electrical investigations of PVDF films filled with BiCl3
Hakeem NA, Abdelkader HI, El-Sheshtawi NA, Eleshmawi IS |
| 2132 - 2141 |
Experimental and theoretical approaches to investigating the miscibility of anhydride-containing copolymers and dextran
Can HK, Barsbay M, Guner A, Rzaev ZMO |
| 2142 - 2148 |
Use of nylon 6/polyethylene blends in the preparation of textile yarns
de Rezende CA, Schuchardt UF, Goncalves MD |
| 2149 - 2157 |
Impact of melt impregnation on the color of wood-plastic composites
Zhang YL, Zhang SY, Chui YH |
| 2158 - 2163 |
Inhibitive properties of cationic polymers in a borehole environment
Souza CEC, Fonseca MV, Sa CH, Nascimento RSV |
| 2164 - 2174 |
High-performance filaments from compatibilized polypropylene/clay nanocomposites
Joshi M, Viswanathan V |
| 2175 - 2179 |
Modification of polyacrylonitrile precursors for carbon fiber via copolymerization of acrylonitrile with ammonium itaconate
Liu JJ, Ge HY, Wang CG |
| 2180 - 2188 |
A high-performance positive-working photosensitive polyimide: Effects of reactive end groups on the physical properties of the films
Jung MS, Joo WJ, Kwon O, Sohn BH, Jung HT |
| 2189 - 2198 |
Dynamic sorption and transport of water vapor in dense polyimide membranes
Zeng CY, Li JD, Chen TQ, Chen J, Chen CX |
| 2199 - 2202 |
Effect of the medium on the stereostructure of poly(methyl methacrylate) synthesized in ionic liquids
Li D, Zhang YM, Wang HP, Tang JZ, Wang B |
| 2203 - 2211 |
Preparation and characterization of a high molecular weight UV-stabilizer based on a derivative of 2,4-dihydroxybenzophenone and its application in polymer materials
Yi Z, Yi D |
| 2212 - 2217 |
Rheological behavior and microstructure of bimodal suspensions of core-shell structured swollen particles
Nakamura H, Tachi K |
| 2218 - 2225 |
Preparation of silvered polyimide films with reflective and electrically conductive surfaces using single-stage self-metallization techniques and factors affecting silver particles migration
Wu ZP, Wu DZ, Zhang T, Jiang LZ, Wang WC, Jin RG |
| 2226 - 2232 |
Preparation and evaluation of floating-bioadhesive microparticles containing clarithromycin for the eradication of Helicobacter pylori
Zheng JH, Liu CW, Bao DC, Zhao YJ, Ma XJ |
| 2233 - 2240 |
Vinyl polymerization of norbornene over supported nickel catalyst
Hou JX, Jie SY, Zhang WJ, Sun WH |
| 2241 - 2248 |
Molecular orientation of extruded PET/LCP blend films. Part I: Polarized infrared spectroscopy
Branciforti MC, Silva LB, Bretas RES |
| 2249 - 2253 |
Heat transfer in injection molding of crystalline plastics
Bai Y, Yin B, Fu XR, Yang MG |
| 2254 - 2263 |
Surface functionalization of polyolefin films via the ultraviolet-induced photografting of acrylic acid: Topographical characterization and ability for binding antifungal agents
Costamagna V, Wunderlin D, Larranaga M, Mondragon I, Strumia M |
| 2264 - 2275 |
Thermally bonded nonwoven filters composed of bi-component polypropylene/polyester fiber. II. Relationships between fabric area density, air permeability, and pore size distribution
Wang XY, Gong RH |
| 2276 - 2284 |
Properties of calcium carbonate filled and unfilled polystyrene foams prepared using Supercritical carbon dioxide
