| 1857 - 1866 |
Filled Polymers with High Nanoparticles Concentration-Synthesis and Properties
Burunkova JE, Denisyuk IY, Williams TR |
| 1867 - 1872 |
Mechanical Properties of Polypropylene Composite Reinforced with Oil Palm Empty Fruit Bunch Pulp
Tay GS, Zaim JM, Rozman HD |
| 1873 - 1878 |
Fibrous Membranes of Cellulose Acetate and Poly(vinyl pyrrolidone) by Electrospinning Method: Preparation and Characterization
Castillo-Ortega MM, Romero-Garcia J, Rodriguez F, Najera-Luna A, Herrera-Franco PJ |
| 1879 - 1888 |
Modeling the Fabrication Process of Micropatterned Macromolecular Scaffolds for Peripheral Nerve Regeneration
Sannino A, Silvestri L, Madaghiele M, Harley B, Yannas IV |
| 1889 - 1893 |
Synergistic Flame Retardant Effect of Cerium Oxide in Ethylene-Vinyl Acetate/Aluminum Hydroxide Blends
Jiao CM, Chen XL |
| 1894 - 1901 |
Carbon Nanotube-Hybridized Supramolecular Hydrogel Based on PEO-b-PPO-b-PEO/alpha-Cyclodextrin as a Potential Biomaterial
Hui ZY, Zhang XL, Yu JH, Huang J, Liang ZS, Wang DX, Huang HT, Xu PH |
| 1902 - 1912 |
Photoisomerization Behavior of Bisbenzylidene and 1,3,4-Oxadiazole-Based Liquid Crystalline Polyesters
Balamurugan R, Kannan P |
| 1913 - 1919 |
Poly(ethylene-2,6-naphthalate) Nanofiber Prepared by Carbon Dioxide Laser Supersonic Drawing
Suzuki A, Yamada Y |
| 1920 - 1928 |
Synthetic Amphoteric Copolymer as a Dispersant for Aqueous Barium Titanate Slurries
Chen LP, Chen WY, Hsu KC |
| 1929 - 1932 |
The Effect of Hydrolytic and Thermal Degradation on Mechanical Properties of Industrial Polyester Yarns
Sheikhzadeh N, Ghaeli I, Pirzadeh E, Bateni F |
| 1933 - 1939 |
Application of Mie Light Scattering to the Morphological Development of Polypropylene/Polystyrene Blends. I. Method for the Determination of Mie Scattering
Li YY, Yan D, Ma GQ, Yuan XB, Sheng J |
| 1940 - 1947 |
Influence of Temperature and Penetration Depth on Photopolymerization of n-Butyl Acrylate Using a Narrow Channel Reactor
Nekkanti V, Jachuck RJJ |
| 1948 - 1957 |
Surface Modification Effects of Core-Shell Rubber Particles on the Toughening of Poly(butylene terephthalate)
Yang H, Cho K |
| 1958 - 1966 |
Influence of Surface Morphology of the Kraft Pulp Fibers on the Growth of the Transcrystalline Layer of Polypropylene
Lee BG, Lee S, Via BK |
| 1967 - 1976 |
Preparation, Characterization, and Antibacterial Properties of Electrospun Polyacrylonitrile Fibrous Membranes Containing Silver Nanoparticles
Rujitanaroj PO, Pimpha N, Supaphol P |
| 1977 - 1984 |
Layered Double Hydroxide/NaSb(OH)(6)-Poly(vinyl chloride) Nanocomposites: Preparation, Characterization, and Thermal Stability
Chen XG, Wu DD, Lv SS, Zhang L, Ye Y, Cheng JP |
| 1985 - 1993 |
Thermosensitive PCL-PEG-PCL Hydrogels: Synthesis, Characterization, and Delivery of Proteins
Ma GL, Miao BL, Song CX |
| 1994 - 2004 |
Preparation of Microcellular Poly(ethylene-co-octene) Rubber Foam with Supercritical Carbon Dioxide
Zhai WT, Leung SN, Wang L, Naguib HE, Park CB |
| 2005 - 2014 |
Artificial and Natural Weathering of ABS
