| 1237 - 1246 |
A Stacked Neural Network Approach for Yield Prediction of Propylene Polymerization
Monemian SA, Shahsavan H, Bolouri O, Taranejoo S, Goodarzi V, Torabi-Angaji M |
| 1247 - 1253 |
Performance of Fibers Embedded in a Cementitious Matrix
Pakravan HR, Jamshidi M, Latifi M |
| 1254 - 1263 |
Effects of Crosslinking Modification on the O-2/N-2 Separation Characteristics of Poly(phenyl sulfone)/Poly(bisphenol A-co-4-nitrophthalic anhydride-co-1,3-phenylenediamine) Blend Membranes
Weng TH, Tseng HH, Wey MY |
| 1264 - 1271 |
Numerical Simulation of Bubble Growth in a Limited Amount of Liquid
Xu XM, Zhao GQ, Li HP |
| 1272 - 1277 |
Covalent Functionalization of Multiwalled Carbon Nanotubes with Polybutadiene
Chen HB, Xiong H, Gao Y, Li HM |
| 1278 - 1283 |
Effect of Polymerically-Modified Clay Structure on Morphology and Properties of UV-Cured EA/Clay Nanocomposites
Chen D, Zang YL, Su SP |
| 1284 - 1290 |
The Surface Modification of Medical Polyurethane to Improve the Hydrophilicity and Lubricity: The Effect of Pretreatment
Zhou XF, Zhang TZ, Jiang XL, Gu N |
| 1291 - 1298 |
Factorial Experimental Design on Synthesis of Functional Core/Shell Polymeric Nanoparticles via Differential Microemulsion Polymerization
Norakankorn C, Pan QM, Rempel GL, Kiatkamjornwong S |
| 1299 - 1305 |
Preparation and Properties of Polyurethane/Benzyl Amylose Semi-Interpenetrating Networks
Cao XD, Tao YZ, Lucia LA, Zhang LN |
| 1306 - 1312 |
Preparation and Characterization of Metal-Chelated Poly(HEMA-MAH) Monolithic Cryogels and Their Use for DNA Adsorption
Odabasi M, Baydemir G, Karatas M, Derazshamshir A |
| 1313 - 1321 |
Sea-Island Polyurethane/Polycarbonate Composite Nanofiber Fabricated Through Electrospinning
Liu RL, Cai N, Yang WQ, Chen WD, Liu HQ |
| 1322 - 1328 |
Influence of Carbon Nanotubes with Different Functional Groups on the Morphology and Properties of PPO/PA6 Blends
Shen Y, Guo ZH, Cheng J, Fang ZP |
| 1329 - 1333 |
Application of Thermosetting Organic Solvent Free Polymer Gel Electrolyte in Quasi-Solid-State Dye-Sensitized Solar Cell
Lan Z, Wu JH, Lin JM, Huang ML |
| 1334 - 1341 |
Effect of Crystallinity on Enthalpy Recovery Peaks and Cold-Crystallization Peaks in PET via TMDSC and DMA Studies
Shieh YT, Lin YS, Twu YK, Tsai HB, Lin RH |
| 1342 - 1347 |
Preparation, Characterization, and Drug-Release Properties of pH/Temperature-Responsive Poly(N-isopropylacrylamide)/Chitosan Semi-IPN Hydrogen Particles
Chen XC, Song H, Fang T, Bai JX, Xiong J, Ying HJ |
| 1348 - 1356 |
Equilibrium Swelling of Polystyrene by Alkanes and Carboxylic Acids: A Simple Quantitative Correlation Model
Bernardo G, Vesely D |
| 1357 - 1365 |
Relationship Between Structure and Rheological, Mechanical and Thermal Properties of Polylactide/Cloisite 30B Nanocomposites
Zaidi L, Bruzaud S, Bourmaud A, Mederic P, Kaci M, Grohens Y |
| 1366 - 1375 |
Electroanalytical Studies on Electrically Conducting Polyaniline:Polyethyleneterephthalate Composite Films
Khalid M, Mohammad F |
| 1376 - 1383 |
A Multifunctional Hydrogel with High-Conductivity, pH-Responsive, and Release Properties from Polyacrylate/Polyptrrole
Lin JM, Tang QW, Wu JH, Li QH |
| 1384 - 1391 |
Investigation on the Melt Spinning Fibers of PP/Organoclay Nanocomposites Prepared by In-Situ Polymerization
