| 1375 - 1387 |
One-pot synthesis of polymeric bead bearing surface charge
Kusuktham B, Srikulkit K |
| 1388 - 1391 |
Studies of polypropylene-intumescent flame-retardant composites based on etched polypropylene as a coupling agent
Ma ZL, Gao JG, Bai LG |
| 1392 - 1396 |
Thermal oxidation of self-degradable composite films based on low-density polyethylene
Ol'khov AA, Shibryaeva LS, Lordanskii AL, Zaikov GE |
| 1397 - 1412 |
Bulk polymerization of styrene in the presence of polybutadiene: Effect of initiator type and prepolymerization conditions on particle morphology
Soto G, Nava E, Rosas M, Fuenmayor M, Gonzalez IM, Meira GR, Oliva HM |
| 1413 - 1421 |
Polyester binders for wood containing benzotriazole and HALS light stabilizers
Sundell P, Sundholm F |
| 1422 - 1425 |
Reduced copper diffusion in layered silicate/fluorinated polyimide (6FDA-ODA) nanocomposites
Jiang LY, Wei KH |
| 1426 - 1431 |
Rheological properties of water solutions of syndiotactic poly(vinyl alcohol) of different molecular weights
Kim SS, Seo IS, Yeum JH, Ji BC, Kim JH, Kwak JW, Yoon WS, Noh SK, Lyoo WS |
| 1432 - 1436 |
Design of organic electroluminescent displays with ultraviolet-shielding filters
Lee RH, Huang CY, Chen CT |
| 1437 - 1448 |
Dynamically cured polypropylene/epoxy blends
Jiang XL, Huang H, Zhang Y, Zhang YX |
| 1449 - 1453 |
Nylon 6 microfiber prepared by carbon dioxide laser heating
Suzuki A, Kamata K |
| 1454 - 1458 |
Nylon 6 microfiber obtained method with a carbon dioxide laser
Suzuki A, Kamata K |
| 1459 - 1466 |
Hyperbranched conjugated polymers for photovoltaic applications
Qiao J, Yang CH, He QG, Bai FL, Li YF |
| 1467 - 1472 |
Characterization of the water state of hyaluronic acid and poly(vinyl alcohol) interpenetrating polymer networks
Kim SJ, Lee CK, Kim SI |
| 1473 - 1477 |
Electrostimulus responsive behavior of poly(acrylic acid)/polyacrylonitrile semi-interpenetrating polymer network hydrogels
Kim SJ, Lee KJ, Kim SI |
| 1478 - 1485 |
Preparation of novel semihomogeneous cation-permeable membranes from blends of sulfonated poly(phenylene sulfide) and sulfonated phenolphthalein poly(ether ether ketone)
Hu KY, Xu TW, Fu YX, Yang WH |
| 1486 - 1492 |
Surface modification of silicone rubber with poly(ethylene glycol) hydrogel coatings
Vladkova T |
| 1493 - 1500 |
Study on the mechanical properties of hybrid reinforced rigid polyurethane composite foam
Yang ZG, Zhao B, Qin SL, Hu ZF, Jin ZK, Wang JH |
| 1501 - 1509 |
Synthesis of functionalized phenolformaldehyde polymer resins by the reaction of 2,4-dihydroxyacetophenone formaldehyde resin with various amines and their metal ion uptake properties
Reddy AR, Reddy KH |
| 1510 - 1515 |
Sorbents for removal surfactants from aqueous solutions: Surface modification of natural solids to enhance sorption ability
Lukaszczyk J, Lekawska E, Lunkwitz K, Petzold G |
| 1516 - 1520 |
Synthesis of new soluble aromatic poly(amide imide)s from unsymmetrical extended diamine containing phthalazinone moiety
Cheng L, Jian XG |
| 1521 - 1526 |
Processing thermal stability and degradation kinetics of poly(vinyl chloride)/montmorillonite composites
Wan CY, Tian GH, Cui N, Zhang YX, Zhang Y |
| 1527 - 1533 |
Studies on gamma-Fe2O3-high-density polyethylene composites and their additives
Govindaraj B, Sastry NV, Venkataraman A |
| 1534 - 1539 |
Isotactic polypropylene microfiber prepared by carbon dioxide laser-heating
Suzuki A, Narusue S |
| 1540 - 1547 |