Santos RM, Botelho GL, Machado AV |
| 2015 - 2022 |
Rheological, Morphological, and Heat Seal Properties of Linear Low Density Polyethylene and Cyclo Olefine Copolymer (LLDPE/COC) Blends
Lamnawar K, Vion-Loisel F, Maazouz A |
| 2023 - 2028 |
Structure and Properties of PAN-Based Activated Carbon Hollow Fibers: Effect of Ammonium Dibasic Phosphate Pretreatment
Sun JF, He CJ, Wu LS |
| 2029 - 2034 |
Dramatic Improvement in Mechanical Properties of GNs-Reinforced HDPE Nanocomposites
Wang LW, Chen GH |
| 2035 - 2039 |
Conductivity and Piezoresistivity of Conductive Carbon Black Filled Polymer Composite
Wang P, Ding TH |
| 2040 - 2049 |
Novel Monocyclopentadienyl Zirconium and Hafnium Trialkoxide Complexes: Syntheses and Catalytic Properties for Olefin Polymerization
Hsiao TJ, Tsai JC |
| 2050 - 2057 |
Thermal and Mechanical Properties of Blends of Polylactide and Poly(ethylene glycol-co-propylene glycol): Influence of Annealing
Ran XH, Jia ZY, Han CY, Yang YM, Dong LS |
| 2058 - 2064 |
Thermal Stability of Poly(vinyl chloride)/Layered Double Hydroxide Nanocomposites
Liu J, Chen GM, Yang JP, Ding LP |
| 2065 - 2073 |
Synthesis and Properties of Copolymer Epoxy Resins Prepared from Copolymerization of Bisphenol A, Epichlorohydrin, and Liquefied Dendrocalamus latiflorus
Wu CC, Lee WJ |
| 2074 - 2082 |
Preparation of New Water-Soluble Chitosan Containing Hyperbranched-Vinylsulfonic Acid Sodium Salt and Their Antimicrobial Activities and Chelation with Metals
Chanthateyanonth R, Ruchirawat S, Srisitthiratkul C |
| 2083 - 2094 |
Preparation, Characterization, and In Vitro Application of Composite Films Based on Gelatin and Collagen from Natural Resources
Haroun AA, Beherei HH, Abd El-Ghaffar MA |
| 2095 - 2100 |
The Preparation and Thermodynamic Behaviors of Chlorosulfonated Polyethylene
Wang Z, Ni HZ, Bian YL, Zhang MY, Zhang HX |
| 2101 - 2109 |
Effects of Organo-Clay Modifier on Physical-Mechanical Properties of Butyl-Based Rubber Nano-Composites
Samadi A, Kashani MR |
| 2110 - 2118 |
Graphite Carbon Foam Films Prepared from Porous Polyimide with In Situ Formed Catalytic Nickel Particles
Luo YL, Chen QY, Zhu D, Matsuo M |
| 2119 - 2125 |
Nonisothermal Crystallization Kinetics of Modified Bamboo Fiber/PCL Composites
Huang YY, Liu HX, He PS, Yuan L, Xiong HG, Xu YM, Yu Y |
| 2126 - 2132 |
Fabrication and Apparent Kinetic Study of Poly(methyl methacrylate)/Poly(octyl acrylate) and Poly(octyl acrylate)/Poly(methyl methacrylate) Latex Interpenetrating Polymer Networks
Tang EJ, Zhao Y, Li GT |
| 2133 - 2142 |
Investigating the Micellization Behavior of Cetyltrimethylammonium Bromide: As Affected by the Contents of Poly(ethylene oxide) and Temperature of the System
Baloch MK, Rauf A, Ahmad F, Durani GF, Hameed G |
| 2143 - 2150 |
The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids
Xiao DL, Zhao XY, Feng YP, Xiang P, Zhang LQ, Wang WM |
| 2151 - 2156 |
The Novel Alginate/N-Succinyl-Chitosan Antibacterial Blend Fibers
Fan LH, Yu L, Xu YM, Yi CH, Cai J, Li M, Huang J |
