| 1439 - 1447 |
Graft polymerization synthesis and application of magnetic Fe3O4/polyacrylic acid composite nanoparticles
Hong RY, Pan TT, Han YP, Zhang SZ, Li HZ, Ding J |
| 1448 - 1455 |
Rheological and curing behavior of aqueous ambient self-crosslinkable polyacirylate emulsion
Liu XH, Zhang CZ, Xiong T, Chen DB, Zhong AY |
| 1456 - 1461 |
Crystal form and orientation of isotactic polypropylene samples prepared by vibration-injection molding
Zhang J, Zeng T, Zhu J, Lei YW, Shen KZ, Fu Q |
| 1462 - 1469 |
In situ cyclization reactions during the preparation of high-performance methacrylic acid/acrylonitrile/acrylamide ternary copolymer foam
Liu TM, Zhang GC, Liang GZ, Chen T, Zhang C |
| 1470 - 1475 |
Preparation and characterization of polyacrylamide cryogels produced from a high-molecular-weight precursor. I. influence of the reaction temperature and concentration of the crosslinking agent
Ivanov RV, Lozinsky VI, Noh SK, Han SS, Lyoo WS |
| 1476 - 1481 |
Preparation, curing kinetics, and thermal properties of bisphenol fluorene epoxy resin
Dai Z, Li YF, Yang SG, Zong CZ, Lu XK, Xu J |
| 1482 - 1495 |
Preparation and characterization of poly(vinylidene fluoride) hollow fiber membranes for vacuum membrane distillation
Wu B, Li K, Te WK |
| 1496 - 1506 |
Synthesis and characterization of dual-functionalized laponite clay for acrylic nanocomposites
Wang JZ, Wheeler PA, Jarrett WL, Mathias LJ |
| 1507 - 1517 |
Measuring the relative interface thickness of multilayer polyolefin films with atomic force microscopy
Paradkarl RP, Li J, Bar G, Pham H, Bosnyak C, Weinhold J |
| 1518 - 1525 |
Protein-transition metal ion networks
Barone JR, Dangaran KI, Schmidt WF |
| 1526 - 1534 |
Physical, chemical, and dyeing properties of bombyx mori silks grafted by 2-hydroxyethyl methacrylate and methyl methacrylate
Prachayawarakorn J, Boonsawat K |
| 1535 - 1543 |
Nonisothermal crystallization kinetics of flame-sprayed polyamide 1010/nano-ZrO2 composite coatings
Li YD, Ma YZ, Yan FF, Ca SK |
| 1544 - 1549 |
Hydrolytic and thermal degradation of PET fibers and PET granule: The effects of crystallization, temperature, and humidity
Pirzadeh E, Zadhoush A, Haghighat M |
| 1550 - 1556 |
Dispersion of nanoscale BaTiO3 suspensions by a combination of chemical and mechanical grinding/mixing processes
Ying KL, Hsieh TE |
| 1557 - 1567 |
Isothermal crystallization kinetics and melting behaviors of nanocomposites of poly(trimethylene terephthalate) filled with Nano-CaCO3
Run MT, Yao CG, Wang YJ, Gao JG |
| 1568 - 1575 |
Electrochemical deposition of polycarbazole thin films onto tin oxide coated glass: Physicochemical and optoelectronic characterizations
Abe SY, Bernede JC, Ugalde L, Tregouet Y, Del Valle MA |
| 1576 - 1584 |
Properties and behavior of CTBN-modified epoxy with IPN structure
Hsu YG, Liang CW |
| 1585 - 1594 |
Matrimid polyimide membranes for the separation of carbon dioxide from methane
Sridhar S, Veerapur RS, Patil MB, Gudasi KB, Aminabhavi TM |
| 1595 - 1600 |
Retention volumes of organic substances on ester phases
Bazylyak LI, Rohovyk VI, Makitra RG, Palchykova EA, Zaikov GE |
| 1601 - 1605 |
Properties of bentonite and local anesthetics composition
Zhumagalieva SN, Kudaibergenova BM, Beisebekov MK, Abilov ZA |
| 1606 - 1613 |
Absorbency and adsorption poly(acrylic acid-co-acrylamide) hydrogel
Xie JJ, Liu XR, Liang JF |
| 1614 - 1621 |
Optimization of dyeing of wool with madder and liposomes by central composite design
Montazer M, TaghaVi FA, Toliyat T, MoghadaM MB |
| 1622 - 1625 |
Determination of the polymer-solvent contact angle by the capillary raising curve, applied to the field of supports for homogeneous catalysts
Suman M |
| 1626 - 1631 |
Radical scavenging capacity of lignin and its effect on processing stabilization of virgin and recycled polypropylene
