| 2641 - 2648 |
Syntheses of novel chitosan derivative with excellent solubility, anticoagulation, and antibacterial property by chemical modification
Liu HQ, Zhao YC, Cheng S, Huang N, Leng YX |
| 2649 - 2656 |
Calcium carbonate (CaCO3) nanoparticle filled polypropylene: Effect of particle surface treatment on mechanical, thermal, and morphological performance of composites
Kamal M, Sharma CS, Upadhyaya P, Verma V, Pandey KN, Kumar V, Agrawal DD |
| 2657 - 2668 |
Improvement of the mechanical and thermal properties of silica-filled polychloroprene vulcanizates prepared from latex system
Rattanasom N, Kueseng P, Deeprasertkul C |
| 2669 - 2681 |
Role of silane crosslinking on the properties of melt blended metallocene polyethylene-g-silane/clay nanocomposites at various clay contents
Chen WC, Lai SM, Qiu RY, Tang SX |
| 2682 - 2690 |
Characterization of polyisobutylene succinic anhydride chemistries using mass spectrometry
Rivera-Tirado E, Aaserud DJ, Wesdemiotis C |
| 2691 - 2701 |
Soft PVC foams: Study of the gelation, fusion and foaming processes. III. Mixed phthalate ester plasticizers
Zoller A, Marcilla A |
| 2702 - 2716 |
Degradation assessment of LDPE multilayer films used as a greenhouse cover: Natural and artificial aging impacts
Dehbi A, Mourad AHI, Bouaza A |
| 2717 - 2724 |
Synthesis and adsorption properties, toward some heavy metal ions, of a new polystyrene-based terpyridine polymer
Saadeh HA, Abu Shairah EA, Charef N, Mubarak MS |
| 2725 - 2735 |
Study of crater structure formation on the surface of biaxially oriented polypropylene film
Tamura S, Ohta K, Kanai T |
| 2736 - 2741 |
Preparation and characterization of polyvinyl borate/polyvinyl alcohol (PVB/PVA) blend nanofibers
Koysuren O, Karaman M, Dinc H |
| 2742 - 2752 |
Synthesis, characteristic, and properties of waterborne polyurethane based on natural rubber
Saetung A, Kaenhin L, Klinpituksa P, Rungvichaniwat A, Tulyapitak T, Munleh S, Campistron I, Pilard JF |
| 2753 - 2765 |
Effect of processing parameters on the mechanical properties of in situ compatibilized polybutylene terephthalate/acrylonitrile-butadiene-styrene blends
Ambrosio JD, Hage E |
| 2766 - 2776 |
Synthesis and evaluation of comb-type copolymers prepared via atom transfer radical polymerization as possible cold flow improvers in GTL diesel fuels
Maithufi MN, Joubert DJ, Klumperman B |
| 2777 - 2788 |
Tailoring the surface architecture of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) scaffolds
Vigneswari S, Majid MIA, Amirul AA |
| 2789 - 2797 |
Relationship between the cell structure and mechanical properties of chemically crosslinked polyethylene foams
Davari M, Aghjeh MKR, Seraji SM |
| 2798 - 2806 |
Characterization of functional states in nicotine- and cotinine-imprinted poly(4-vinylphenol) films by nanoindentation
Richter A, BelBruno JJ |
| 2807 - 2813 |
Iodination of stable aromatic diazonium salt using crosslinked poly (4-vinylpyridine)-supported iodide
Zarchi MAK, Ebrahimi N |
| 2814 - 2823 |
Optimum compatibilization for the nonflammability of thermoplasticized crosslinked polyethylene/metal hydroxides composites with a compatibilizer
Kwon YJ, Kim DK, Kim WN, Cho BG, Hong SM, Koo CM |
| 2824 - 2837 |
Structure and properties of amine-hardened epoxy/benzoxazine hybrids: Effect of epoxy resin functionality
Grishchuk S, Schmitt S, Vorster OC, Karger-Kocsis J |
| 2838 - 2845 |