Hao CW, Zhao Y, He AH, Zhang XQ, Wang DJ, Ma QF, Xu YZ |
| 1392 - 1399 |
Novel 2,4-Divinyl-3-Alkylthiophene/1,3,4-Oxadiazole Alternating Conjugated Copolymer Synthesized by the Heck Coupling Method: Synthesis, Characterization, and Electronic and Optical Properties
Qi ZJ, Wei B, Shi C, He YF, Yu J, Wang XM, Kang F, Jin B, Sun YM |
| 1400 - 1407 |
Synthetic Resin. XII. Synthesis and Characterization of New Terpolymer Resins Derived from 8-Hydroxyquinoline 5-Sulfonic Acid, Melamine, and Formaldehyde
Singru RN, Gurnule WB, Zade AB |
| 1408 - 1413 |
Crystallization Kinetics of cis-1,4-Polybutadiene
Di Lorenzo ML |
| 1414 - 1421 |
Preparation of Adsorbent for Palladium Ions by Amination of Acrylonitrile Grafted Polypropylene Nonwoven Fabrics
Zu JH, He SQ, Nho YC, Pyo JJ, Yan F |
| 1422 - 1427 |
Synthesis and Characterization of Hetarylazo Disperse Colorants: Preparation and Properties of Conventional and Microemulsified Inks for Polyester Ink-Jet Printing
Kosolia CT, Tsatsaroni EG |
| 1428 - 1441 |
Effect of Different Nanoparticles on Thermal, Mechanical and Dynamic Mechanical Properties of Hydrogenated Nitrile Butadiene Rubber Nanocomposites
Choudhury A, Bhowmick AK, Ong C |
| 1442 - 1449 |
Characterization of Microfibrillar Reinforced Poly(ethylene naphthalate)/Polypropylene Composites via Polarized Raman and Polarized FTIR Spectroscopy
Leung KL, Easteal AJ |
| 1450 - 1458 |
Synthesis and Properties of Novel Poly(coumarin-amide)s
Nechifor M |
| 1459 - 1466 |
Rheological Behaviors of PVA/H2O Solutions of High-Polymer Concentration
Gao HW, Yang RJ, He JY, Yang L |
| 1467 - 1474 |
Effect of Metallic Flask Closure and Investment Materials on the Stability of the Denture Base Resin
Consani RLX, Mesquita MF, Sobrinho LC, Sinhoreti MAC |
| 1475 - 1482 |
The Stabilization of Bisphenol-A Based Polycarbonate by Phosphine Oxide
Ozden S, Shaov AK, Charaev AM |
| 1483 - 1490 |
Study on the Interfacial Properties of Three-Dimensionally Arranged Glass Fiber/Epoxy Resin Model Composites
Moon CK |
| 1491 - 1498 |
Sulfonated Poly(ether sulfone)/Silica Composite Membranes for Direct Methanol Fuel Cells
Wen S, Gong CL, Tsen WC, Shu YC, Tsai FC |
| 1499 - 1508 |
Characterization of Molecularly Imprinted and Nonimprinted Polymer Submicron Particles Specifically Tailored for Removal of Trace 17 beta-Estradiol in Water Treatment
Lai EPC, De Maleki Z, Wu SY |
| 1509 - 1514 |
Adsorption of Nile Red by Poly(N-isopropylacrylamide) Gels in Binary Water/Tetrahydrofuran Mixtures
Thivaios I, Bokias G |
| 1515 - 1523 |
Synthesis and Characterization of a New Type of Sulfonated Poly(ether ether ketone ketone)s for Proton Exchange Membranes
Zhang G, Fu TZ, Wu J, Li XF, Na H |
| 1524 - 1537 |
Synthesis and Characterization of Polypyrrole Composites for Corrosion Protection of Steel
Selvaraj M, Palraj S, Maruthan K, Rajagopal G, Venkatachari G |
| 1538 - 1544 |
DC Electrical Conductivity of Polyazomethinethiosemicarbazone Metal Complexes
El-Shekeil A, Al-Yusufy F, Abdulla AHA |
| 1545 - 1551 |
Surface Modification of Textiles by Glow Discharge Technique: Part II: Low Frequency Plasma Treatment of Wool Fabrics with Acrylic Acid
Kutlu B, Aksit A, Mutlu M |
| 1552 - 1557 |
