| 1245 - 1251 |
Resins IV: Preparation and Characterization of Terpolymer Resins Prepared from Biphenol, Thiourea and Formaldehyde
Jadhao MM, Paliwal LJ, Bhave NS |
| 1252 - 1256 |
Curing Behavior and Mechanical Properties of Hollow Glass Microsphere/Bisphenol A Dicyanate Ester Composites
Wang JH, Liang GZ, He SB, Yang LL |
| 1257 - 1269 |
Possibilities of Polymer-Aided Dyeing of Cotton Fabric with Reactive Dyes at Neutral pH
Agarwal BJ, Bhattacharya SD |
| 1270 - 1277 |
Factorial Optimization of the Effects of Extrusion Temperature Profile and Polymer Grade on As-Spun Aliphatic-Aromatic Copolyester Fibers. I. Birefringence and Overall Orientation
Younes B, Fotheringham A, El-Dessouky HM |
| 1278 - 1287 |
Role of a Compatibilizer in the Structure and Micromechanical Properties of Recycled Poly(ethylene terephthalate)/Polyolefin Blends with Clay
Hellati A, Benachour D, Cagiao ME, Boufassa S, Calleja FJB |
| 1288 - 1296 |
Electrospray Modeling of Highly Viscous and Non-Newtonian Liquids
Moghadam H, Samimi M, Samimi A, Khorram M |
| 1297 - 1305 |
Effect of Modified Layered Silicates on the Confined Crystalline Morphology and Thermomechanical Properties of Poly(ethylene oxide) Nanocomposites
Abraham TN, Siengchin S, Ratna D, Karger-Kocsis J |
| 1306 - 1312 |
Some Parameter Characteristics of Thermally Treated Viscose Fibers
Fouda IM, Oraby AH, Seisa EA |
| 1313 - 1319 |
A Water-Soluble Amphoteric Copolymer: Synthesis and Its Dispersion Properties on Cement Particles
Weng WH, Hsu KC, Sheen YN |
| 1320 - 1330 |
Viscoelastic Properties and Morphological Characteristics of Polymer-Modified Bitumen Blends
Vasiljevic-Shikaleska A, Popovska-Pavlovska F, Cimmino S, Duraccio D, Silvestre C |
| 1331 - 1334 |
Elastic Properties of Adhesive Polymers. III. Adhesive Polymer Films Under Dry and Wet Conditions Characterized by Means of Nanoindentation
Konnerth J, Stockel F, Muller U, Gindl W |
| 1335 - 1340 |
Polypropylene/Carbon Nanotube Composites Prepared with a Environmentally Benign Processes
Kim J, Jung Y, Kwark YJ, Jeong Y |
| 1341 - 1348 |
Effect of Microorganisms During the Initial Coagulum Maturation of Hevea Natural Rubber
Intapun J, Sainte-Beuve J, Bonfils F, Tanrattanakul V, Dubreucq E, Vaysse L |
| 1349 - 1355 |
An Investigation into the Morphology and Electro-Optical Properties of 2-Hydroxy Ethyl Methacrylate Polymer Dispersed Liquid Crystals
Chang HL, Chen CM |
| 1356 - 1363 |
Rheological Behavior and Mechanical Properties of High-Density Polyethylene Blends with Different Molecular Weights
Bai L, Li YM, Yang W, Yang MB |
| 1364 - 1371 |
Pervaporation Separation of Methanol/Methyl tert-Butyl Ether with Poly(lactic acid) Membranes
Zereshki S, Figoli A, Madaeni SS, Simone S, Drioli E |
| 1372 - 1379 |
Synthesis and Evaluation of a Star Amphiphilic Block Copolymer from Poly(E-caprolactone) and Poly(ethylene oxide) as Load and Release Carriers for Guest Molecules
Jiang GH, Xu H |
| 1380 - 1385 |
Synthesis and Application of Methylcellulose Extracted from Waste Newspaper in CPV-ARI Portland Cement Mortars
Oliveira GD, Rodrigues G, Vieira JG, De Assuncao RMN, Meireles CD, Cerqueira DA, de Oliveira RJ, Silva WG, Motta LAD |
| 1386 - 1394 |