| 2157 - 2165 |
Synthesis, Thermal Degradation, and Flame Retardance of Novel Triazine Ring-Containing Macromolecules for Intumescent Flame Retardant Polypropylene
Dai JF, Li B |
| 2166 - 2173 |
The Water Vapor Sorption Behavior of Flax Fibers-Analysis Using the Parallel Exponential Kinetics Model and Determination of the Activation Energies of Sorption
Hill CAS, Norton A, Newman G |
| 2174 - 2180 |
Effect of Protein-Loading on Properties of Wet-Spun Poly(L,D-lactide) Multifilament Fibers
Rissanen M, Puolakka A, Ahola N, Tonry A, Rochev Y, Kellomaki M, Nousiainen P |
| 2181 - 2187 |
Electrospun Ultrathin Nylon Fibers for Protective Applications
Vitchuli N, Shi Q, Nowak J, McCord M, Bourham M, Zhang XW |
| 2188 - 2196 |
Encapsulation of Palladium Nanoparticles by Multiwall Carbon Nanotubes-graft-Poly(citric acid) Hybrid Materials
Adeli M, Mehdipour E, Bavadi M |
| 2197 - 2204 |
Transparent Magnesium Hydroxide/Acrylate Nanocomposite Films
Wriedt S, Kaskel S |
| 2205 - 2215 |
Performance of a Newly Developed Hydrophilic Additive Blended with Different Ultrafiltration Base Polymers
Dang HT, Amelot C, Rana D, Narbaitz RM, Matsuura T |
| 2216 - 2226 |
The Effect of pH and Temperature on the Dye Sorption of Wool Powders
Wen G, Cookson PG, Liu X, Wang XG |
| 2227 - 2233 |
Interfacial Properties of Chitosan and Nonylphenol Polyoxyethylene Ether
Huang SM, Hwang JJ, Lin LH, Liu HJ, Yeh TC |
| 2234 - 2241 |
Preparation and Characterization of Microcapsules Containing Capsaicin
Wang JC, Chen SH |
| 2242 - 2250 |
Anisotropic In Vitro Vessel Model Using Poly(vinyl Alcohol) Hydro Gel and Mesh Material
Liu L, Kosukegawa H, Ohta M, Hayase T |
| 2251 - 2259 |
Asymmetric Cellulose Acetate Dialysis Membranes: Synthesis, Characterization, and Performance
Saljoughi E, Amirilargani M, Mohammadi T |
| 2260 - 2268 |
Halogen-Free Flame-Retardant Rigid Polyurethane Foams: Effect of Alumina Trihydrate and Triphenylphosphate on the Properties of Polyurethane Foams
Thirumal M, Singha NK, Khastgir D, Manjunath BS, Naik YP |
| 2269 - 2274 |
Degradation of Poly(butylene terephthalate) in Different Supercritical Alcohol Solvents
Yang JH, Huang J, Chyu MK, Wang QM, Xiong DL, Zhu ZB |
| 2275 - 2284 |
Molecular Dynamics Study of TiO2/Poly(acrylic acid-co-methyl methacrylate) and Fe3O4/Polystyrene Composite Latex Particles Prepared by Heterocoagulation
Luo YD, Chen JH, Huang CI, Chiu WY |
| 2285 - 2297 |
Reactions of Low Molecular Weight Highly Functionalized Maleic Anhydride Grafted Polyethylene with Polyetherdiamines
Hameed T, Potter DK, Takacs E |
| 2298 - 2304 |
Architecture of Prototype Copolymer Brushes Composed of Alternating Structure and Intramolecular Phase Separation of Side Chains in Solution
Ishizu K, Furuta Y, Nojima S, Uchida S |
| 2305 - 2311 |
Properties of Compatibilized Polylactide Blend Films with Gelatinized Corn and Tapioca Starches
Phetwarotai W, Potiyaraj P, Aht-Ong D |
| 2312 - 2319 |
Evaluation of Mechanical Properties of Polypropylene/Polycarbonate/SEBS Ternary Polymer Blends Using Taguchi Experimental Analysis