Investigation on thermally-induced conformation transition of soy protein film with variable-temperature FTIR spectroscopy
Tian K, Shao ZZ, Chen X |
| 2846 - 2856 |
Effect of in situ polymerization conditions of methyl methacrylate on the structural and morphological properties of poly(methyl methacrylate)/poly(acrylonitrile-g-(ethylene-co-propylene-co-diene)-g-st yrene) PMMA/AES Blends
de Carvalho FP, Goncalves MD, Felisberti MI |
| 2857 - 2866 |
Low-temperature synthesis of nano-to-submicron size organo-zinc oxide and its effect on properties of polybutadiene rubber
Maiti M, Vaghasia A, Jasra RV |
| 2867 - 2870 |
Fluorescence upconversion properties of a chiral polybinaphthyl induced by two-photon absorption
Zeng Y, Wang CS, Huang XB, Cheng YX |
| 2871 - 2882 |
Recovery of alcohols from water using polydimethylsiloxane-silica nanocomposite membranes: Characterization and pervaporation performance
Shirazi Y, Ghadimi A, Mohammadi T |
| 2883 - 2890 |
Emulsion polymerization using NaPSS-b-PS as a cosurfactant
Chu HH, Liou LS, Chuang KS |
| 2891 - 2901 |
New fluorene-based thermally stable five- and six-membered rings polyimides with enhanced solubility
Mehdipour-Ataei S, Nazari Y |
| 2902 - 2907 |
Study on the enzymatic degradation of aliphatic polyester-PBS and its copolymers
Ding ML, Zhang M, Yang JM, Qiu JH |
| 2908 - 2918 |
Effects of neutralization on the structure and properties of an ionomer
Gao Y, Choudhury NR, Dutta NK |
| 2919 - 2929 |
Effect of nanoclay and ZnO on the physical and chemical properties of wood polymer nanocomposite
Deka BK, Maji TK |
| 2930 - 2936 |
Kinetics and molecular mechanism of chromate uptake by dithiocarbamate functionalized starch
Cheng RM, Ou SJ, Li YJ, Xiang B |
| 2937 - 2944 |
Bifunctional silane (TESPD) effects on improved mechanical properties of silica containing nitrile-butadiene rubber/poly(vinyl chloride) compound
Kim KJ |
| 2945 - 2953 |
Polymer/clay aerogel-based glass fabric laminates
Wang YX, Al-Biloushi M, Schiraldi DA |
| 2954 - 2961 |
Electrical resistance measurement methods and electrical characterization of poly(3,4-ethylenedioxythiophene)-coated conductive fibers
Bashir T, Fast L, Skrifvars M, Persson NK |
| 2962 - 2967 |
Effect of processing parameters on the surface resistivity of ethylene-vinyl acetate copolymer/multiwalled carbon nanotube nanocomposites
Yu DR, Kim GH |
| 2968 - 2977 |
Isothermal crystallization and melting behaviors of bionanocomposites from poly(lactic acid) and TiO2 nanowires
Li YH, Chen CH, Li J, Sun XZS |
| 2978 - 2986 |
An investigation of scratch testing of silicone elastomer coatings with a thickness gradient
Kohl JG, Randall NX, Schwarzer N, Ngo TT, Shockley JM, Nair RP |
| 2987 - 2998 |
Tamoxifen-loaded microspheres based on mixtures of poly(D,L-lactide-co-glycolide) and poly(D,L-lactide) polymers: Effect of polymeric composition on drug release and in vitro antitumoral activity
Fenandez A, Teijon C, Benito M, Iglesias I, Lozano R, Teijon JM, Blanco MD |
| 2999 - 3006 |
Structure and thermal behavior of poly(L-lactic acid) clay nanocomposites: Effect of preparation method as a function of the nanofiller modification level
Marras SI, Zuburtikudis I |
| 3007 - 3012 |
Imparting conductivity and chromic behavior on polyester fibers by means of poly(3-methylthiophene) nanocoating
Dashti M, Mokhtari J, Nouri M, Shirini F |
| 3013 - 3023 |
