| 1455 - 1457 |
Scientific Ethics
Tonzani S, Crichton HJ |
| 1458 - 1465 |
Properties of Rigid Polyurethane Foams Prepared from Recycled Aircraft Deicing Agent with Hexamethylene Diisocyanate
Wang B, Cheng YL, Liu YH, Chen P, Li D, Ruan R |
| 1466 - 1474 |
Effect of process conditions on the dart impact properties of thin-wall injection-molded polycarbonate plates
Moon JS, Lee JM, Lee SH, Choi BH |
| 1475 - 1484 |
Scaffolds based on hydroxypropyl starch: Processing, morphology, characterization, and biological behavior
Silva I, Gurruchaga M, Goni I, Fernandez-Gutierrez M, Vazquez B, San Roman J |
| 1485 - 1492 |
Synthesis, characterization, and self-assembly of amphiphilic fluorinated gradient copolymer
Chen YJ, Zhang YY, Wang YF, Sun C, Zhang CC |
| 1493 - 1501 |
Synthesis of a new siloxane-containing alicyclic dianhydride and the derived polyimides with improved solubility and hydrophobicity
Xiong L, Wang XL, Qi HX, Liu F |
| 1502 - 1507 |
Polystyrene/calcium carbonate nanocomposites prepared by in situ polymerization in the presence of maleic anhydride
Luo WH, Liu XX, Sun LM |
| 1508 - 1518 |
Preparation of antibacterial PDMAEMA-functionalized multiwalled carbon nanotube via atom transfer radical polymerization
Joo YT, Jung KH, Kim MJ, Kim Y |
| 1519 - 1526 |
Cationic fluorinated polyacrylate core-shell latex with pendant long chain alkyl: Synthesis, film morphology, and its performance on cotton substrates
An QF, Xu W, Hao LF, Huang LX |
| 1527 - 1537 |
Frequency and temperature dependence of poly(N-isopropylacrylamide) gel rheology
Parmar AS, Hill S, Vidyasagar A, Bello C, Toomey R, Muschol M |
| 1538 - 1543 |
Synthesis and characterization of proton conducting polymer electrolyte based on poly(N-vinyl pyrrolidone)
Vijaya N, Selvasekarapandian S, Karthikeyan S, Prabu M, Rajeswari N, Sanjeeviraja C |
| 1544 - 1549 |
Synthesis and electrochemical properties of hollow polyaniline microspheres by a sulfonated polystyrene template
Tan YT, Ran F, Wang LR, Kong LB, Kang L |
| 1550 - 1554 |
Fabrication of patterned PDLLA/PCL composite scaffold by electrospinning
Xu H, Cui WG, Chang J |
| 1555 - 1560 |
Physico-mechanical and decay resistance properties of chemically modified tropical wood material
Islam MS, Hamdan S, Hasan M, Rusop M, Rahman MR, Idrus MAMM |
| 1561 - 1568 |
MesoDyn simulation study on the phase morphologies of miktoarm PS-b-PMMA copolymer doped by nanoparticles
Mu D, Li JQ, Wang S |
| 1569 - 1577 |
Synthesis and characterization of poly(HEMA-co-MMA)-g-POSS nanocomposites by combination of reversible addition fragmentation chain transfer polymerization and click chemistry
Islam MR, Bach LG, Park JM, Hong SS, Lim KT |
| 1578 - 1584 |
Removal of nitro aromatic compounds and sulfite acid from distillate of 2,4,6-trinitrotoluene red water using modified porous polystyrene microspheres
Meng QQ, Song K, Zhao QL, Ye ZF |
| 1585 - 1594 |
Preparation of PTT/clay nanocomposites with solid-state polymerized polytrimethylene terephthalate
Engelmann G, Bonatz E, Ganster J, Pinnow M, Bohn A |
| 1595 - 1600 |
New foamed plastic based on polyetherols obtained from 6-aminouracil, ethylene carbonate, and propylene oxide
Chmiel-Szukiewicz E |
| 1601 - 1608 |
Preparation and characterization of positively charged composite nanofiltration membranes by coating poly(ether ether ketone) containing quaternary ammonium groups on polysulfone ultrafiltration membranes
Wang J, Wang JH, Wang HF, Zhang SB |
| 1609 - 1614 |
LbL-coated microcapsules as systems for encapsulation of optical brightening agent
Tripathy J, Raichur AM |
| 1615 - 1622 |