Chiu FC, Lai SM, Wong CM, Chang CH |
| 2285 - 2292 |
Synthesis of wood-based epoxy resins and their mechanical and adhesive properties
Kishi H, Fujita A, Miyazaki H, Matsuda S, Murakami A |
| 2293 - 2298 |
Comparison of catalytic behaviors of various silica-supported metallocene catalysts in syndiospecific polymerization of styrene
Yim JH, Ihm SK |
| 2299 - 2307 |
Phase morphology control of immiscible polymer blends under vibration force field
Du YX, Qu JP |
| 2308 - 2314 |
Microstructures and optical features of polymer-immobilized non close-packed colloidal crystalline array
Nakamura H, Mitsuoka T, Ishii M |
| 2315 - 2323 |
Preparation and characterization of PVA/OMMT composites
Yurudu C, Isci S, Unlu C, Atici O, Ece OI, Gungor N |
| 2324 - 2337 |
Synthesis of dendrimer-type poly(ethylene glycol) structures from plasma-functionalized silicone rubber surfaces
Jiang H, Manolache S, Wong AC, Denes FS |
| 2338 - 2342 |
Properties of ligno-cellulosic bilayered vegetable fabric from ridge gourd
Rajulu AV, Nadhan AV, Devi RR |
| 2343 - 2351 |
Gas permeability analysis of photo-cured cyclohexyl-substituted polysiloxane films
Dworak DP, Lin H, Freeman BD, Soucek MD |
| 2352 - 2361 |
Characterization and electrical properties of methyl-2-hydroxyethyl cellulose doped with erbium nitrate salt
Abd-El Kader FH, Said G, El-Naggar MM, Anees BA |
| 2362 - 2371 |
Insert-molded poly(ether imide)/carbon fiber poly(ether ether ketone) bimaterial composites: Fracture and interfacial analysis
Moon SI, Monson LL, Extrand CW |
| 2372 - 2378 |
Preparation and modification of macroporous epoxy-triethylenetetramine resin for preconcentration and removal of Hg(II) in aqueous solution
Pan JY, Wang S, Zhang RF |
| 2379 - 2385 |
Dispersion polymerization of acrylamide with 2-acrylamido-2-methyl-1-propane sulfonate in aqueous solution
Wu YM, Wang YP, Yu YQ, Xu J, Chen QF |
| 2386 - 2390 |
Swift heavy ion irradiated polymeric membranes for gas permeation
Kulshrestha V, Awasthi K, Acharya NK, Singh M, Avasthi DK, Vijay YK |
| 2391 - 2400 |
A synergistic effect of nano-TiO2 and graphite on the tribological performance of epoxy matrix composites
Xian GJ, Walter R, Haupert F |
| 2401 - 2407 |
Smart anionic polyelectrolytes based on natural polymer for complexation of cationic surfactant
Szczubialka K, Rosol K, Nowakowska M |
| 2408 - 2415 |
Synergistic efficiency of combined HALS-UV absorber polymerizable stabilizers
Bojinov V |
| 2416 - 2425 |
Characterization of conducting poly(3-methylthiophene) films prepared under sono-electrochemical conditions
Galal A |
| 2426 - 2432 |
Determination of thermodynamic and transport properties of solvents and non solvents in poly(L-lactide-co-glycolide)
Eser H, Tihminlioglu F |
| 2433 - 2447 |
Soybean and castor oil based monomers: Synthesis and copolymerization with styrene
Can E, Wool RP, Kusefoglu S |
| 2448 - 2453 |
Effects of ammonium dibasic phosphate pretreatment time on the structure and properties of PAN-based activated carbon hollow fibers
Sun JF, He CJ, Zhu SJ, Wang QR |
| 2454 - 2462 |
Adsorption characteristics of benzene on electrospun-derived porous carbon nanofibers
Shim WG, Kim C, Lee JW, Yun JJ, Jeong YI, Moon H, Yang KS |
