| 1001 - 1006 |
Effect of bound rubber on characteristics of highly filled styrene-butadiene rubber compounds with different types of carbon black
Choi SS |
| 1007 - 1011 |
Synthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradation
Rana PK, Swain SK, Sahoo PK |
| 1012 - 1020 |
A new approach for selective surface modification of fluoropolymers by remote plasmas
Park YW, Inagaki N |
| 1021 - 1030 |
Effect of processing method on surface and weathering characteristics of wood-flour/HDPE composites
Stark NM, Matuana LM, Clemons CM |
| 1031 - 1036 |
Conductivity of layer and matrix polyaniline-silver-copper composites by plasma
Cruz GJ, Palacios JC, Olayo MG, Morales J, Olayo R |
| 1037 - 1041 |
Antimicrobial finishing of wool fabrics using quaternary ammonium salts
Zhu P, Sun G |
| 1042 - 1052 |
Multizone circulating reactor modeling for gas-phase polymerization. I. Reactor modeling
Fernandes FAN, Lona LMF |
| 1053 - 1059 |
Multizone circulating reactor modeling for gas-phase polymerization. II. Reactor operating with gas barrier in the downer section
Fernandes FAN, Lona LMF |
| 1060 - 1064 |
Comparison of different foaming agents in making plywood glue
Luukko P, Nystrom M, Rainio J |
| 1065 - 1070 |
Effect of imidization conditions on the morphology of polyimide
Huang JW, Kang CC |
| 1071 - 1076 |
Heat transfer in poly(methyl acrylate) by photoacoustic measurements
Rajan MAJ, Vivekanandam TS, Ramakrishnan SK, Ramachandran K, Umapathy S |
| 1077 - 1088 |
Acrylic acid/vinyl acetate suspension copolymerizations. I. Partition coefficients for acrylic acid
Silva FM, Lima EL, Pinto JC |
| 1089 - 1096 |
A study on the biodegradability of polyethylene terephthalate fiber and diethylene glycol terephthalate
Zhang JF, Wang XC, Gong JX, Gu ZY |
| 1097 - 1101 |
Swelling behavior of polyelectrolyte complex hydrogels composed of chitosan and hyaluronic acid
Kim SJ, Lee KJ, Kim SI |
| 1102 - 1109 |
Effect of clay concentration on the oxygen permeability and optical properties of a modified poly(vinyl alcohol)
Grunlan JC, Grigorian A, Hamilton CB, Mehrabi AR |
| 1110 - 1117 |
Assessing organo-clay dispersion in polymer nanocomposites
Eckel DF, Balogh MP, Fasulo PD, Rodgers WR |
| 1118 - 1128 |
Application of different kinetic models to analyze the reaction rates of liquid crystalline homopolyesters
Al-Adwani H, Bishara AE, Al-Roomi Y, Mathew J, Shaban HI |
| 1129 - 1135 |
Rheological properties, oil, and thermal resistance in sulfur-cured CPE/NR blends
Sirisinha C, Saeoui P, Pattanawanidchai S |
| 1136 - 1150 |
Development of calibration models for estimation of monomer concentration by Raman spectroscopy during emulsion polymerization: Facing the medium heterogeneity
Reis MM, Araujo PHH, Sayer C, Giudici R |
| 1151 - 1156 |
Thermal properties of poly(vinyl alcohol)-solute blends studied by TMDSC
Stavropoulou A, Papadokostaki KG, Sanopoulou M |
| 1157 - 1165 |
Laser dye diffusion in polymer solutions studied by spectrophotometry
Marigoudar P, Lagare MT, Mallikarjuna NN, Aminabhavi TM |
| 1166 - 1174 |
Continuous ultrasonic devulcanization of unfilled butadiene rubber
Oh JS, Isayev AI |
| 1175 - 1178 |