Preparation and some properties of stereocomplex-type poly(lactic acid)/layered silicate nanocomposites
Furuhashi Y, Morioka K, Tamegai H, Yoshie N |
| 1623 - 1629 |
Rigid polyurethane foams made from high viscosity soy-polyols
Fan HY, Tekeei A, Suppes GJ, Hsieh FH |
| 1630 - 1636 |
Radiation degradation of microcrystalline cellulose in solid status
Sun J, Xu L, Ge MY, Zhai ML |
| 1637 - 1642 |
Permeation resistance of poly(ether ether ketone) to hydrogen, nitrogen, and oxygen gases
Monson L, Moon SI, Extrand CW |
| 1643 - 1652 |
Surface graft polymerization of conducting polyaniline on waterborne poyurethane-urea film and its phenol sensing
Son SJ, Kim HS, Lee DJ, Lee YH, Kim HD |
| 1653 - 1658 |
Synthesis and characterization of nanosilica ball-PMMA hybrid composites
Kim HC, Noh SM, Park SK |
| 1659 - 1666 |
Modeling, prediction, and multifactorial optimization of radiation-induced grafting of 4-vinylpyridine onto poly(vinylidene fluoride) films using statistical simulator
Nasef MM, Shamsaei E, Ghassemi P, Aly AA, Yahaya AH |
| 1667 - 1675 |
Determining the mechanical properties of epoxy resin (DGEBA) composites by ultrasonic velocity measurement
Oral I, Guzel H, Ahmetli G |
| 1676 - 1682 |
Synthesis and properties of crosslinked poly(arylene ether nitriles) containing pendant phthalonitrile
Yang J, Yang XL, Zhan YQ, Zou YK, Zhao R, Liu XB |
| 1683 - 1690 |
Preparation and characterization of new flame retardant polyurethane composite and nanocomposite
Aslzadeh MM, Abdouss M, Sadeghi GMM |
| 1691 - 1696 |
Ring-opening metathesis polymerization of bicyclo[2.2.1]hepta-2,5-diene (norbornadiene) initiated by new ruthenium(II) complex
Yalcinkaya EE, Dayan O, Balcan M, Guler C |
| 1697 - 1702 |
Thermal conductivity of poly vinylidene fluoride composites filled with expanded graphite and carbon nanotubes
Shou QL, Cheng JP, Fang JH, Lu FH, Zhao JJ, Tao XY, Liu F, Zhang XB |
| 1703 - 1710 |
Effect of kraft lignin on protein aggregation, functional, and rheological properties of fish protein-based material
Sakunkittiyut Y, Kunanopparat T, Menut P, Siriwattanayotin S |
| 1711 - 1716 |
Bifunctional initiators on the polymerization of vinyl acetate
Galhardo E, Franco CM, Lona LMF |
| 1717 - 1724 |
Preparation and performance of high refractive index silicone resin-type materials for the packaging of light-emitting diodes
Yang XF, Shao Q, Yang LL, Zhu XB, Hua XL, Zheng QL, Song GX, Lai GQ |
| 1725 - 1729 |
Low methoxylated pectin for preparation of an intelligent functional sheet with responsiveness to sodium ions
Ichiura H, Matsuike T, Ohtani Y |
| 1730 - 1736 |
Study on high-solid content Si/PU polyurethane dispersion with PES/PPG composite soft segment
Zhang FX, Wei XL, Xiao ZL |
| 1737 - 1743 |
Study on the biocomposites with poly(ethylene glycol) dimethacrylate and surfaced-grafted hydroxyapatite nanoparticles
Li HB, Fu Y, Niu R, Zhou ZY, Nie J, Yang DZ |
| 1744 - 1750 |
Surface modification of polycaprolactone monofilament by low pressure oxygen plasma
Gupta B, Krishnanand K, Deopura BL, Atthoff B |
| 1751 - 1757 |
A study on thermal behavior of a poly(VDF-CTFE) copolymers binder for high energy materials
Singh A, Soni PK, Shekharam T, Srivastava A |
| 1758 - 1764 |
Functionalization of polymer-supported pentaerythritol as a general synthesis for the preparation of ion-binding polymers
Alexandratos SD, Zhu XP |
| 1765 - 1771 |
Adsorption characteristics of tannic acid onto the novel protonated palygorskite/chitosan resin microspheres
Wu J, Chen J |
| 1772 - 1780 |
Effect of the sol fraction and hydrostatic deformation on the viscoelastic behavior of prestrained highly filled elastomers