Synthesis and Characterization of Poly(3-octylthiophene)/ Single Wall Carbon Nanotube Composites for Photovoltaic Applications
Kim HJ, Koizhaiganova RB, Karim MR, Lee GH, Vasudevan T, Lee MS |
| 1395 - 1405 |
Studies on an Argon Laser-Induced Photopolymerization Employing Both Mono- and Bischromophoric Hemicyanine Dye-Borate Complex as a Photoinitiator. Part III
Jedrzejewska B, Urbanski S |
| 1406 - 1413 |
Viscoelastic Characteristics of Shape Memory Polymers
Wang ZD, Li ZF, Wang LY, Xiong ZY, Wang ZD, Li ZF, Wang LY, Xiong ZY |
| 1414 - 1420 |
Catalytic Oxidation of Polyethylene with Oxygen Under Solid-State Conditions
Zawadiak J, Marek AA, Orlinska B, Stec Z |
| 1421 - 1429 |
Rapid Decomposition of a Cationic Azo-Initiator Under Microwave Irradiation
Costa C, Santos VHS, Araujo PHH, Sayer C, Santos AF, Dariva C, Fortuny M |
| 1430 - 1435 |
On Increasing the Inhibiting Property of Amine Antioxidant in Contact With Copper and Its Compounds
Lin DG, Vorobyova EV |
| 1436 - 1441 |
A Study of the Recycling and Stability of Flexographic Photopolymer Plates
Cordeiro CC, Bernardin AM, Da Silva L, Fiori MA, Benavides R, Oenning LW, Paula MMS |
| 1442 - 1449 |
Facile Method to Manipulate the Molecular Weight and Practical Mass Production of Chitosan by Mechanical Shearing and Concurrent Ultrafiltration Treatment
Tsai ML, Tseng LZ, Chang HW, Hsu CH, Chen RH |
| 1450 - 1454 |
Stability Study of Inverse Suspension Copolymerization of 1,1,3,3-Tetramethylguandium Acrylate and N,N'-Methylenebisacrylamide
Dong J, Wu LB, An D, Li BG, Zhu SP |
| 1455 - 1461 |
Synthesis and Characterization of Poly(1-vinyl-3-propylimidazolium) Iodide for Quasi-Solid Polymer Electrolyte in Dye-Sensitized Solar Cells
Jin X, Tao J, Yang Y |
| 1462 - 1468 |
Pyrrole-Based Narrow-Band-Gap Copolymers for Red Light-Emitting Diodes and Bulk Heterojunction Photovoltaic Cells
Sun ML, Wang L, Yang W |
| 1469 - 1475 |
Studies on Jute/Glass/Hybrid Composites of Polyurethane Based on Epoxy Resin of 9,9'-bis(4-hydroxy phenyl) Anthrone-10(EBAN) and PEG-200
Bhuva BD, Parsania PH |
| 1476 - 1488 |
Effect of Biodegradation on Thermal and Crystalline Behavior of Polypropylene-Gelatin Based Copolymers
Khanna ND, Kaur I, Bhalla TC, Gautam N |
| 1489 - 1493 |
Effect of Mixing Conditions on Mechanical Properties of Polylactide/Montmorillonite Clay Nanocomposites
Jollands M, Gupta RK |
| 1494 - 1506 |
Synthesis and Characterization of Electrically Conducting Copolymers Based on Biphenyl and Thiophene
Simitzis J, Triantou D, Soulis S |
| 1507 - 1512 |
Preparation and Characterization of PS-PMMA/ZnO Nanocomposite Films with Novel Properties of High Transparency and UV-Shielding Capacity
Ge JL, Zeng XF, Tao X, Li X, Shen ZG, Yun J, Chen JF |
| 1513 - 1519 |
New Method for Preparation of Hydrophobic Interaction Chromatographic Stationary Phases Based on Polymer-Grafted Silica and Their Chromatographic Properties
Wang FH, Dai XJ, Gong BL |
| 1520 - 1526 |
Origin of Double Melting Peaks of alpha-Form Isotactic Polypropylene: Recrystallization and Lamellar Thickness Hierarchy
Yang JH |
| 1527 - 1533 |
Novel Amphiphilic Polymer Gel Electrolytes Based on (PEG-b-GMA)-co-MMA
Luo D, Li P, Li Y, Yang MJ |
| 1534 - 1540 |
