| 2745 - 2754 |
Biodegradable poly(sebacic acid-co-ricinoleic-ester anhydride) tamoxifen citrate implants: Preparation and in vitro characterization
Hiremath JG, Devi VK, Devi K, Domb AJ |
| 2755 - 2767 |
Effects of quasi-nanogel particles on the rheological and mechanical properties of natural rubber: A new insight
Mitra S, Chattopadhyay S, Bhowmick AK |
| 2768 - 2775 |
Isothermal kinetics of (E)-4-(4-Metoxyphenyl)-4-oxo-2-butenoic acid release from a poly(acrylic acid-co-methacrylic acid) hydrogel
Adnadjevic B, Jovanovic J, Krkljus I |
| 2776 - 2785 |
The effect of crosslinker structure upon the rate of hydroperoxide formation in dried, crosslinked poly(vinylpyrrolidone)
Tallon MA, Malawer EG, Machnicki NI, Brush PJ, Wu CS, Cullen JP |
| 2786 - 2792 |
Preparation and properties of natural rubber nanocomposites with solid-state organomodified montmorillonite
Sun YH, Luo YF, Jia DM |
| 2793 - 2801 |
Low-potential electrochemical polymerization of 6-nitroindole and characterization of its polymers
Le ZG, Zeng LQ, Xu JK, Liu HT, Ma ML |
| 2802 - 2809 |
Nonisothermal crystallization kinetics of linear metallocene polyethylenes
Hussein IA |
| 2810 - 2819 |
Adsorption of trypsin onto magnetic ion-exchange beads of poly(glycidylmethacrylate-co-ethyleneglycoldimethacrylate)
Arica MY, Akyol AB, Bayramoglu G |
| 2820 - 2829 |
Temperature sensitive semi-IPN microspheres from sodium alginate and N-isopropylacrylamide for controlled release of 5-fluorouracil
Reddy KM, Babu VR, Rao KSVK, Subha MCS, Rao KC, Sairam M, Aminabhavi TM |
| 2830 - 2836 |
Enhanced bondability between morganic particles and a polysaccharide substrate by encapsulation with regenerated cellulose
Nelson K, Deng YL |
| 2837 - 2845 |
Effects of carbon nanofibers on crystalline structures and properties of ultrahigh molecular weight polyethylene blend fabricated using twin-screw extrusion
Ren X, Wang XQ, Sui G, Zhong WH, Fuqua MA, Ulven CA |
| 2846 - 2853 |
Adsorption behavior of congo red from an aqueous solution on 4-vinyl pyridine grafted poly(ethylene terephthalate) fibers
Arslan M, Yigitoglu M |
| 2854 - 2860 |
Miscibility and properties of completely biodegradable blends of poly(propylene carbonate) and poly(butylene succinate)
Pang MZ, Qiao JJ, Jiao J, Wang SJ, Xiao M, Meng YZ |
| 2861 - 2870 |
Synthesis, characterization, and antimicrobial properties of novel quaternary amine methacrylate copolymers
Punyani S, Singh H |
| 2871 - 2876 |
The influence of the impregnating chemicals on the bonding strength of impregnated wood materials
Ozcifci A, Okcu O |
| 2877 - 2882 |
Use of Flory-Huggins parameters in the characterization of polymer-filler compositions
Milczewska K, Voelkel A |
| 2883 - 2891 |
One-pot synthesis of a polysaccharide-based graft copolymer with an efficient redox pair (Fe2+/BrO3-)
Kumar R, Srivastava A, Behari K |
| 2892 - 2898 |
Perfluorosulfonic ionomer solution in N,N-dimethylformamide
Luan YH, Zhang YM, Li L, Zhang H, Zhang Q, Huang ZX, Liu YG |
| 2899 - 2908 |
Investigation on the development of sturdy bioactive hydrogel beads
Sangeetha K, Abraham TE |
| 2909 - 2916 |
Preparation of single poly(lactic acid) composites
Li RH, Yao DG |
| 2917 - 2922 |
Blends of poly(ethylene terephthalate)/polycarbonate by the use of lanthanum acetyl acetonate catalyst
Zahedi P, Arefazar A |
| 2923 - 2929 |