Gregorova A, Kosikova B, Stasko A |
| 1632 - 1639 |
Synthesis of a soluble azomethine-containing bisphenol and the properties of its modified epoxy thermosets
Zhang XH, Chen S, Chen T, Sun XK, Liu F, Qi G |
| 1640 - 1647 |
Unexpected fluorescence emission of poly(alpha,beta-L-malic acid) in aqueous medium
Fan YF, Fan YG, Wang YN, Ma JB |
| 1648 - 1658 |
Dye-fiber interactions in PET fibers: Hydrogen bonding studied by IR-spectroscopy
De Clerck K, Rahier H, Van Mele B, Westbroek P, Kiekens P |
| 1659 - 1669 |
Characterization of PET nanocomposites produced by different melt-based production methods
Todorov LV, Viana JC |
| 1670 - 1676 |
Surface dyeability of cotton and nylon fabrics coated with a novel porous silk fibroin/silica nanohybrid
Li WB, Zou LG, Zhou XP, Zhang BH, Wang XQ, Chen DJ |
| 1677 - 1682 |
Evaluation of swelling capacity of poly(vinyl alcohol) fibrous mats dealt with polyoxometalate containing vanadium
Yin R, Guan XH, Gong J, Qu LY |
| 1683 - 1688 |
Fluorinated polyether additives to improve the performance of urea-formaldehyde adhesives for wood panels
Mansouri HR, Thomas RR, Garnier S, Pizzi A |
| 1689 - 1696 |
Poly(lactic acid)/polystyrene bioblends characterized by thermogravimetric analysis, differential scanning calorimetry, and photoacoustic infrared spectroscopy
Mohamed A, Gordon SH, Biresaw G |
| 1697 - 1706 |
Chemical modification of oil palm empty fruit bunch: Determination of optimum condition and characterization
Tay GS, Rozman HD |
| 1707 - 1717 |
Polypropylene fibers containing dispersed clays having improved fire performance. I. Effect of nanoclays on processing parameters and fiber properties
Horrocks AR, Kandola BK, Smart G, Zhang S, Hull TR |
| 1718 - 1724 |
Thermoforming process of amorphous polymeric sheets: Modeling and finite element simulations
Makradi A, Belouettar S, Ahzi S, Puissant S |
| 1725 - 1732 |
Effects of ultrasonic oscillations on rheological behavior and mechanical properties of novel propylene-based plastomers
Peng B, Wu H, Guo SY, Lai SY, Jow J |
| 1733 - 1741 |
Interfacial adhesion of plasma-treated carbon fiber/poly(phthalazinone ether sulfone ketone) composite
Lu C, Chen P, Yu Q, Ding ZF, Lin ZW, Li W |
| 1742 - 1750 |
The synthesis of poly(3-hydroxybutyrate)-g-poly(methylmethacrylate) brush type graft copolymers by atom transfer radical polymerization method
Arslan H, Yesilyurt N, Hazer B |
| 1751 - 1756 |
Fiber breakage and dispersion in carbon-fiber-reinforced nylon 6/Clay nanocomposites
Zhou H, Qian ZZ, Meng XF, Ding YF, Zhang SM, Yang MS |
| 1757 - 1767 |
New functional bicomponent fibers with core/sheath-configuration using poly(phenylene sulfide) and poly(ethylene terephthalate)
Houis S, Schmid M, Lubben J |
| 1768 - 1776 |
Birefringence and orientation parameters of cold-drawn viscose fibers
Fouda IM, Seisa EA |
| 1777 - 1786 |
Synthesis and characterization of biodegradable aliphatic copolyesters with poly(tetramethylene oxide) soft segments
Pepic D, Nikolic MS, Djonlagic J |
| 1787 - 1792 |
High-temperature DSC study of polyacrylonitrile precursors during their conversion to carbon fibers
Wang YX, Wang CG, Wu JW, Jing M |
| 1793 - 1799 |
Structure formation and characterization of PVDF hollow fiber membranes by melt-spinning and stretching method
Du CH, Xu YY, Zhu BK |
| 1800 - 1805 |
Competitive removal of nickel (II), cobalt (II), and zinc (II) ions from aqueous solutions by starch-graft-acrylic acid copolymers
Guclu G, Guclu K, Keles S |
| 1806 - 1812 |
Effects of acidity and hydrolysis on the UV and fluorescence spectra of poly(2-acetylamino-1, 4-phenylene) and its hydrolyzed derivatives in acidic solutions
Huang WY, Huang PT, Chang MY, Liaw BR, Han YK |
| 1813 - 1820 |