Synthesis and characterization of spinning poly(acrylonitrile-co-silk fibroin peptide)s
Chen ZM, Suzuki M, Kimura M, Kondo Y, Hanabusa K, Shirai H |
| 1548 - 1552 |
Rod-climbing characteristics of alpha-Fe2O3 suspended polyisobutylene/polybutene solution
Lim ST, Choi HJ, Jhon MS |
| 1553 - 1558 |
Novel model for uniaxial strain-rate-dependent stress-strain behavior of ethylene-propylene-diene monomer rubber in compression or tension
Song B, Chen WN, Cheng M |
| 1559 - 1561 |
Partially miscible blends based on a polyarylate and poly(trimethylene terephthalate)
Guerrica-Echevarria G, Eguiazabal JI, Nazabal J |
| 1562 - 1568 |
Study of the miscibility and crystallization behavior of poly(ethylene oxide)/poly(vinyl alcohol) blends
Lai WC, Liau WB |
| 1569 - 1575 |
Grafting of polyacrylonitrile onto guar gum under microwave irradiation
Singh V, Tiwari A, Tripathi DN, Sanghi R |
| 1576 - 1583 |
Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines
Ramirez C, Vilarino JML, Abad MJ, Barral L, Bouza R, Cano J, Diez FJ, Garcia-Garabal S, Lopez J |
| 1584 - 1588 |
Studies of adsorption properties of crosslinked chitosan for Vanadium(V), Tungsten(VI)
Qian SH, Wang HY, Huang GQ, Mo SB, Wei W |
| 1589 - 1595 |
Surface grafting of polyacrylamide from polyethylene-based copolymer film
Luo N, Husson SM, Hirt DE, Schwark DW |
| 1596 - 1603 |
Studies on poly(acrylic acid)/attapulgite superabsorbent composite. I. Synthesis and characterization
Li A, Wang AQ, Chen JM |
| 1604 - 1610 |
Processing and chemorheology of epoxy resins and their blends with dendritic hyperbranched polymers
Ratna D, Varley R, Simon GP |
| 1611 - 1617 |
Preparation of positive-temperature coefficient heaters using platinum-catalyzed silicone rubber
Park ES, Yun SJ, Kim GT, Park IJ, Choi WH, Jeong JW, Hong SY, Park HW, Jang LW, Yoon JS |
| 1618 - 1624 |
Synthesis of superabsorbent resin by ultraviolet photopolymerization
Ruan WQ, Qiao JL, Huang YL, Niu AJ |
| 1625 - 1632 |
Preparation and properties of hydrophilic-hydrophobic chitosan derivatives
Yang H, Zhou SB, Deng XM |
| 1633 - 1645 |
Pseudo-first-order kinetic studies of the sorption of acid dyes onto chitosan
Wong YC, Szeto YS, Cheung WH, McKay G |
| 1646 - 1652 |
Syntheses and adsorption properties for Hg2+ of chelating resin of crosslinked polystyrene-supported 2,5-dimercapto-1,3,4-thiodiazole
Qu RJ, Wang CH, Sun CM, Ji CN, Cheng GX, Wang XQ, Xu G |
| 1653 - 1657 |
Thermal mechanical and dynamic mechanical property of biphenyl polyimide fibers
Zhang QH, Luo WQ, Gao LX, Chen DJ, Ding MX |
| 1658 - 1665 |
Use of pyrolysed oil shale as filler in poly(ethylene-co-vinyl alcohol)
Barbosa RV, Baumhardt-Neto R, Mauler RS, Jose C, Gorga P, Schneider CG |
| 1666 - 1671 |
Effect of molecular weight on brittle-to-ductile transition temperature of polyetherimide
Sanner MA, Haralur G, May A |
| 1672 - 1679 |
Modification of polystyrene by reactive extrusion with peroxide and trimethylolpropane triacrylate
Kim BK, Shon KH, Jeong HM |
| 1680 - 1687 |
Crystallization and melting behavior of 1,2-syndiotactic polybutadiene
Bertini F, Canetti M, Ricci G |
| 1688 - 1694 |
Surface modification of ethylene-co-acrylic acid copolymer films: Addition of amide groups by covalently bonded amino acid intermediates
Luo N, Stewart MJ, Hirt DE, Husson SM, Schwark DW |
| 1695 - 1701 |
Preparation of silane-terminated polystyrene and polymethylmethacrylate self-assembled films on silicon wafer