Azoug A, Constantinescu A, Pradeilles-Duval RM, Vallat MF, Neviere R, Haidar B |
| 1781 - 1793 |
New amphiphilic sulfonic acid dopant-cum-templates for diverse conducting polyaniline nanomaterials
Shinde SD, Jayakannan M |
| 1794 - 1802 |
Photochromic behavior of naphthopyran in styrene-butadiene-styrene elastomer thin films: Effect of stretching of film and linker
Zhao XC, Wang G, Zhang K |
| 1803 - 1811 |
Diffusivity of alcohols in amorphous polystyrene
Bernardo G |
| 1812 - 1826 |
Fundamental thermo-mechanical property modeling of triglyceride-based thermosetting resins
La Scala J, Wool RP |
| 1827 - 1833 |
Effect of interfacial chemistry on the linear rheology and thermal stability of poly(arylene ether nitrile) nanocomposite films filled with various functionalized graphite nanoplates
Zhan YQ, Meng FB, Yang XL, Wei JJ, Yang J, Zou YK, Guo H, Zhao R, Liu XB |
| 1834 - 1841 |
Synthesis of crosslinkable fluorinated linear-hyperbranched copolyimides for optical waveguide devices
Liu Y, Yao HY, Zhang YH, Zhang HB, Mu JX, Jiang ZH, Guan SW |
| 1842 - 1847 |
Thermal degradation behaviors and flame retardancy of epoxy resins with novel silicon-containing flame retardant
Gao M, Wu WH, Xu ZQ |
| 1848 - 1852 |
The physical properties of nonionic waterborne polyurethane with a polyether as side chain
Li B, Peng D, Zhao N, Mu QH, Li JH |
| 1853 - 1862 |
Short polyaniline nanorod prepared in the presence of para-phenylenediamine
Chao L, Ho KS, Shen SY, Pu HY, Hsieh TH, Kuo CW, Tseng BH |
| 1863 - 1872 |
Biolignin (TM) based epoxy resins
Delmas GH, Benjelloun-Mlayah B, Le Bigot Y, Delmas M |
| 1873 - 1884 |
Covalent immobilization of beta-galactosidase onto electrospun nanofibers of poly (AN-co-MMA) copolymer
El-Aassar MR, Al-Deyab SS, Kenawy ER |
| 1885 - 1894 |
Fabrication and characterization of poly(vinyl alcohol)/graphene oxide nanofibrous biocomposite scaffolds
Qi YY, Tai ZX, Sun DF, Chen JT, Ma HB, Yan XB, Liu B, Xue QJ |
| 1895 - 1900 |
Study on reaction kinetics of epoxy resin cured by a modified dicyandiamide
Feng LB, Wang YL, Wang YP, Liu H, Zhao JC |
| 1901 - 1908 |
Electrospinning of thermoplastic polyurethane microfibers and nanofibers from polymer solution and melt
Dasdemir M, Topalbekiroglu M, Demir A |
| 1909 - 1920 |
Nucleation effect of surface treated TiO2 on Poly(trimethylene terephthalate) (PTT) nanocomposites
Ramesh V, Mohanty S, Panda BP, Nayak SK |
| 1921 - 1928 |
Green composites using switchgrass as a reinforcement for a conjugated linseed oil-based resin
Pfister DP, Larock RC |
| 1929 - 1936 |
Synthesis of bio-based polyurethanes from epoxidized soybean oil and isopropanolamine
Miao SD, Zhang SP, Su ZG, Wang P |
| 1937 - 1950 |
Microstructure elucidation of polyflavonoid tannins by MALDI-TOF-CID
Radebe N, Rode K, Pizzi A, Pasch H |
| 1951 - 1958 |
Properties and antimicrobial activities of starch-sodium alginate composite films incorporated with sodium dehydroacetate or rosemary extract
Yan QQ, Zhang JL, Dong HZ, Hou HX, Guo P |
| 1959 - 1966 |
Experimental characterization of a curing thermoset epoxy-anhydride systemu-Isothermal and nonisothermal cure kinetics
Huang XS, Patham B |
| 1967 - 1973 |
Microcellular extrusion of PLA utilizing solid-state nucleation in the gas-saturated pellet extrusion process
Miller D, Kumar V |
| 1974 - 1980 |
Synthesis, characterization, and swelling behavior of new pH-sensitive hydrogels derived from copolymers of 2-hydroxyethyl methacrylate and 2-(diisopropylamino)ethylmethacrylate
Faccia PA, Amalvy JI |
| 1981 - 1988 |
In situ crosslinkable sulfonated polyaromatic ionomers for the polyelectrolyte used in proton exchange membrane fuel cell