Increased impact strength of biodegradable poly(lactic acid)/poly(butylene succinate) blend composites by using isocyanate as a reactive processing agent
Harada M, Ohya T, Iida K, Hayashi H, Hirano K, Fukudal H |
| 1821 - 1827 |
Synthesis and characterization of cross-linkable poly(phthalazinone ether ketone)s
Ding FC, Wang SJ, Xiao M, Han DM, Meng YZ |
| 1828 - 1835 |
Electronic and steric effects of methyl substituent in samarium (III) phenolates on their initiation activities in polymerization of epsilon-caprolactone
Peng F, Shen ZQ |
| 1836 - 1841 |
Effects of the vulcanizing reagent addition on the properties of CNTs/SBR powder composites
Zhou XW, Zhu YF, Liang J |
| 1842 - 1846 |
The effect of viscosity on surface tension measurements by the drop weight method
Kaully T, Siegmann A, Shacham D, Marmur A |
| 1847 - 1852 |
Influence of the gamma-ray dose on the electrical toluene diisocyanate mixed with naturally caster oil fatty acids
Akraiam FA, Elaydy AB, El-Latif AAA |
| 1853 - 1859 |
Preparation and properties of Novel Green poly(ether-ester urethane)s insulating coating based on polyols derived from glycolyzed PET, castor oil, and adipic acid and blocked isocyanate
Moeini HR |
| 1860 - 1868 |
Spectroscopic analysis of poly(ethylene naphthalate)-poly(butylene terephthalate) blends
Jung DDB, Bhattacharyya D, Eastea AJ |
| 1869 - 1879 |
Environmentally friendly biocomposites based on waste of the dairy industry and poly(vinyl alcohol)
Sedlarik V, Saha N, Kuritka I, Saha P |
| 1880 - 1884 |
Synthesis and characterization of poly(epsilon-caprolactone)-graphite oxide composites
Hua L, Kai W, Inoue Y |
| 1885 - 1888 |
Bis(azidomethyl) Oxetane/Hydroxyl-Terminated Polybutadiene/Bis(azidomethyl) oxetane triblock copolymer: Synthesis and characterization
Reddy TS, Nair JK, Satpute RS, Wagh RM, Sikder AK, Venugopalan S |
| 1889 - 1894 |
Arsenite retention properties of water-soluble metal-polymers
Rivas BL, Aguirre MD |
| 1895 - 1902 |
Synthesis of novel amino (alkylamino) deoxychitosans and those thiol-derivatives and the chemisorption Behaviors of an acid dye and Hg2+ ion onto the resulting polymers
Shimizu Y, Akiyama K, Saito Y, Nakamura T |
| 1903 - 1908 |
Effects of the injection-molding temperatures and pyrolysis cycles on the butadiene phase of high-impact polystyrene
Parres F, Balart R, Crespo JE, Lopez J |
| 1909 - 1916 |
Synthesis and characterization of novel poly(o-toluidine) montmorillonite nanocomposites: Effect of surfactant on intercalation
Singhal R, Datta M |
| 1917 - 1923 |
Synthesis, characterization, and cure reaction of methacrylate-based multifunctional monomers for dental composites
Ghaemy M, Heidaripour M, Barghamadi M |
| 1924 - 1931 |
A study on the sorption of NO3- and F- on the carboxymethylated starch-based hydrogels with Fe2+ ions
Chauhan GS, Kumar R, Verma M |
| 1932 - 1938 |
Preparation and characterization of calcium Carbonate/Low-Density-Polyethylene nanocomposites
Wang WY, Zeng XF, Wang GQ, Chen JF |
| 1939 - 1949 |
Influence of the extrusion process on the morphology and micromechanical behavior of polystyrene-block(polystyrene-co-butadiene)-block-polystyrene star block copolymer/homopolystyrene blends
Buschnakowski M, Adhikari R, Michler GH, Knoll K |
| 1950 - 1956 |
Optical sensor for aliphatic amines based on the simultaneous colorimetric and fluorescence responses of smart textile
Staneva D, Betcheva R, Chovelon JM |
| 1957 - 1963 |
Humidity-responsive polymeric films based on AOT - Water reverse microemulsions
Marszalek JE, Pojman JA, Aultman KL, Hoyle CE, Whitehead JB |
| 1964 - 1971 |
Kinetics of isothermal crystallization and subsequent melting behavior of PTT/PA12 blend
Asadinezhad A, Jafari SH, Khonakdar HA, Bohme F, Hassler R, Haussler L |
| 1972 - 1981 |
Preparation and characterization of konjac glucomannan/poly(diallydimethylammonium chloride) blend films