Effect of bismaleimide reactive extrusion on the crystallinity and mechanical performance of poly(lactic acid) green composites
Jimenez ABY, Sain M |
| 3024 - 3036 |
High strength thermoresponsive semi-IPN hydrogels reinforced with nanoclays
Djonlagic J, Zugic D, Petrovic Z |
| 3037 - 3050 |
The role of dry and wet isothermal annealing treatment on the structure and the mechanical properties of isotactic polypropylene fibers
Karacan I, Benli H |
| 3051 - 3063 |
Evaluation of physico-mechanical properties and in vitro biocompatibility of compression molded HDPE based biocomposites with HA/Al2O3 ceramic fillers and titanate coupling agents
Tripathi G, Dubey AK, Basu B |
| 3064 - 3073 |
Fabrication and characterization of homogeneous composites of polypropylene and multiwalled carbon nanotubes
Jeon JH, Lee SH, Lim JH, Kim KM |
| 3074 - 3081 |
Miscibility of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with high molecular weight poly(lactic acid) blends determined by thermal analysis
Modi S, Koelling K, Vodovotz Y |
| 3082 - 3091 |
Investigating the surface properties of polyurethane based anti-graffiti coatings against UV exposure
Rabea AM, Mirabedini SM, Mohseni M |
| 3092 - 3098 |
Preparation and studying properties of polybutene-1/thermoplastic starch blends
Kaseem M, Hamad K, Deri F |
| 3099 - 3107 |
Synthesis and effect of surface modified nano ZnO in natural rubber vulcanization
Thomas SP, Mathew EJ, Marykutty CV |
| 3108 - 3116 |
Thermal and mechanical behavior of natural rubber latex-silica aerogel film
On NK, Rashid AA, Nazlan MMM, Hamdan H |
| 3117 - 3123 |
Effects of liquid-type silane additives and organoclay on the morphology and thermal conductivity of rigid polyisocyanurate-polyurethane foams
Kim YH, Kang MJ, Park GP, Park SD, Kim SB, Kim WN |
| 3124 - 3131 |
Morphology and hydrogen-bond restricted crystallization of poly(butylene succinate)/cellulose diacetate blends
Zhou WH, Yuan SS, Chen YW, Bao L |
| 3132 - 3141 |
Flax-fabric-reinforced arylated soy protein composites: Brittle-matrix behavior
Kumar R, Anandjiwala RD |
| 3142 - 3146 |
Effect of adding feldspar on free volume properties of crosslinked polyester studied by positron annihilation lifetime spectroscopy
Gomaa E, Asaad JN |
| 3147 - 3153 |
X-ray diffraction study of iPP/cand iPP/TiO2 composites relating to micromechanical properties
Cagiao ME, Calleja FJB, Spieckermann F, Scholtyssek S, Mina MF, Bhuiyan MAH |
| 3154 - 3164 |
Chemical composition and structural feature of Populus gansuensis hemicellulosic polymers
Bian J, Peng F, Peng P, Xu F, Sun RC |
| 3165 - 3174 |
Electrical and mechanical properties of acrylonitrile-butadiene-styrene/multiwall carbon nanotube nanocomposites prepared by melt-blending
Singh BK, Kar P, Shrivastava NK, Banerjee S, Khatua BB |
| 3175 - 3183 |
Characterization of molecular interaionic and intraionic crosslinkable sulfonated poly(ether ether ketone-alt-benzimidazole) membrane
Wang JL, Yu HF, Lee MH, Zhang SG, Wang DH |
| 3184 - 3191 |
Study of iPP crosslinking by means of dynamic and steady rheology measurements
Khellaf S, Khoffi F, Tabet H, Lallam A, Bouhelal S, Cagiao ME, Benachour D, BaltaCalleja FJ |
| 3192 - 3199 |
Investigation of the rheological, dynamic mechanical, and tensile properties of single-walled carbon nanotubes reinforced poly(vinyl chloride)
Abu-Abdeen M |
| 3200 - 3207 |
Synthesis of polyaniline nanostructures in micellar solutions