Wang SJ, Chen Y, Xiao M, Meng YZ |
| 1989 - 1996 |
Solid-state hydrolysis of postconsumer polyethylene terephthalate after plasma treatment
Mancini SD, Nogueira AR, Rangel EC, da Cruz NC |
| 1997 - 2003 |
The effect of citrate ester plasticizers on the thermal and mechanical properties of poly(DL-lactide)
Harte I, Birkinshaw C, Jones E, Kennedy J, DeBarra E |
| 2004 - 2009 |
Synthesis of magnesium hydroxide nanofiller and its use for improving thermal properties of new poly(ether-amide)
Shabanian M, Ghanbari D |
| 2010 - 2018 |
Variation of lexan polycarbonate properties by electron beam
Hareesh K, Ranganathaiah C, Ramya P, Bhargavi R, Nair GG, Sangappa, Sanjeev G |
| 2019 - 2024 |
Copolymer-induced silk-based hydrogel with porous and nanofibrous structure
Zhong TY, Xie ZG, Deng CM, Chen M, Gao YF, Zuo BQ |
| 2025 - 2032 |
Interior synthesizing of ZnO nanoflakes inside nylon-6 electrospun nanofibers
Panthi G, Barakat NAM, Al-Deyab SS, El-Newehy M, Pandeya DR, Kim HY |
| 2033 - 2037 |
A novel method to graft carbon nanotube onto carbon fiber by the use of a binder
Rong HP, Han KQ, Li S, Tian YC, Muhuoyu |
| 2038 - 2045 |
Ternary elastomer nanocomposites based on NR/BR/SBR: Effect of nanoclay composition
Zarei M, Naderi G, Bakhshandeh GR, Shokoohi S |
| 2046 - 2056 |
The effect of pH on the hydrolytic degradation of poly(epsilon-caprolactone)-block-poly(ethylene glycol) copolymers
Loh XJ |
| 2057 - 2066 |
Synthesis and applications of oligoetherols with perhydro-1,3,5-triazine ring and boron
Lubczak J, Lukasiewicz B, Mysliwiec B |
| 2067 - 2073 |
Preparation and properties of porous L-tryptophan imprinted latex membrane from core-shell emulsion
Lin MN, Li X, Zhang WY, Ying XG |
| 2074 - 2081 |
Synthesis of epoxy resin-silica nanocomposites provided from perhydropolysilazane as a curing reagent and the precursor of silica domain
Saito R, Fujii Y, Kumagai T |
| 2082 - 2094 |
Synthesis of a novel amphoteric chelating polymer flocculant and its performance in Cu2+ removal
Liu LH, Wu J, Ling YL, Li X, Zeng RJ |
| 2095 - 2101 |
Synergistic effect of organic silicon on the flame retardancy and thermal properties of polycarbonate/potassium-4-(phenylsulfonyl) benzenesulfonate systems
Yuan DD, Deng LT, Yin HQ, Cai XF |
| 2102 - 2109 |
Preparation, identification, and evaluation of PEGylated puerarin
Liu X, Ding ZS, Jiang FS, Ding XH, Jin B, Chen SH, Lv GY |
| 2110 - 2115 |
Preparation and potential in vivo anti-influenza virus activity of low molecular-weight kappa-carrageenans and their derivatives
Tang FX, Chen F, Li F |
| 2116 - 2120 |
Synthesis of random or tapered solution styrene-butadiene copolymers in the presence of sodium dodecylbenzene sulfonate as a polar modifier
Halasa AF, Jasiunas C, Hsu B, Henning S, Seo KS |
| 2121 - 2131 |
New insights in dispersion mechanisms of carbon black in a polymer matrix under shear by rheo-optics
Collin V, Boudimbou I, Peuvrel-Disdier E |
| 2132 - 2139 |
Poly(epsilon-caprolactone) composites containing gentamicin-loaded beta-tricalcium phosphate/gelatin microspheres as bone tissue supports
Sezer UA, Aksoy EA, Hasirci V, Hasirci N |
| 2140 - 2151 |
Novel polymer electrolyte membranes based on semi-interpenetrating blends of poly(vinyl alcohol) and sulfonated poly(ether ether ketone)
Kanakasabai P, Deshpande AP, Varughese S |
| 2152 - 2159 |
Fabrication and In Vitro investigation of nanohydroxyapatite, chitosan, poly(L-lactic acid) ternary biocomposite
Zhang CY, Zhang CL, Wang JF, Lu CH, Zhuang Z, Wang XP, Fang QF |
| 2160 - 2168 |
Selective binding of an imprinted polymer resulted from controlling cobalt coordination to nitric oxide