Lu J, Zhang JH, Xiao C |
| 1982 - 1991 |
Synthesis and association properties in water solution of random copolymers of 2-acrylamido-2-methyl-1-propane sulfonic acid and isodecyl methacrylate - Potential application as surfactants in micellar-enhanced ultrafiltration processes
Peinado C, Catalina F, Miguel VS |
| 1992 - 1999 |
Swelling and antibacterial properties for the superabsorbent hydrogels containing silver nanoparticles
Lee WF, Huang YC |
| 2000 - 2007 |
Swelling and network parameters of pH-Sensitive poly(acrylamide-co-acrylic acid) hydrogels
Turan E, Caykara T |
| 2008 - 2017 |
Effect of morphology on the electric conductivity of binary polymer blends filled with carbon black
Xu ZB, Zhao C, Gu AJ, Fang ZP, Tong LF |
| 2018 - 2024 |
Poly(1,3-propylene glycol-hexanedioic acid) grafted hydroxyl multiwall carbon nanotubes
Meng QJ, Zhang XX, Bai SH |
| 2025 - 2030 |
Miscibility and intermolecular hydrogen-bonding interactions in poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)/poly(4-vinyl phenol) binary blends
Alata H, Zhu B, Inoue Y |
| 2031 - 2040 |
Effect of nanoscale fully vulcanized acrylic rubber powders on crystallization of poly(butylene terephthalate): Nonisothermal crystallization
Huang JW |
| 2041 - 2046 |
Synthesis and characterization of beta-CD derivatized bovine serum albumin protein as chiral selector in pressurized capillary electrochromatography
Dai RJ, Tang L, Li H, Deng YL, Fu RN, Parveen ZH |
| 2047 - 2055 |
Mechanical properties of epoxy networks based on DGEBA and aliphatic Amines
Garcia FG, Soares BG, Pita VJRR, Sanchez R, Rieumont J |
| 2056 - 2064 |
Plasma surface modification and characterization of collagen-based artificial cornea for enhanced epithelialization
Rafat M, Griffith M, Hakim M, Muzakare L, Li F, Khulbe KC, Matsuura T |
| 2065 - 2074 |
Time-temperature dependence of the electrical resistivity of high-density polyethylene/carbon black composites
Traina M, Pegoretti A, Penati A |
| 2075 - 2082 |
Fluorocarbon-containing hydrophobically modified poly(acrylic acid) gels as drug release system
Zhao X, Tian Q, Tang XZ |
| 2083 - 2091 |
A new method to visualize and characterize the pore structure of TENCEL (R) (Lyocell) and other man-made cellulosic fibres using a fluorescent dye molecular probe
Abu-Rous M, Varga K, Bechtold T, Schuster KC |
| 2092 - 2100 |
Recycled PET-organoclay nanocomposites with enhanced processing properties and thermal stability
Kracalik M, Studenovsky M, Mikesova J, Kovarova J, Sikora A, Thomann R, Friedrich C |
| 2101 - 2110 |
Effect of percolation on electrical and dielectric properties of acrylonitrile butadiene styrene/graphite composite
Dahiya HS, Kishore N, Mehra RM |
| 2111 - 2116 |
Curing behavior of a novel polytriazole resin
Wan LQ, Tian JJ, Huang JZ, Hu YH, Huang FR, Du L |
| 2117 - 2125 |
Preparation of novel ZSM-5 zeolite-filled chitosan membranes for pervaporation separation of dimethyl carbonate/methanol mixtures
Liu BB, Cato YM, Wang TH, Yuan Q |
| 2126 - 2131 |
Preparation and characterization of novel poly(glycidyl methacrylate) beads carrying amidoxime groups
Caykara T, Alaslan SS |
| 2132 - 2139 |
E-beam-cured layered-silicate and spherical silica epoxy nanocomposites
Chen CG, Anderson DP |
| 2140 - 2148 |
Development and characterization of homopolymers and copolymers from the family of polyphenylene oxides
Tran A, Kruczek B |
| 2149 - 2149 |
Tailoring of elastomeric grafted coating via sol-gel chemistry of crosslinked polymethylhydrosiloxane (vol 104, pg 1504, 2007)
Thami T, Bresson B, Fretigny C |
| 2150 - 2150 |
Morphology and properties of nanocomposites from organoclays with reduced cation exchange capacity (vol 105, pg 2910, 2007)
Chavarria F, Nairn K, White P, Hill AJ, Hunter DL, Paul DR |