Ageing studies of ethylene propylene diene monomer rubber/styrene butadiene rubber blends: Effects of heat, ozone, gamma radiation, and water
Nair TM, Kumaran MG, Unnikrishnan G, Kunchand S |
| 2930 - 2943 |
Study on thermal expansion in injection-molded isotactic polypropylene and thermoplastic elastomer blends
Ono M, Nakajima K, Nishi T |
| 2944 - 2948 |
The photosensitive properties of polysiloxane acrylate resin containing tertiary amine groups
Sun F, Jiang SL, Du HG |
| 2949 - 2955 |
Inkjet printing effects of pigment inks on silk fabrics surface-modified with O-2 plasma
Fang KJ, Wang SH, Wang CX, Tian AL |
| 2956 - 2962 |
Tunable transport of glucose through ionically-crosslinked alginate gels: Effect of alginate and calcium concentration
McEntee MKE, Bhatia SK, Tao L, Roberts SC, Bhatia SR |
| 2963 - 2969 |
Sulfonated poly(ether imide) and poly(ether sulfone) blends for direct methanol fuel cells. I. Sulfonation of PEI and characterization of the products
Shu YC, Chuang FS, Tsen WC, Chow JD, Gong CL, Wen S |
| 2970 - 2976 |
Optimization of synthesis conditions of a novel carrageenan-based superabsorbent hydrogel by Taguchi method and investigation of its metal ions adsorption
Pourjavadi A, Amini-Fazl MS, Barzegar S |
| 2977 - 2985 |
Thermal degradation of a phenolic resin, vegetable fibers, and derived composites
Zarate CN, Aranguren MI, Reboredo MM |
| 2986 - 2993 |
Epoxidation of high trans-1,4-polyisoprene and its properties
Zhao YX, Huang BC, Yao W, Cong HL, Shao HF, Du AH |
| 2994 - 3004 |
Influence of natural fiber type in eco-composites
Garcia M, Garmendia I, Garcia J |
| 3005 - 3012 |
pH- and temperature-sensitive in vitro release of salicylic acid through poly(vinyl alcohol-g-acrylamide) membranes
Asman G, Sanli O, Tuncel D |
| 3013 - 3022 |
Melting behavior, nonisothermal crystallization kinetics, and morphology of PP/nylon 11/EPDM-Tg-MAH blends
Wang BB, Hu GS, Wei LX |
| 3023 - 3032 |
Alignment and optimization of nylon 6 nanofibers by electrospinning
Bazbouz MB, Stylios GK |
| 3033 - 3041 |
A novel route for the preparation of hybrid zwitterionic membranes containing both sulfortic and carboxylic acid groups
Liu JS, Xu TW, Fu YX |
| 3042 - 3048 |
Nanocomposite polymer electrolytes by in situ polymerization of methyl methacrylate: For electrochemical applications
Ahmad S, Agnihotry SA, Ahmad S |
| 3049 - 3057 |
Enrichment of poly(butyl methacrylate) and its graft copolymer of polybutadiene on the surface of polypropylene blend
Chen HJ, Shi XH, Zhu YF, Zhang Y, Xu JR |
| 3058 - 3070 |
Effects of microcompounding process parameters on the properties of ABS/polyamide-6 blends based nanocomposites
Ozkoc G, Bayram G, Quaedflieg M |
| 3071 - 3075 |
Preparation of ethylene/1-octene copolymers from ethylene stock with tandem catalytic system
Jiang T, Huang ZJ, Luo MJ, Chen HX, Ning YN |
| 3076 - 3082 |
Preparation of a sodium alginate-poly(vinyl alcohol)-chitosan bipolar membrane and its application in the electrogeneration of Ferrate(VI)
Xu CX, Chen RY, Zheng X, Chen Z |
| 3083 - 3089 |
Room temperature resistance relaxation behavior for carbon black filled conductive polymer composites
Zhou JF, Song YH, Zheng Q, Jiang X, Shui B |
| 3090 - 3098 |
Blends of polyamide 6 with low-density polyethylene compatibilized with ethylene-methacrylic acid based copolymer ionomers: Effect of neutralizing cations
Sinthavathavorn W, Nithitanakul M, Magaraphan R, Grady BP |