Application of Confocal Laser Scanning Microscope Technique to Visualize Dynamic Sorption Behavior of Perylene in Cellulose Acetate Film
Hasegawa T, Matsui T, Matsumoto K |
| 1558 - 1565 |
Modification of Low-Density Polyethylene by Graft Copolymerization with Maleic Anhydride and Blends with Polyamide 6
Iqbal M, Chuai CZ, Huang Y, Che CH |
| 1566 - 1573 |
Effects of Solvent Sort, PES and PVP Concentration on the Properties and Morphology of PVDF/PES Blend Hollow Fiber Membranes
Wu LS, Sun JF, He CJ |
| 1574 - 1580 |
Synthesis of Well-Defined Comblike Hydroxy-Functionalized Atactic Polystyrene Promoted by Metallocene/Tin/Poly(phenyl glycidyl ether)-co-Formaldehyde
Ma LF, Sheng YP, Huang QG, Deng KX, Gao KJ, Yang WT |
| 1581 - 1586 |
High-Strength and High-Toughness Polyimide Nanofibers: Synthesis and Characterization
Cheng CY, Chen J, Chen F, Hu P, Wu XF, Reneker DH, Hou HQ |
| 1587 - 1592 |
Electrical and Optical Properties of Polyaniline with a Weblike Morphology
Mallick K, Witcomb M, Erasmus R, Strydom A |
| 1593 - 1596 |
Weibull Statistics In Electrical Aging of Polyesterimide Under AC Voltage
Nedjar M, Beroual A |
| 1597 - 1602 |
Optimization of the Reaction Conditions and Characterization of L-Lactic Acid Direct Polycondensation Products Catalyzed by a Non-Metal-Based Compound
Sedlarik V, Kucharczyk P, Kasparkova V, Drbohlav J, Salakova A, Saha P |
| 1603 - 1610 |
Benzotrifluoromethyl Group-Substituted Poly(para-phenylenevinylene): Effect on Solubility, Optical, and Electronic Properties
Chatterjee S, Sen SK, Maji S, Dasgupta B, Banerji P, Banerjee S |
| 1611 - 1616 |
Synthesis of Lactose-Containing Glycopolymer-Grafted Silica Gel Particles
Guo TY, Liu P, Xia YQ, Song MD |
| 1617 - 1625 |
Influence of Steaming Pressure on Steam Explosion Pretreatment of Lespedeza stalks (Lespedeza cyrtobotrya). II. Characteristics of Degraded Lignin
Wang K, Jiang JX, Xu F, Sun RC |
| 1626 - 1634 |
Fabrication and Properties of Solution-Cast Polyaniline/Carboxymethylchitin Blend Films
Thanpitcha T, Sirivat A, Jamieson AM, Rujiravanit R |
| 1635 - 1639 |
The Molecular Arrangement of Bifenthrin (R) in Ether Based Polyurethane: Designing a Synthetic Termite Barrier
Rajendran S, Cribb BW, Stewart A, Zalucki M, Noller B, Truss RW |
| 1640 - 1649 |
Synthesis and Characterization of Quaternary Ammonium PEGDA Dendritic Copolymer Networks for Water Disinfection
Abid CKVZ, Chattopadhyay S, Mazumdar N, Singh H |
| 1650 - 1659 |
Synthesis and Properties of Novel Aromatic Polyamides with Xanthene Cardo Groups
Sheng SR, Ma CX, Jiang JW, Huang ZZ, Song CS |
| 1660 - 1670 |
Effect of Treatment of Bis(3-triethoxysilyl propyl)tetrasulfane on Physical Property of In Situ Sodium Activated and Organomodified Bentonite Clay - SBR Rubber Nanocomposite
Chakraborty S, Kar S, Dasgupta S, Mukhopadhyay R, Bandyopadhyay S, Joshi M, Ameta SC |
| 1671 - 1677 |
Poly(vinyl alcohol) and Layered Double Hydroxide Composites: Thermal and Mechanical Properties
Ramaraj B, Nayak SK, Yoon KR |
| 1678 - 1685 |
Rubber-Like Thermosetting Epoxy Asphalt Composites Exhibiting Atypical Yielding Behaviors
Kang Y, Chen ZM, Jiao Z, Huang W |
| 1686 - 1693 |
Preparation and Properties of Sulfopropyl Chitosan Derivatives with Various Sulfonation Degree