Zhou F, Liu WM, Xu T, Liu SJ, Chen M, Liu JX |
| 1702 - 1708 |
Structure and properties of polyamide 6 blends with low-density polyethylene grafted by itaconic acid and with neutralized carboxyl groups
Pesetskii SS, Krivoguz YM, Jurkowski B |
| 1709 - 1715 |
Preparation and characterization of sulfonated polyetherimide/polyetherimide blend membranes
Shen LQ, Xu ZK, Yang Q, Sun HL, Wang SY, Xu YY |
| 1716 - 1723 |
Preparation and characterization of starch/polycaprolactone blend
Kweon DK, Kawasaki N, Nakayama A, Aiba S |
| 1724 - 1730 |
Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds
Kotek R, Jung DW, Kim JH, Smith B, Guzman P, Schmidt B |
| 1731 - 1736 |
Electrical/pH responsive properties of poly(2-acrylamido-2-methylpropane sulfonic acid)/hyaluronic acid hydrogels
Kim SJ, Lee CK, Kim SI |
| 1737 - 1748 |
Thermal and thermooxidative degradation of engineering thermoplastics and life estimation
Gupta YN, Chakraborty A, Pandey GD, Setua DK |
| 1749 - 1757 |
In situ polymerization of titanium isopropoxide in polycaprolactone: Properties and characterization of the hybrid nanocomposites
Wu CS |
| 1758 - 1764 |
A governing equation for physical aging of thick and thin fluoropolyimide films
Zhou C, Chung TS, Wang R, Goh SH |
| 1765 - 1770 |
Study on the macrokinetics of poly(trimethylene terephthalate) polycondensation reaction
Chen KQ, Tang XZ, Chen SW, Fu G |
| 1771 - 1781 |
Interfacial effects in polypropylene-silica nanocomposites
Rong MZ, Zhang MQ, Pan SL, Friedrich K |
| 1782 - 1789 |
Morphological study of poly(vinylidene fluoride) asymmetric membranes: Effects of the solvent, additive, and dope temperature
Yeow ML, Liu YT, Li K |
| 1790 - 1803 |
Effect of water on the oxygen barrier properties of poly(ethylene terephthalate) and polylactide films
Auras R, Harte B, Selke S |
| 1804 - 1812 |
Water-swelling elastomer prepared by in situ formed lithium acrylate in chlorinated polyethylene
Ren WT, Peng ZL, Zhang Y, Zhang YX |
| 1813 - 1823 |
Effect of surfactant systems on the water sensitivity of latex films
Butler LN, Fellows CM, Gilbert RG |
| 1824 - 1833 |
Homopolymerization and copolymerization of tert-butyl methacrylate and norbornene with nickel-based methylaluminoxane catalysts
Huang CF, Wang SK, Kuo SW, Huang WJ, Chang FC |
| 1834 - 1839 |
The role of additives in the manufacture of sheets of unsaturated polyester and postconsumer unsaturated polyester/glass fiber composites: Mechanical and dynamic mechanical properties
Pedroso AG, Rosa DS, Atvars TDZ |
| 1840 - 1846 |
Synthesis and degradation behavior of poly(propylene carbonate) derived from carbon dioxide and propylene oxide
Du LC, Meng YZ, Wang SJ, Tjong SC |
| 1847 - 1854 |
H-1- and C-13-NMR analyses of aqueous polyamideamine-epichlorohydrin resin solutions
Obokata T, Isogai A |
| 1855 - 1862 |
Friction and wear studies on nylon-6/SiO2 nanocomposites
Garcia M, de Rooij M, Winnubst L, van Zyl WE, Verweij H |
| 1863 - 1868 |
Synthesis and chain extension of nitroxide-terminated styrene-maleimide copolymers
Lokaj J, Krakovsky I, Holler P, Hanykova L |
| 1869 - 1874 |
Properties of a few aromatic poly(thioether ketones) as sulfur-containing high-performance polymers
Matsumura S, Kihara N, Takata T |
| 1875 - 1886 |
Modeling of polyurethane foam formation
Tesser R, Di Serio M, Sclafani A, Santacesaria E |
| 1887 - 1892 |
Comparison between titanium tetrabutoxide and a new commercial titanium dioxide based catalyst used for the synthesis of poly(ethylene terephthalate)