| 2463 - 2469 |
Free-volume hole properties of two kinds thermoplastic nanocomposites based on polymer blends probed by positron annihilation lifetime spectroscopy
Fang ZP, Xu YZ, Tong LF |
| 2470 - 2480 |
Structure and characterization for conterminously linked polymer of short-chain epoxy resin with triallyl isocyanurate and bismaleimide
Leu TS |
| 2481 - 2487 |
Influence of copolymerization conditions on the structure and properties of polyethylene/polypropylene/poly(ethylene-co-propylene) in-reactor alloys synthesized in gas-phase with spherical ziegler-natta catalyst
Fan ZQ, Deng J, Zuo YM, Fu ZS |
| 2488 - 2492 |
Novel heat resistant methyl-tri(phenylethynyl)silane resin: Synthesis, characterization and thermal properties
Zhou Q, Feng X, Ni LZ, Chen JD |
| 2493 - 2499 |
Non-isothermal crystallization kinetics and melting behaviors of poly(butylene succinate) and its copolyester modified with trimellitic imide units
Liu XQ, Li CC, Xiao YN, Zhang D, Zeng W |
| 2500 - 2508 |
Prevaration of multiwall carbon nanotubes/poly(p-phenylene benzobisoxazole) nanocomposites and analysis of their physical properties
Li X, Huang YD, Liu L, Cao HL |
| 2509 - 2511 |
Efficient light emitting diodes from ternary blends of PPV-based copolymers
Cirpan A, Aroguz ZA, Karasz FE |
| 2512 - 2519 |
Blends containing amphiphilic polymers. V. Compatibilization of N-alkylitaconamic acid-co-styrene copolymers with interacting polymers
Urzua M, Sandoval C, Gonzalez-Nilo F, Leiva A, Gargallo L, Radic D |
| 2520 - 2526 |
Effect of composite preparation techniques on electrical and mechanical properties and morphology of nylon 6 based conductive polymer composites
Koysuren O, Yesil S, Bayram G |
| 2527 - 2536 |
Crystallization kinetics of novel poly(aryl ether ketone) copolymers containing 2,7-naphthalene moieties
Liu SJ, Sun XB, Hou X, Wang GB, Jiang ZH |
| 2537 - 2543 |
Technological and processing properties of natural rubber layered silicate-nanocomposites by melt intercalation process
Madhusoodanan KN, Varghese S |
| 2544 - 2551 |
Influence of fiber Wettability on the interfacial adhesion of continuous fiber-reinforced PPESK composite
Chen P, Lu C, Yu Q, Gao Y, Li JF, Li XL |
| 2552 - 2559 |
Kinetic investigation of ZrO2, Y2O3, and Ni on poly(vinyl butyral) thermal degradation using nonlinear heating functions
Liau LCK, Chien YC |
| 2560 - 2567 |
Toughening and reinforcement of rigid PVC with silicone rubber/nano-CaCO3 shell-core structured fillers
Yang L, Hu Y, Guo H, Song L, Chen ZY, Fan WC |
| 2568 - 2577 |
Synthesis and characterization of biodegradable and charged salen-based polymers
Nadeau V, Rabanel JM, Sant S, Chahwan R, Clas SD, Hildgen P |
| 2578 - 2583 |
Aggregate formation in poly(ethylene oxide) solutions
Khan MS |
| 2584 - 2589 |
Investigation of crystallization of PVCH-PE-PVCH triblock copolymer in supercritical carbon dioxide
Yu PQ, Xie XM, Wang T, Bates FS |
| 2590 - 2599 |
Covalently tethered comb-like polymer brushes on hydrogen-terminated Si (100) surface via consecutive aqueous atom transfer radical polymerization of methacrylates
Zhai GQ, Cao Y, Gao J |
| 2600 - 2607 |
Isotactic polypropylene hollow microfibers prepared by CO2 laser-thinning