Tsai HS, Wang YZ, Lin JJ, Lien WF |
| 1694 - 1699 |
Preparation of Semirigid Polyurethane Foam with Liquefied Bamboo Residues
Gao LL, Liu YH, Lei HW, Peng H, Ruan R |
| 1700 - 1709 |
Surface Modification of Nylon Membrane by Glycidyl Methacrylate Graft Copolymerization for Antibody Immobilization
Jackeray R, Jain S, Chattopadhyay S, Yadav M, Shrivastav TG, Singh H |
| 1710 - 1717 |
Comparative Study of Additives on Visualized Dynamic Sorption Behavior of Perylene in Cellulose Acetate Film by Confocal Laser Scanning Microscope Technique
Hasegawa T, Matsui T, Matsumoto K |
| 1718 - 1724 |
Electrolyte-Based Antistatic Plasticizer for Soft Poly(vinyl chloride) Composites
Che RS, Yang WQ, Wang JL, Lei JX |
| 1725 - 1731 |
Novel Biodegradable Form Stable Phase Change Materials: Blends of Poly(ethylene oxide) and Gelatinized Potato Starch
Pielichowska K, Pielichowski K |
| 1732 - 1738 |
Glutaraldehyde-Crosslinked Poly(vinyl alcohol) Hydrogel Discs for the Controlled Release of Antidiabetic Drug
More SM, Kulkarni RV, Sa B, Kayane NV |
| 1739 - 1746 |
Structure and Properties of High Melt Strength Polypropylene Prepared by Combined Method of Blending and Crosslinking
An YJ, Zhang ZJ, Wang YH, Qiu J, Tang T |
| 1747 - 1758 |
Droplet Size and Morphology for the Aqueous Two-Phase Polymerization of Acrylamide in an Aqueous Poly(ethylene glycol) Solution
Lu T, Shan GR |
| 1759 - 1765 |
Biobased Composites Prepared by Compression Molding with a Novel Thermoset Resin from Soybean Oil and a Natural-Fiber Reinforcement
Adekunle K, Akesson D, Skrifvars M |
| 1766 - 1774 |
Investigation of Thermally Conducting Phase-Change Materials Based on Polyethylene/Wax Blends Filled with Copper Particles
Molefi JA, Luyt AS, Krupa I |
| 1775 - 1781 |
Renewable Elastomers Based on Blends of Maleated Polypropylene and Plasticized Starch
Deleo C, Goetz J, Young B, Velankar SS |
| 1782 - 1787 |
Preparation and Properties of Carbon Fiber/Hydroxyapatite-Poly(methyl methacrylate) Biocomposites
Huang JF, Li JY, Cao LY, Zeng LP |
| 1788 - 1795 |
Characterization and Thermal Stability of Cellulose-graft-Polyacryloniytrile Prepared by Using KMnO4/Citric Acid Redox System
El-Khouly AS, Takahashi Y, Takada A, Safaan AA, Kenawy E, Hafiz YA |
| 1796 - 1802 |
Shrinkage in Extruded Moisture Crosslinked Silane-Grafted Polyethylene Wire Insulation
Ghosh-Dastidar A, Cogen JM |
| 1803 - 1810 |
Diffusion Coefficients of Polychlorinated Biphenyls and Polycyclic Aromatic Hydrocarbons in Polydimethylsiloxane and Low-Density Polylethylene Polymers
Rusina TP, Smedes F, Klanova J |
| 1811 - 1822 |
Statistical Thermal Stability of PVC
Savrik SA, Erdogan BC, Balkose D, Ulku S |
| 1823 - 1831 |
Relating Microhardness to Injection Molding Induced Morphology: A Study of Microbeam Synchrotron WAXD
Kobayashi Y, Kanno H, Hanamoto Y, Ando M, Kanai T |
| 1832 - 1841 |
Novel Thermo-Responsive Semi-Interpenetrating Network Microspheres of Gellan Gum-Poly(N-isopropylacrylamide) for Controlled Release of Atenolol
Mundargi RC, Shelke NB, Babu VR, Patel P, Rangaswamy V, Aminabhavi TM |
| 1842 - 1856 |
Modeling of Diffusion-Controlled Reactions in Free Radical Solution and Bulk Polymerization: Model Validation by DSC Experiments
Achilias DS, Verros GD |