Finelli L, Lorenzetti C, Messori M, Sisti L, Vannini M |
| 1893 - 1901 |
Pectin and polyacrylamide composite hydrogels: Effect of pectin on structural and dynamic mechanical properties
Liu LS, Cooke PH, Coffin DR, Fishman ML, Hicks KB |
| 1902 - 1914 |
Synthesis and characterization of statistical copolymers of styrene and 4-(1-hydroxyalkyl)styrene
Nasrullah JM, Dhamodharan R |
| 1915 - 1938 |
Effect of degree of polymerization on gelation and flow processability of poly(vinyl chloride)
Fujiyama M, Kondou M |
| 1939 - 1944 |
Electrochemical polymerization of beta-naphthalene sulfonic acid
Li EH, Huang ZM, Shi GQ, Qu LT, Zhang JX |
| 1945 - 1949 |
Gas phase polymerization of 1,3-butadiene with supported neodymium-based catalyst: Investigation of molecular weight
Ni XF, Li JF, Zhang YF, Shen ZQ |
| 1950 - 1954 |
Preparation and performance of aluminum borate whisker-reinforced epoxy composites. I. Effect of whiskers on processing, reactivity, and mechanical properties
Liang GZ, Hu XL |
| 1955 - 1960 |
Polymerization kinetics and thermal properties of dicyanate/clay nanocomposites
Kim DS, Lee KM |
| 1961 - 1969 |
Miniemulsion polymerization of styrene with polymeric costabilizers
Chern CS, Lin CH |
| 1970 - 1976 |
Effective enhancement of anticorrosive properties of polystyrene by polystyrene-clay nanocomposite materials
Yeh JM, Liou SJ, Lin CG, Chang YP, Yu YH, Cheng CF |
| 1977 - 1983 |
In situ atomic oxygen erosion study of fluoropolymer films using X-ray photoelectron spectroscopy
Gonzalez RI, Phillips SH, Hoflund GB |
| 1984 - 1992 |
Raman spectroscopic study of CdS, PVA composite films
Badr YA, El-Kader KMA, Khafagy RM |
| 1993 - 1999 |
Preparation and evaluation of chitosan-coated polyphosphazene hydrogel beads for drug controlled release
Qiu LY |
| 2000 - 2007 |
Silica-reinforced dynamically vulcanized ethylene-propylene-diene monomer/polypropylene thermoplastic elastomers: Morphology, rheology, and dynamic mechanical properties
Bazgir S, Katbab AA, Nazockdast H |
| 2008 - 2012 |
Effect of supercritical carbon dioxide dyeing conditions on the chemical and morphological changes of poly(ethylene terephthalate) fibers
Hou AQ, Xie KL, Dai JJ |
| 2013 - 2016 |
Preparation of silicon dioxide/polyurethane nanocomposites by a sol-gel process
Zhu Y, Sun DX |
| 2017 - 2022 |
Fundamental study of the effect of the fiber wall thickness and inner diameter on the structure of polyamide and polypropylene hollow fibers
Petrulis D |
| 2023 - 2029 |
Supercritical CO2 assisted processing of polystyrene/nylon 1212 blends and CO2-induced epitaxy on nylon 1212
Chang YN, Xu Q, Han BX, Wang YD, Liu MY, Zhao QX |
| 2030 - 2037 |
Synthesis and characterization of polyacrylamide grafted sodium alginate membranes for pervaporation separation of water plus isovrovanol mixtures
Toti US, Aminabhavi TM |
| 2038 - 2044 |
Preparation and properties of unsaturated polyester-montmorillonite intercalated hybrid
Zhang YH, Cai QY, Jiang ZJ, Gong KC |
| 2045 - 2053 |
Synthesis and characterization of polyurethane foam matrices for the support of granular adsorbent materials
Pinto ML, Pires J, Carvalho AP, Bordado JCM, de Carvalho MB |
| 2054 - 2062 |
Fiber formation and physical properties of chitosan fiber crosslinked by epichlorohydrin in a wet spinning system: The effect of the concentration of the crosslinking agent epichlorohydrin
Lee SH, Park SY, Choi JH |