| 3099 - 3110 |
Mechanical characterization of toughened polyamide-6 blends with metallocene copolymers
Lopez-Quintana S, Rosales C, Gobernado-Mitre I, Merino JC, Pastor JM |
| 3111 - 3118 |
Effect of polymorphism of isotactic polybutene-1 on peel behavior of polyethylene/Polybutene-1 peel systems
Nase M, Androsch R, Langer B, Baumann HJ, Grellmann W |
| 3119 - 3126 |
Synthesis and characterization of novel polyimides derived from 2-amino-5-(4-aminophenyl)-thiazole
Zhao X, Li YF, Shao Y, Ma T, Gong CL, Huang CS |
| 3127 - 3136 |
Study on the curing reaction, dielectric and thermal performances of epoxy impregnating resin with reactive silicon compounds as new diluents
Zheng Y, Chonung K, Jin XL, Wei P, Jiang PK |
| 3137 - 3148 |
The role of interfacial interactions on the crystallinity and nanomechanical properties of clay-polymer nanocomposites: A molecular dynamics study
Sikdar D, Katti DR, Katti KS |
| 3149 - 3156 |
Release of highly hydrophilic drugs from poly(epsilon-caprolactone) matrices
Rosenberg RT, Siegel SJ, Dan N |
| 3157 - 3162 |
Kinetics study on the formation of resol with high content of hydroxymethyl group
Gao P, Zhang YF, Huang GS, Zheng J, Chen MM, Cao XL, Liu K, Zhu YW |
| 3163 - 3172 |
Isothermal crystallization of high density polyethylene and nanoscale calcium carbonate composites
Huang JW |
| 3173 - 3178 |
Electrocatalysis and determination of uracil on polythionine/multiwall carbon nanotubes modified electrode
Liu HY, Wang GF, Hu JS, Chen DL, Zhang W, Fang B |
| 3179 - 3183 |
Removal of sodium acetate in poly(vinyl alcohol) and its quantification by H-1 NMR spectroscopy
Kim Y, Lim YM, Nho YC |
| 3184 - 3189 |
Interactions of a smart cationic polyelectrolyte based on hydroxypropylellulose with an anionic surfactant
Rosol K, Szczubialka K, Jachimska B, Zapotoczny S, Nowakowska M |
| 3190 - 3199 |
Effect of thermal treatment on the tensile and in-plane shear behavior of carbon fiber-reinforced poly(phenylene sulfide) composite specimens
Pantelakis SG, Katsiropoulos CV, Lefebure P |
| 3200 - 3211 |
Thermoplastic polymers as modifiers for urea-formaldehyde wood adhesives. III. In situ thermoplastic-modified wood composites
Das S, Matuana LM, Heiden P |
| 3212 - 3220 |
Decolorization of colored poly(ethylene terephthalate) bottle flakes using hydrogen peroxide
Gupta M, Bandi SA, Mehta S, Schiraldi DA |
| 3221 - 3229 |
Lamotrigine-loaded polyacrylate nanoparticles synthesized through emulsion polymerization
Shah S, Pal A, Rajyaguru T, Murthy RSR, Devil S |
| 3230 - 3235 |
Water soluble poly(ethylene glycol) prodrug of silybin: Design, synthesis, and characterization
Zhang P, Ye H, Min T, Zhang C |
| 3236 - 3243 |
Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)
Wu HL, Ma CCM, Lin CC, Chiu YC, Chen CY, Chiang CL |
| 3244 - 3257 |
Synthesis and study of new radial organic/inorganic hybrid epoxides
Herr D, Chaplinsky S, Romanelli AL, Zadjura R |
| 3258 - 3266 |
Comparative study of the hydrolytic degradation of glycolide/L-lactide/epsilon-caprolactone terpolymers initiated by zirconium(IV) acetylacetonate or stannous octoate
Kasperczyk J, Hu YF, Jaworskam J, Dobrzynski P, Wei J, Li SM |
| 3267 - 3274 |
Structure and mechanical properties of cellulose derivatives/soy protein isolate blends
Zhou Z, Zheng H, Wei M, Huang J, Chen Y |
| 3275 - 3279 |