Suzuki A, Ohnishi H |
| 2608 - 2615 |
Investigation of correlations between mucoadhesion and surface energy properties of mucoadhesives
Xiang J, Li XL |
| 2616 - 2622 |
Optimization of the preparation of a poly(aspartic acid) superabsorbent resin with response surface methodology
Zhao Y, Fang L, Tan TW |
| 2623 - 2631 |
Polymerization of resole resins with several formaldehye/phenol molar ratios: Amine catalysts against catalysts
Gabilondo N, Larranaga M, Pena C, Corcuera MA, Echeverria JM, Mondragon I |
| 2632 - 2638 |
Synthesis of polystyrene-b-poly(ethylene-co-butene) block copolymers by anionic living polymerization and subsequent noncatalytic hydrogenation
Liang GD, Xu JT, Fan ZQ |
| 2639 - 2642 |
Nanocomposite alkyd coatings
Jiratumnukul N, Pruthipaitoon S, Pitsaroup T |
| 2643 - 2653 |
Ultrasonic treatment of polypropylene, polyamide 6, and their blends
Lin H, Isayev AI |
| 2654 - 2660 |
Synthesis and characterization of poly(epsilon-caprolactone)-poly(L-lactide) diblock copolymers with an organic amino calcium catalyst
Piao LH, Sun JR, Zhong ZY, Liang QZ, Chen XS, Kim JH, Jing XB |
| 2661 - 2667 |
Effects of modified poly(methacrylic acid) copolymer on rheological properties of ceramic suspension and sintered ceramic strength
Wang HH, Shen YD, Fei GQ, Li GH, Zhang YP |
| 2668 - 2676 |
Water vapor adsorption and volumetric swelling of melt-impregnated wood-polymer composites
Zhang YL, Zhang SY, Chui YH |
| 2677 - 2684 |
Retention properties of arsenate anions of water-soluble polymers by a liquid-phase polymer-based retention technique
Rivas BL, Aguirre MD, Pereira E |
| 2685 - 2691 |
Preparation and properties of a new coating method for preparing conductive polyester fibers with permanent conductivity
Jin X, Xiao CF, An SL, Wang YT, Jia GX |
| 2692 - 2699 |
Low temperature solid-state extrusion of recycled poly(ethylene terephthalate) bottle scraps
Guo WH, Tang XW, Yin GR, Gao YJ, Wu CF |
| 2700 - 2707 |
Viscoelasticity and morphology of poly (ethylene-co-vinyl acetate)/polyisobutylene blends
Shumsky VF, Lipatov Y, Getmanchuk I, Usenko A, Cassagnau P, Boiteux G, Melis F, Lucas JM |
| 2708 - 2716 |
Reflective and electrically conductive palladium surface-metallized polyimide nanocomposite membranes
Davis LM, Compton JM, Kranbuehl DE, Thompson DW, Southward RE |
| 2717 - 2724 |
Interpolymer interactions and miscibility in poly(n-butyl methacrylate-co-methacrylic acid)/poly(styrene-co-N,N-dimethyl acrylamide) blends
Hadj-Hamou AS, Djadoun S |
| 2725 - 2729 |
Synthesis of poly(epichlorohydrin-g-methyl methacrylate) graft copolymers by the combination of cationic and atom transfer radical polymerization
Cakmak I, Baykara H |
| 2730 - 2737 |
Cardanol-based novolac-type phenolic resins. I. A kinetic approach
Devi A, Srivastava D |
| 2738 - 2742 |
Miscibility studies on chitosan/hydroxypropylmethyl cellulose blend in solution by viscosity, ultrasonic velocity, density, and refractive index methods
Jayaraju J, Raviprakash SD, Keshavayya J, Rai SK |
| 2743 - 2751 |
Orientation of montmorillonite clay in dicyclopentadiene/organically modified clay dispersions and nanocomposites
Yoonessi M, Toghiani H, Pittman CU |
| 2752 - 2759 |