Study on the morphology of the hydrophobically-modified polyelectroyte in aqueous solution by AFM measurements
Ye L, Huang RH, Hoffmann H, Wang C |
| 1179 - 1185 |
Comparison in processability and mechanical and thermal properties of ethylene-octene copolymer crosslinked by different techniques
Sirisinha K, Meksawat D |
| 1186 - 1191 |
Investigations on the reactive surface modification of polycarbonate by surface-reactive injection molding
Nagel J, Brauer M, Hupfer B, Grundke K, Schwarz S, Lehmann D |
| 1192 - 1197 |
The effects of varied imidization conditions on rubbed polyimide film surface morphology
Devlin CLH, Chiang S, Russell TP |
| 1198 - 1202 |
Polyimide-silica hybrid films made from polyamic acids containing phenolic hydroxyl groups
Huang Y, Qin JQ, Gu Y |
| 1203 - 1210 |
Nonisothermal crystallization, melting behavior, and morphology of polypropylene/metallocene-catalyzed polyethylene blends
Gao JG, Wang D, Yu MS, Yao ZH |
| 1211 - 1218 |
Adhesion property of sulfonated poly(arylene ether sulfone)s
Choi IJ, Ahn CJ, Yoon TH |
| 1219 - 1223 |
Effects of ozone and chlorine dioxide on the chemical properties of cellulose fibers
Lemeune S, Jameel H, Chang HM, Kadla JF |
| 1224 - 1229 |
Preparation of antimicrobial sutures by preirradiation grafting of acrylonitrile onto polypropylene monofilament. II. Mechanical, physical, and thermal characteristics
Jain R, Gupta B, Anjum N, Revagade N, Singh H |
| 1230 - 1235 |
Influence of LiClO4 on the thermal, mechanical, and morphological properties of P(DMS-co-EO)/P(EPI-co-EO) blends
Fonseca CP, Guedes CGF, Rosa DS, Neves S |
| 1236 - 1239 |
A kinetic investigation of the in situ polymerization of methyl methacrylate under supercritical fluid CO2 conditions using high-pressure DSC
Lu SY, Zhang ZY, Nawaby AV, Day M |
| 1240 - 1251 |
Polymeric phase change composites for thermal energy storage
Peng S, Fuchs A, Wirtz RA |
| 1252 - 1263 |
Synthetic clay nanocomposite-based coatings prepared by UV-cure photopolymerization
Shemper BS, Morizur JF, Alirol M, Domenech A, Hulin V, Mathias LJ |
| 1264 - 1270 |
Bithiazole-containing polymeric complex and PVA composite film: Preparation and magnetic properties
Lin CP, Sun WL, Jiang LM, Wang LQ, Shen ZQ |
| 1271 - 1284 |
On the application of a damped model to the falling weight impact characterization of glass beads-polystyrene composites
Sanchez-Soto M, Martinez AB, Santana OO, Gordillo A |
| 1285 - 1292 |
Process cure monitoring of unsaturated polyester resins, vinyl ester resins, and gel coats by Raman spectroscopy
Skrifvars M, Niemela P, Koskinen R, Hormi O |
| 1293 - 1298 |
Studies on the effect of titanate coupling agent (2.0%) on the mechanical properties of flyash-filled polybutadiene rubber
Alkadasi NAN, Sarwade BD, Hundiwale DG, Kapadi UR |
| 1299 - 1304 |
Effect of titanate coupling agent on the mechanical properties of clay-filled polybutadiene rubber
Alkadasi NAN, Kapadi UR, Hundiwale DG |
| 1305 - 1316 |
Film studies of certain new aromatic-aliphatic polyamides
Thayumanaswamy SM, Rajendran V |
| 1317 - 1325 |
Pulsed-plasma-polymerized aniline thin films
Tamirisa PA, Liddell KC, Pedrow PD, Osman MA |
| 1326 - 1328 |
Application of crosslinked chitosan in the analysis of butyl tin speciation