Effect of Wood Flour Loading and Thermal Annealing on Viscoelastic Properties of Poly(lactic acid) Composite Films
Hrabalova M, Gregorova A, Wimmer R, Sedlarik V, Machovsky M, Mundigler N |
| 1541 - 1551 |
Structure and Properties of Phase Change Materials Based on HDPE, Soft Fischer-Tropsch Paraffin Wax, and Wood Flour
Mngomezulu ME, Luyt AS, Krupa I |
| 1552 - 1560 |
The Effect of Adjuvant on the Halogen-Free Intumescent Flame Retardant ABS/PA6/SMA/APP Blend
Lu CX, Wang J, Chen L, Fu QA, Cai XF |
| 1561 - 1566 |
Polymerization of Ethylene by Supported Zirconium Alkoxide Complex
Basso NRD, Galland GB, dos Santos JHZ, Fim F, Sauer C, Carone C |
| 1567 - 1573 |
PVA Cryogel Membranes as a Promising Tool for the Retention and Separation of Metal Ions from Aqueous Solutions
Papancea A, Valente AJM, Patachia S |
| 1574 - 1581 |
Reinforcing Rubber with Carbon Nanotubes
Nah C, Lim JY, Cho BH, Hong CK, Gent AN |
| 1582 - 1588 |
Synthesis and Properties of Sulfonated Aromatic Fluoro-Polymers
Endo K, Yamade T |
| 1589 - 1597 |
Halogen-Free Intumescent Flame Retardant Acrylonitrile-Butadiene-Styrene/Poly(ethylene terephthalate) Blends
Zhao GD, Pan ZL, Lu CX, Cai XF |
| 1598 - 1605 |
Electrical and Mechanical Properties of Bismuth Oxide Nanowire/Poly(vinyl acetate)
Mahmoud WE, Al-Ghamdi AA |
| 1606 - 1614 |
A Study of the Effect of Oxygen Plasma Treatment on the Interfacial Properties of Carbon Fiber/Epoxy Composites
Ma KM, Chen P, Wang BC, Cui GL, Xu XM |
| 1615 - 1619 |
Preparation of Low Refractive Index Fluorinated Materials for Antireflection Coatings
Liu BT, Yeh WD, Wang WH |
| 1620 - 1633 |
Effects of Carbon Fillers on Tensile and Flexural Properties in Polypropylene-Based Resins
Gaxiola DL, Jubinski MM, Keith JM, King JA, Miskioglu I |
| 1634 - 1642 |
Synthesis and Characterization of Temperature-Sensitive Block Copolymers from Poly(N-isopropylacrylamide) and 4-Methyl-epsilon-caprolactone or 4-Phenyl-epsilon-caprolactone
Lee RS, Huang YT, Chen WH |
| 1643 - 1650 |
Influence of a Novel Castor-Oil-Derived Additive on the Mechanical Properties and Oxygen Diffusivity of Polystyrene
Klinger M, Tolbod LP, Ogilby PR |
| 1651 - 1657 |
Synthesis and Evaluation of High-Molecular Weight Diphenyl Oxide and Diphenyl Sulfide Novolacs
Konishi GI, Nojiri Y, Matsuo T, Nemoto T, Asai K, Sumi K, Nakamoto Y |
| 1658 - 1665 |
Morphology and Mechanical Properties of Soy Protein Scaffolds Made by Directional Freezing
Guan JA, Porter D, Tian K, Shao ZZ, Chen X |
| 1666 - 1674 |
Synthesis and Characterization of Nano-Sized NiO and Its Surface Catalytic Effect on Poly(vinyl alcohol)
Gandhi S, Nagalakshmi N, Baskaran I, Dhanalakshmi V, Nair MRG, Anbarasan R |
| 1675 - 1682 |
Preparation, Characterization, and Properties of Sodium Montmorillonite Clay/Poly(styrene-butadiene-styrene) Containing Quaternary Ammonium Cations and Photoinitiator Nanocomposites via Ultraviolet Exposure
Wu GL, Xie YY, Ou EC, Zhang LL, Xiong YQ, Xu WJ |
| 1683 - 1690 |
Nylon 6 Crystal-Phase Transition in Nylon 6/Clay/Poly(vinyl alcohol) Nanocomposites
Cui L, Yeh JT |
| 1691 - 1703 |
Enhancing Cell Nucleation of Thermoplastic Polyolefin Foam Blown with Nitrogen
Kim SG, Lee JWS, Park CB, Sain M |