Ring opening polymerization of aliphatic cyclic carbonates in the presence of natural amino acids
Liu JY, Zhang C, Liu LJ |
| 3280 - 3290 |
Structure and properties for conterminously linked polymer of copoly(amic acid) with triallyl isocyanurate and bismaleimide
Huang CL, Wang CS, Leu TS |
| 3291 - 3299 |
In vitro release of salicylic acid through poly(vinyl alcohol-g-itaconic acid) membranes
Asman G, Sanli O, Tuncel D |
| 3300 - 3305 |
Radical polymerization of vinyl monomers in the presence of carbon black initiated by 2,2'-azobisisobutyronitrile and benzoyl peroxide in ionic liquid
Ueda J, Yamaguchi H, Shirai K, Yamauchi T, Tsubokawa N |
| 3306 - 3309 |
Zeta potential of Nafion molecules in isopropanol-water mixture solvent
Zhang HN, Pan JJ, He XC, Pan M |
| 3310 - 3317 |
Charge density effects on polyelectrolyte dynamic rheology
Harrington JC |
| 3318 - 3324 |
Flame retardance of montmorillonite/rubber composites
Wu YP, Huang HH, Zhao W, Zliang HF, Wang YQ, Zhang LQ |
| 3325 - 3331 |
Stearic acid surface modifying Mg(OH)(2): Mechanism and its effect on properties of ethylene vinyl acetate/Mg(OH)(2) composites
Huang HH, Tian M, Yang J, Li HX, Liang WL, Zhang LQ, Li XL |
| 3332 - 3336 |
Electrical conductivity of poly(ethylene terephthalate) modified by titanium plasma
Han ZJ, Tay BK |
| 3337 - 3342 |
A comparison of efficiency of two photoinitiators for polymerization of light-cure dental composite resins
Lizymol PP, Krishnan VK |
| 3343 - 3349 |
Polycarbonate microspheres containing tumor necrosis factor-alpha genes and magnetic powder as potential cancer therapeutics
Hu B, Yan GP, Zhuo RX, Wu Y, Fan CL |
| 3350 - 3357 |
Effect of quasi-carbonization processing parameters on the mechanical properties of quasi-carbon/phenolic composites
Cho D, Lee J |
| 3358 - 3366 |
Properties of phenol-formaldehyde resin modified with organic acid esters
Mirski R, Dziurka D, Lecka J |
| 3367 - 3372 |
Polyaniline/Pillared montmorillonite clay composite nanofibers
Binitha NN, Sugunan S |
| 3373 - 3385 |
Effects of nitrogen and carbon dioxide gases on the degradation of low-density polyethylene during extrusion and origin of the color
Dubrocq C, Milesi M, Rames-Langlade G, Monasse B |
| 3386 - 3392 |
Synthesis of dextran-metaxalone conjugates and study on their control drug release behaviors
Zhang J, Liu YF, Lan B, Fan XD |
| 3393 - 3400 |
EPDM/St-An graft copolymerization reaction behavior by phase inversion emulsion and the toughness effect of EPDM-g-SAN on SAN resin
Dai JQ, Wang LS, Cai TM, Zhang AQ, Zeng XB |
| 3401 - 3407 |
Synthesis, characterization of novel dihydrazide containing polyurethanes based on N-1,N-2-bis[(4-hydroxyphenyl) methylene]ethanedihydrazide and various diisocyanates
Raghu AV, Jeong HM |
| 3408 - 3412 |
Structure and electrochemical properties of polyamide and polyaniline
Ding SH, Chao DM, Zhang M, Zhang WJ |
| 3413 - 3418 |
Ground particle size influence on the swelling of a copolymer of AA/AMPS in water
Rosa F, Bordado J, Casquilho M |
| 3419 - 3424 |
Synthesis and characterization of bacterial cellulose/alginate blend membranes
Phisalaphong M, Suwanmajo T, Tammarate P |
| 3425 - 3433 |
Preparation of interfacially compatibilized PP-EPDM thermoplastic vulcanizate/graphite nanocomposites: Effects of graphite microstructure upon morphology, electrical conductivity, and melt rheology
Katbab AA, Hrymak AN, Kasmadjian K |