Jazani OM, Arefazar A, Saeb MR, Ghaemi A |
| 2320 - 2327 |
Rheological Evaluation of the Isothermal Cure Characteristics of Medical Grade Silicone Elastomers
McConville C, Andrews GP, Laverty TP, Woolfson AD, Malcolm RK |
| 2328 - 2335 |
Rheological Behavior of Polymer-Clay Nanocomposite Hydrogels: Effect of Nanoscale Interactions
Abdurrahmanoglu S, Okay O |
| 2336 - 2342 |
Preparation and Characterization of Thermally Conductive Polystyrene/Carbon Nanotubes Composites
Tu HM, Ye L |
| 2343 - 2347 |
Applicability of Nanofiltration for the Advanced Treatment of Landfill Leachate
Li GD, Wang W, Du QY |
| 2348 - 2358 |
A Study of Critical Processing Technologies of Liquid Crystal Polymer Printed Circuit Board for High Speed Application
Yung KC, Liem H, Choy H, Yue TM |
| 2359 - 2365 |
Measurement of the Solubility and Diffusivity of Blowing Agents in Polystyrene
Perez-Blanco M, Hammons JR, Danner RP |
| 2366 - 2373 |
Using Hop Bines as Reinforcements for Lightweight Polypropylene Composites
Zou Y, Reddy N, Yang YQ |
| 2374 - 2383 |
Structure and Properties of Polyethylene Ionomer Based Nanocomposites
Santamaria P, Eguiazabal JI, Nazabal J |
| 2384 - 2395 |
Synthesis and Characterization of Fluorine-Containing Liquid Crystalline Polysiloxanes Bearing Cholesteryl Cinnamate Mesogens and Trifluoromethyl-Substituted Mesogens
Meng FB, Wang ZY, Chai GW, Wang HG, Chen Y, Zhang BY |
| 2396 - 2408 |
Macroscopic N-Halamine Biocidal Polymeric Beads
Ahmed AESI, Hay JN, Bushell ME, Wardell JN, Cavalli G |
| 2409 - 2417 |
Fabrication of Water-Stable Electrospun Polyacrylic Acid-Based Nanofibrous Mats for Removal of Copper (II) Ions in Aqueous Solution
Xiao SL, Shen MW, Ma H, Guo R, Zhu MF, Wang SY, Shi XY |
| 2418 - 2424 |
Photoactive Antimicrobial PVA Hydrogel Prepared by Freeze-Thawing Process for Wound Dressing
Hong KH, Sun G |
| 2425 - 2432 |
Gas Phase Sensors for Bases Using Rhodamine B in Nafion Films
Hwang E, Levitsky IA, Euler WB |
| 2433 - 2440 |
A Simple One-Step Synthesis and Polymerization of Plant Oil Triglyceride Iodo Isocyanates
Cayli G, Kusefoglu S |
| 2441 - 2450 |
Novel Poly(amide-hydrazide)s and Copoly(amide-hydrazide)s from Bis-(4-aminobenzyl) Hydrazide and Aromatic Diacid Chlorides: Synthesis and Characterization
Medhi M, Patil AS, Halhalli MR, Choubey A, Wadgaonkar PP, Maldar NN |
| 2451 - 2464 |
Modification of Recycled Polycarbonate with Core-Shell Structured Latexes for Enhancement of Impact Resistance and Flame Retardancy
Sun SY, He YD, Wang XD, Wu DZ |
| 2465 - 2472 |
Formation and Structure of Poly(methyl methacrylate) Gels Containing Triphenyl Vinyl Silane
Naghash HJ |
| 2473 - 2479 |
Synthesis of Hyperbranched Poly(3-methyl-3-hydroxymethyloxetane) and Their Application to Separate Basic Proteins by Adsorption Coated Column
Shou CQ, Song NJ, Zhang ZL |
| 2480 - 2486 |
Effect of Fiber Surface Morphology on the Hydrophilicity Modification of Cold Plasma-Treated Polypropylene Nonwoven Fabrics
Ren WT, Cheng CZ, Wang RM, Li X |