Depolymerization of clean unfilled PTFE waste in a continuous process
Van der Walt IJ, Bruinsma OSL |
| 2760 - 2767 |
Correlations between processing parameters, morphology, and properties of blown films of LLDPE/LDPE blends, part 2: Crystalline and amorphous biaxial orientation by WAXD pole figures
Branciforti MC, Guerrini LM, Machado R, Bretas RES |
| 2768 - 2776 |
Poly(amides) and poly(imides) containing silicon and germanium in the main chain: Synthesis, characterization and thermal studies
Tagle LH, Terraza CA, Leiva A, Valenzuela P |
| 2777 - 2783 |
Numerical simulation of localized cure of thermosensitive resin during thermo stereolithography process (TSTL)
Andrade SR, Jardini AL, Maciel MRW, Maciel R |
| 2784 - 2794 |
Diffusion of seawater in unsaturated polyester resin and its glass fiber reinforced composites in the presence of titanium dioxide as UV absorber
Urs MVD, Ranganathaiah C, Ramani R, Lal B, Alam S |
| 2795 - 2798 |
Separation of ethylbenzene from C7(+)-cut naphtha
Faridi-Majidi R, Sharifi-Sanjani N, Khani RZE, Barari M |
| 2799 - 2809 |
Optimal policies for BMA polymerization in nonisothermal batch reactor
Sundaram BS, Upreti SR, Lohi A |
| 2810 - 2817 |
Application of magnetic resonance techniques in investigation of hydrocarbons interaction with composite polymers
Maddinelli G, Montanari L, Ferrando A, Maestrini C |
| 2818 - 2831 |
A new macroinitiator for the synthesis of triblock copolymers PA12-b-MMS-b-PA12
Rached R, Hoppe S, Jonquieres A, Lochon P, Pla F |
| 2832 - 2838 |
Compatibility of PTET-60/CA blends and separation performance of their membranes for benzene/cyclohexane mixture by pervaporation
Bai YX, Qian JW, Zhao Q, Xu Y, Ye SR |
| 2839 - 2846 |
PSA performances and viscoelastic properties of SIS-based PSA blends with H-DCPD tackifiers
Lim DH, Do HS, Kim HJ |
| 2847 - 2855 |
Crystallization kinetics for simulation of processing of various polyesters
Kim KH, Isayev AI, Kwon K |
| 2856 - 2862 |
Incorporation of metallic POSS, POSS copolymers, and new functionalized POSS compounds into commercial dental resins
Wheeler PA, Fu BX, Lichtenhan JD, Jia WT, Mathias LJ |
| 2863 - 2867 |
Preparation of molecularly imprinted polymers in supercritical carbon dioxide
Ye L, Yoshimatsu K, Kolodziej D, Francisco JD, Dey ES |
| 2868 - 2874 |
Highly wettable polyethylene films generated by spontaneous surface enrichment of perfluoroalkylated phosphorylcholines
Iwasaki Y, Akiyoshi K |
| 2875 - 2881 |
Preparation of a kaolinite-poly(acrylic acid acrylamide) water superabsorbent by photopolymerization
Wan T, Wang XQ, Yuan Y, He WQ |
| 2882 - 2888 |
Ultraviolet preirradiation of high-density polyethylene for the grafting of maleic anhydride during reactive extrusion
Martinez JG, Benavides R, Guerrero C |
| 2889 - 2893 |
Effects of the electrospray ionization parameters on the formation and morphology of colloidal microspheres of polyacrylonitrile
Hao XF, Lu XF, Li ZY, Zhao YY, Shang TC, Yang QB, Wang C, Li LJ |
| 2894 - 2903 |
Effect of different preparation routes on the structure and properties of rigid polyurethane-layered silicate nanocomposites
Woo T, Halley P, Martin D, Kim DS |
| 2904 - 2914 |
Epoxy resin modified with soybean oil containing cyclic carbonate groups