Wang ML, Qian SH, Mo SB, Huang GQ, Wang HY |
| 1329 - 1336 |
Nonlinear stress relaxation in palladium(II) complexes with triblock copolymers of styrene and butadiene
Das PK, Belfiore LA |
| 1337 - 1347 |
Drug complexation and physicochemical properties of vinylpyrrolidone-N,N'-dimethylacrylamide copolymers
de Queiroz AAA, Franca EJ, Abraham GA, San Roman J |
| 1348 - 1359 |
Dynamic mechanical thermal analysis of thermally stable and thermally reactive network polymers
Cook WD, Scott TF, Quay-Thevenon S, Forsythe JS |
| 1360 - 1371 |
Radiation synthesis of hydrogels to enhance sandy soils water retention and increase plant performance
Abd El-Rehim HA, Hegazy ESA, Abd El-Mohdy HL |
| 1372 - 1377 |
Simplified method for estimation of composition of alginates by FTIR
Sakugawa K, Ikeda A, Takemura A, Ono H |
| 1378 - 1383 |
Thermal degradation of ternary blends of poly(E-caprolactone)/poly(vinyl acetate)/poly(vinyl chloride)
Sivalingam G, Madras G |
| 1384 - 1393 |
Swelling behavior of PDMS-PMHS pervaporation membranes in ethyl acetate-water mixtures
Vilaplana F, Osorio-Galindo M, Iborra-Clar A, Alcaina-Miranda MI, Ribes-Greus A |
| 1394 - 1396 |
Gelation in the radical polymerization of dimethyl diallyl ammonium chloride
Kozlov GV, Malkanduev YA, Zaikov GE |
| 1397 - 1400 |
Natural rubber vulcanizate reinforced by modified coal-shale-based fillers
Zhao M, Xiang Y |
| 1401 - 1410 |
Synthesis and characterization of cellulose triacetate and poly(ethylene imine) membranes containing a polyether macrobicyclic: Their application to the separation of copper(II) and silver(I) ions
Arous O, Amara M, Kerdjoudj H |
| 1411 - 1422 |
Plasma-enhanced deposition of silver nanoparticles onto polymer and metal surfaces for the generation of antimicrobial characteristics
Jiang HQ, Manolache S, Wong ACL, Denes FS |
| 1423 - 1435 |
Effect of butyl rubber type on properties of polyamide and butyl rubber blends
Van Dyke JD, Gnatowski M, Koutsandreas A, Burczyk A |
| 1436 - 1445 |
Poly[poly(oxypropylene) phosphate] macroionophores for transport and separation of cations in a hybrid: Cation exchange polymer and liquid membrane system
Wodzki R, Swiatkowski M, Pretula J, Kaluzynski K |
| 1446 - 1453 |
Effects of maleated styrene-(ethylene-co-butene)-styrene on compatibilization and properties of Nylon-12,12/Nylon6 blends
Xie TX, Yang GS |
| 1454 - 1461 |
Synthesis and characterization of polyamphoteric hydrogel membrane based on chitosan
Gholap SG, Badiger MV |
| 1462 - 1472 |
Toughening of recycled poly(ethylene terephthalate) with a maleic anhydride grafted SEBS triblock copolymer
Yu ZZ, Yang MS, Dai SC, Mai YW |
| 1473 - 1483 |
UV-initiated free radical and cationic photopolymerizations of acrylate/ep oxide and acrylate/vinyl ether hybrid systems with and without photosensitizer
Cho JD, Hong JW |
| 1484 - 1492 |
Compositional analysis of thermoplastic wood composites by TGA
Renneckar S, Zink-Sharp AG, Ward TC, Glasser WG |
| 1493 - 1499 |
Solubility study of polyacrylamide in polar solvents
Wu SH, Shanks RA |
| 1500 - 1500 |
Rheological analysis of vapor-grown carbon nanofiber-reinforced polyethylene composites (vol 93, pg 155, 2004)
Lozano K, Yang SY, Zeng Q |