El-Dib FI, Sayed WM, Ahmed SM, Elkodary M |
| 3208 - 3221 |
Poly(glutaraldehyde)-stabilized fish scale fibrillar collagen-some features of a new material for heavy metal sorption
Moura KO, Vieira EFS, Cestari AR |
| 3222 - 3228 |
Regioregular improvement on the oxidative polymerization of poly-3-octylthiophenes by slow addition of oxidant at low temperature
Torres BBM, Balogh DT |
| 3229 - 3235 |
Chain extension reactions of unsaturated polyesters with bis(2-oxazoline)s
Taylan E, Kusefoglu SH |
| 3236 - 3244 |
Thermal, morphological, and X-ray study of polymer-clay nanocomposites
Nigam V, Soni H, Saroop M, Verma GL, Bhattacharya AS, Setua DK |
| 3245 - 3254 |
Calcium phosphate incorporated poly(ethylene oxide)-based nanocomposite electrolytes for lithium batteries. I. Ionic conductivity and positron annihilation lifetime spectroscopy studies
Stephan AM, Kumar TP, Thomas S, Thomas PS, Bongiovanni R, Nair JR, Angulakshmi N |
| 3255 - 3263 |
Ca3(PO4)2-incorporated poly(ethylene oxide)-based nanocomposite electrolytes for lithium batteries. Part II. Interfacial properties investigated by XPS and a.c. impedance studies
Stephan AM, Kumar TP, Thomas S, Bongiovanni R, Nair JR, Angulakshmi N, Pollicino A |
| 3264 - 3275 |
Blends of LDPE/chitosan using epoxy-functionalized LDPE as compatibilizer
Prasanna K, Sailaja RRN |
| 3276 - 3285 |
Synthesis and characterization of novel core-shell magnetic nanogels based on 2-acrylamido-2-methylpropane sulfonic acid in aqueous media
Atta AM |
| 3286 - 3292 |
Accelerated ultraviolet aging study of the Vectran fiber
Liu YY, Zhang CH, Liu YT, Tan HF, Wang CG |
| 3293 - 3301 |
Synthesis and application of methyl methacrylate/butyl acrylate copolymer nanoemulsions as efficient retanning and lubricating agents for chrome-tanned leather
Nashy EHA, Essa MM, Hussain AI |
| 3302 - 3311 |
Blocked polyisocyanates containing fluorine atoms as crosslinking agents for polyurethane powder coatings
Pilch-Pitera B |
| 3312 - 3319 |
Thermal properties and adhesion strength of amorphous poly(a-olefins)/styrene-ethylene-butylene copolymer/terpene hot-melt adhesive
Kim JH, Kim HG, Lim JC, Cho KS, Min KE |
| 3320 - 3328 |
Synthesis and characterization of tanninsulfonic acid doped polyaniline-metal oxide nanocomposites
Bairi VG, Warford BA, Bourdo SE, Biris AS, Viswanathan T |
| 3329 - 3333 |
Quantitative analysis of cloisite 93A infused into linear low-density polyethylene and maleated linear low-density polyethylene in a supercritical carbon dioxide medium
Factor M, Lee S |
| 3334 - 3340 |
Effect of polyhedral oligomeric silsesquioxane on water sorption and surface property of Bis-GMA/TEGDMa composites
Song JX, Zhao JF, Ding Y, Chen GX, Sun XL, Sun D, Li QF |
| 3341 - 3347 |
Effect of plasma pretreatment on enhancing wrinkle resistant property of cotton fiber treated with BTCA and TiO2 System
Lam YL, Kan CW, Yuen CWM |
| 3348 - 3356 |
Nonisothermal crystallization behavior of Cu/LDPE nanocomposites prepared by solution blending method
Peng ZR, Cai SZ, Xia XP, Xie CS |
| 3357 - 3362 |
Thermal and mechanical properties of chitosan reinforced polyhydroxybutyrate composites
Rajan R, Sreekumar PA, Joseph K, Skrifvars M |
| 3363 - 3371 |
Development of electroless silver plating on Para-aramid fibers and growth morphology of silver deposits
Zhang HR, Zou XG, Liang JJ, Ma X, Tang ZY, Sun JL |
| 3372 - 3382 |