Zhao LL, Chen CB, Zhou J |
| 2169 - 2175 |
The effect of curing cycles on curing reactions and properties of a ternary system based on benzoxazine, epoxy resin, and imidazole
Wang HY, Zhao P, Ling H, Ran QC, Gu Y |
| 2176 - 2183 |
A recycling model of excess toluene diisocyanate isomers in the preparation of polyurethane prepolymer
He Y, Zhang XY, Zhang XF, Huang H, Chang J, Chen HQ |
| 2184 - 2191 |
Preparation and properties of kapok fiber enhanced oil sorption resins by suspended emulsion polymerization
Wang JT, Zheng Y, Wang AQ |
| 2192 - 2200 |
Influence of compatibilizer content on PA/NBR blends properties: Unusual characterization and evaluation methods
Gomes ACO, Soares BG, Oliveira MG, Pessan LA, Paranhos CM |
| 2201 - 2212 |
Dispersion of nanoclays with poly(ethylene terephthalate) by melt blending and solid state polymerization
Kim SG, Lofgren EA, Jabarin SA |
| 2213 - 2219 |
Influence of natural and accelerated weathering on performances of photoselective greenhouse films
Russo P, Acierno D, Marinucci L, Greco A, Frigione M |
| 2220 - 2226 |
Thermal, crystalline, and tribological properties of PEEK/PEI/PES plastics alloys
Chen JB, Guo Q, Zhao ZP, Shao XL, Wang XM, Duan CL |
| 2227 - 2234 |
Electromagnetic wave shielding and microwave absorbing properties of hybrid epoxy resin/foliated graphite nanocomposites
Al-Ghamdi AA, Al-Hartomy OA, Al-Solamy F, Al-Ghamdi AA, El-Tantawy F |
| 2235 - 2242 |
Simultaneous interpenetrating network silicone hydrogels prepared by free radical/cationic hybrid polymerization
Wang JJ, Liu F |
| 2243 - 2250 |
Novel nanocomposite of poly(acrylonitrile-co-glycidyl methacrylate) crosslinked with Jeffamine-functionalized multiwalled carbon nanotubes as gel polymer electrolytes
Li Y, Luo D, Yang MJ |
| 2251 - 2258 |
Adsorption of anionic dyes on a reversibly swelling cationic superabsorbent polymer
Shukla NB, Madras G |
| 2259 - 2268 |
Nerve guidance channels based on PLLA-PTMC biomaterial
Wach RA, Adamus A, Olejnik AK, Dzierzawska J, Rosiak JM |
| 2269 - 2279 |
Superporous collagen-sericin scaffolds
Lungu A, Albu MG, Stancu IC, Florea NM, Vasile E, Iovu H |
| 2280 - 2289 |
Vinyl-addition type norbornene copolymer containing sulfonated biphenyl pendant groups for proton exchange membranes
Chen L, Wang XF, He XH, Liu SF, Chen YW, Zhou WH |
| 2290 - 2306 |
Elongational rheology of biodegradable poly(lactic acid)/poly[(butylene succinate)-co-adipate] binary blends and poly(lactic acid)/poly[(butylene succinate)-co-adipate]/clay ternary nanocomposites
Eslami H, Kamal MR |
| 2307 - 2313 |
Periodic crazing on polymethylmethacrylate film by localized bending
Naito K, Takeno A, Miwa M |
| 2314 - 2324 |
Melt processing and characterization of polyvinyl alcohol and polyhydroxyalkanoate multilayer films
Thellen C, Cheney S, Ratto JA |
| 2325 - 2331 |
Synthesis and characterization of a magnetic hybrid material consisting of iron oxide in a carboxymethyl cellulose matrix
Luna-Martinez JF, Reyes-Melo E, Gonzalez-Gonzalez V, Guerrero-Salazar C, Torres-Castro A, Sepulveda-Guzman S |
| 2332 - 2338 |
Influence of oxygen on the stabilization reaction of polyacrylonitrile fibers
Xiao SJ, Wang B, Zhao C, Xu LH, Chen BH |
| 2339 - 2353 |
Toughening of unmodified polyvinylchloride through the addition of nanoparticulate calcium carbonate and titanate coupling agent
Kemal I, Whittle A, Burford R, Vodenitcharova T, Hoffman M |
| 2354 - 2361 |
Humidity and wetting effects in spin-cast blends of insulating polymers and conducting polyaniline doped with DBSA
Haberko J, Bernasik A, Luzny W, Hasik M, Raczkowska J, Rysz J, Budkowski A |