| 1704 - 1712 |
Characterization of Polystyrene-b-poly(ethylene oxide) Diblock Copolymer and Investigation of Its Micellization Behavior in Water
Ahmad F, Baloch MK, Jamil M, Jeon YJ |
| 1713 - 1719 |
Utilization of Waste Leather Shavings as Filler in Paper Making
Mohamed OA, Kassem NF |
| 1720 - 1727 |
Abrasion and Nanoscratch in Nanostructured Epoxy Coatings
Turri S, Torlaj L, Piccinini F, Levi M |
| 1728 - 1737 |
Synthesis and Characterizations of Nanosized Iron(II) Hydroxide and Iron(II) Hydroxide/Poly(vinyl alcohol) Nanocomposite
Parveen MF, Umapathy S, Dhanalakshmi V, Anbarasan R |
| 1738 - 1742 |
Application of the Biodegradable Diblock Copolymer Poly(L-lactide)-block-Poly(L-cysteine): Drug Delivery and Protein Conjugation
Sun J, Chen XS, Wei JZ, Yan LS, Jing XB |
| 1743 - 1751 |
Hybrid Titanium Catalyst Supported on Core-Shell Silica/Poly(styrene-co-acrylic acid) Carrier
Du LJ, Li W, Fan LN, Jiang BB, Wang JD, Yang YR, Liao ZW |
| 1752 - 1765 |
Microporous Carbon-Nitrogen Fibers from Keratin Fibers by Pyrolysis
Senoz E, Wool RP |
| 1766 - 1773 |
Adhesion Property and Morphology of Styrene Triblock/Diblock Copolymer Blends
Sasaki M, Adachi M, Kato Y, Fujii S, Nakamura Y, Urahama Y, Sakurai S |
| 1774 - 1786 |
Influence of Structure of Organic Modifiers and Polyurethane on the Clay Dispersion in Nanocomposites via In Situ Polymerization
Rama MS, Swaminathan S |
| 1787 - 1795 |
Phase Diagrams of Poly(ethylene-co-vinyl alcohol) and Dimethylformamide Solutions Exhibiting Both Liquid-Liquid and Solid-Liquid Phase Separation
De Lima JA, Felisberti MI |
| 1796 - 1804 |
Study of the Viscoelastic Properties of PC/ABS Blend Containing Triphenyl Phosphate and Nanoclay and Its Correlation with Morphology
Feyz E, Jahani Y, Esfandeh M, Ghafelehbashi M, Jafari SH |
| 1805 - 1814 |
Gadolinium-Conjugated FA-PEG-PAMAM-COOH Nanoparticles as Potential Tumor-Targeted Circulation-Prolonged Macromolecular MRI Contrast Agents
Zhang WL, Li N, Huang J, Yu JH, Wang DX, Li YP, Liu SY |
| 1815 - 1820 |
Incorporation of 4-Aminobenzene Functionalized Multi-Walled Carbon Nanotubes in Polyaniline for Application in Formic Acid Electrooxidation
Shi J, Zhang ZY, Hu YQ, Hua YX |
| 1821 - 1829 |
Investigation and Prevention of Clogging During Electrospinning of Zein Solution
Kanjanapongkul K, Wongsasulak S, Yoovidhya T |
| 1830 - 1836 |
Hydroxytelechelic Hydrocarbon Copolymers with High Aging Resistance for Elastomeric Materials
Gascon C, Lucas F, Carlotti S, Deffieux A |
| 1837 - 1845 |
Evaluation of the Potential of Polymeric Carriers Based on Chitosan-grafted-Polyacrylonitrile in the Formulation of Drug Delivery Systems
Sarhan AA, Monier M, Ayad DM, Badawy DS |
| 1846 - 1852 |
Enhanced Compatibility of PA6/POE Blends by POE-g-MAH Prepared Through Ultrasound-Assisted Extrusion
Xie TT, Wu H, Bao WT, Guo SY, Chen Y, Huang H, Chen HY, Lai SY, Jow J |
| 1853 - 1858 |
Magnesium Chloride Supported Ziegler-Natta Catalysts Containing Succinate Internal Electron Donors for the Polymerization of Propylene
Wen XJ, Ji MA, Yi QF, Niu H, Dong JY |
| 1859 - 1866 |
Dissolution of Styrene-Butadiene Block Copolymers in Biodiesel
Zhang Y, Mallapragada SK, Narasimhan B |