Investigation of fire behavior of rigid polyurethane foams containing fly ash and intumescent flame retardant by using a cone calorimeter
Usta N |
| 3383 - 3391 |
Effects of polymerization conditions on the properties of poly(furfuryl alcohol) composite membranes
He L, Li D, Dong DH, Yao JF, Huang Y, Wang HT |
| 3392 - 3398 |
Compatibilizing efficiency of copolymer precursors for immiscible polymer blends
Yu QY, Zhang CL, Gu XP, Wang JJ, Feng LF |
| 3399 - 3406 |
A convenient route to modified multiwall carbon nanotubes with liquid crystal molecules via covalent functionalization
Chen XH, Wu XL, Zou JG, Wan JP |
| 3407 - 3412 |
Effect of annealing temperature on phase composition and tensile properties in isotactic poly(1-butene)
Chvatalova L, Benicek L, Berkova K, Cermak R, Obadal M, Verney V, Commereuc S |
| 3413 - 3418 |
Evolution of aggregation structure of polyacrylonitrile fibers in the cyclization reaction
Wang B, Xiao SJ, Cao WY, Shi X, Xu LH |
| 3419 - 3425 |
Rheological characterization of concentrated cellulose solutions in 1-allyl-3-methylimidazolium chloride
Lu F, Cheng BW, Song J, Liang Y |
| 3426 - 3433 |
Microwave dielectric properties of flexible butyl rubber-strontium cerium titanate composites
Janardhanan C, Thomas D, Subodh G, Harshan S, Philip J, Sebastian MT |
| 3434 - 3439 |
Charge transport mechanism in intercalated polypyrrole aluminum-pillared montmorillonite clay nanocomposites
Shakoor A, Rizvi TZ, Hina M |
| 3440 - 3449 |
Effect of acrylic copolymer dispersants bearing epoxy groups on rheological and dielectric properties of carbon black-filled epoxy system
Son BT, Kook Y, Lee ES, Bae JY |
| 3450 - 3455 |
Controlled grafting of poly(vinyl acetate) onto starch via RAFT polymerization
Lu DR, Xiao CM, Sun F |
| 3456 - 3462 |
Convenient synthesis of sulfonamides from amines and p-toluene sulfonyl chloride mediated by crosslinked poly(4-vinylpyridine)
Zarchi MAK, Aslani M |
| 3463 - 3467 |
Influence of reactant concentration on formation of AgCl particles in PEO-PPO-PEO microemulsion and morphology and performance of AgCl-PMMA membranes
Wu LG, Wang T, Xiang W, Du CH |
| 3468 - 3477 |
Optimization of the chain transfer agent incremental addition in SBR emulsion polymerization
Delfa GM, Boschetti CE |
| 3478 - 3486 |
Characteristics of the photochemical prevulcanization in a falling film photoreactor
Schlogl S, Temel A, Schaller R, Holzner A, Kern W |
| 3487 - 3493 |
The synergistic effect of aluminum hypophosphide and nanosilica on flame-retarded ethylene-propylene-diene monomer rubber
Wang ZT, Zhang X, Bao C, Wang QY, Qin Y, Tian XY |
| 3494 - 3500 |
NIR-laser based detection of the photopolymerization state of acrylate coatings suitable for in situ measurements
Bach M, Heering W |
| 3501 - 3510 |
Radiation-assisted morphology modification of LDPE/TPS blends: A study on starch degradation-processing-morphology correlation
Dubey KA, Chaudhari CV, Raje N, Panickar L, Bhardwaj YK, Sabharwal S |
| 3511 - 3519 |
Proton exchange composite membranes from blends of brominated and sulfonated poly(2,6-dimethyl-1,4-phenylene oxide)
Xu TW, Wu D, Seo SJ, Woo JJ, Wu L, Moon SH |
| 3520 - 3524 |
Production and characterization of poly(vinyl alcohol)/poly(vinylpyrrolidone) iodine/poly(ethylene glycol) electrospun fibers with (hydroxypropyl)methyl cellulose and aloe vera as promising material for wound dressing
Uslu I, Aytimur A |