Porzuchowski PG, Jurczyk-Kowalska M, Ryszkowska J, Rokicki G |
| 2915 - 2928 |
Synthesis and characterization of cassava starch graft poly(acrylic acid) and poly[acrylic acid)-co-acrylamide] and polymer flocculants for wastewater treatment
Jiraprasertkul W, Nuisin R, Jinsart W, Kiatkamjornwong S |
| 2929 - 2934 |
Synthesis of conducting water-soluble polyaniline with iron(III) porphyrin
Nabid MR, Sedghi R, Jamaat PR, Safari N, Entezami AA |
| 2935 - 2945 |
Flame retardancy and nondripping properties of ammonium polyphosphate/poly(butylene succinate) composites enhanced by water crosslinking
Kuan CF, Kuan HC, Ma CCM, Chen CH |
| 2946 - 2952 |
Preparation of phenol-urea-formaldehyde copolymer adhesives under heterogeneous catalysis
Schmidt K, Grunwald D, Pasch H |
| 2953 - 2958 |
Polyolefins containing 1,3-disubstituted cyclopentane units as nucleating agents for isotactic polypropylene
Naga N, Kitaura K, Toyota A |
| 2959 - 2966 |
Porous polyphenylene sulfide membrane with high durability against solvents by the thermally induced phase-separation method
Ding HY, Zeng YM, Meng XF, Tian Y, Shi YQ, Jia QZ, Zhang SM |
| 2967 - 2971 |
Poly(dimethylaminoethylmethacryloylpropanesulfonate)-suitable polymer additive for pulsed electrodeposition of nanocrystalline nickel
Georgiev G, Kamenova I, Georgieva V, Kamenska E, Hempelmann R, Natter H |
| 2972 - 2979 |
Preparation of (S)-ibuprofen-imprinted polymer and its molecular recognition study
Hung CY, Huang YT, Huang HH, Hwang CC |
| 2980 - 2989 |
Nanocomposites from fluoro-oxygenated polyethylene: A novel route to organoclay exfoliation
Shah RK, Cui LL, Williams KL, Bauman B, Paul DR |
| 2990 - 2997 |
Effect of ultrasonic oscillations on weld line strength of PS, PMMA, and their blends
Yu XF, Lu C, Wu H, Guo SY |
| 2998 - 3007 |
Dependence of solids conveying on screw axial vibration in single screw extruders
Qu JP, Shi BS, Feng YH, He HZ |
| 3008 - 3016 |
Phase transitions of kappa-Carrageenan gels in various types of salts
Kara S, Arda E, Kavzak B, Pekcan O |
| 3017 - 3027 |
Graft polymerization of vinyl acetate onto granular starch: Comparison on the potassium persulfate and ceric ammonium nitrate initiated system
Lai SM, Don TM, Liu YH, Chiu WY |
| 3028 - 3036 |
Grafting of acrylic acid onto flax fibers using Mn(IV)-citric acid redox system
Zahran MK, Rehan MF |
| 3037 - 3047 |
Stress-strain behavior in uniaxial compression of polymer gel beads
Egholm RD, Christensen SF, Szabo P |
| 3048 - 3055 |
Synthesis and characterization of in situ polymerized segmented thermoplastic elastomeric polyurethane/layered silicate clay nanocomposites
Choi MY, Anandhan S, Youk JH, Baik DH, Seo SW, Lee HS |
| 3056 - 3061 |
Effects of the shear flow on a homogeneous polymeric reaction
Xie F, Zhou CX, Yu W |
| 3062 - 3068 |
Silicon-containing heterocyclic polymers and thin films made therefrom
Hamciuc C, Hamciuc E, Pakula T, Okrasa L |
| 3069 - 3077 |
Morphology of gas-assisted and conventional injection molded polycarbonate/polyethylene blend
Zheng GQ, Yang W, Yin B, Yang MB, Liu CT, Shen CY |
| 3078 - 3082 |
Spinning the supercooled PET to obtain highly oriented and crystallized PET fibers at low speeds
Cao JN |
