| 2739 - 2746 |
Application of Taguchi Method to Investigate the Effects of Process Factors on the Performance of Batch Emulsion Polymerization of Vinyl Chloride
Shahbazian A, Navarchian AH, Pourmehr M |
| 2747 - 2754 |
Synthesis and Characterization of Novel Schiff Base Polyurethanes
Raghu AV, Gadaginamath GS, Jeong HM, Mathew NT, Halligudi SB, Aminabhavi TM |
| 2755 - 2764 |
Investigation of the Postcure Reaction and Surface Energy of Epoxy Resins Using Time-of-Flight Secondary Ion Mass Spectrometry and Contact-Angle Measurements
Awaja F, Gilbert M, Fox B, Kelly G, Pigram PJ |
| 2765 - 2776 |
Time-of-flight Secondary Ion Mass Spectrometry Investigation of Epoxy Resin Curing Behavior in Real Time
Awaja F, van Riessen G, Fox B, Kelly G, Pigram PJ |
| 2777 - 2784 |
The Preparation and Properties of Cellulose/Chitin Blend Filaments
He CJ, Ma BM, Sun JF |
| 2785 - 2790 |
Relations Between High-Temperature Mastication and Mooney Viscosity Relaxation in Natural Rubber
Ehabe EE, Nkeng GE, Collet A, Bonfils F |
| 2791 - 2795 |
ESR Study of Vulcanizates Under the Deformed State
Funatsu J, Takagi R, Ito M |
| 2796 - 2804 |
Studies on Structural and Functional Properties of Sericin Recovered from Silk Degumming Liquor by Membrane Technology
Gulrajani ML, Purwar R, Prasad RK, Joshi M |
| 2805 - 2812 |
Preparation and Characterization of Nylon610/Functionalized Multiwalled Carbon Nanotubes Composites
Li ZY, Xu SZ, Liu WT, He SQ, Zhu CS |
| 2813 - 2825 |
Nuclear Magnetic Resonance Spectroscopy Spectroscopic Investigation of the Aging Mechanism of Polyethylene Terephthalate Vascular Prostheses
Chaouch W, Dieval F, Le Nouen D, Defoin A, Chakfe N, Durand B |
| 2826 - 2832 |
Biodegradation of Montmorillonite Filled Oxo-Biodegradable Polyethylene
Reddy MM, Deighton M, Bhattacharya S, Parthasarathy R |
| 2833 - 2842 |
Preparation and Kinetic Analysis of PS-b-PBA Block Copolymer by 4-oxo-TEMPO Capped Polystyrene Macroinitiators
Kuo KH, Chiu WY, Cheng KC |
| 2843 - 2850 |
Structural Characteristics of UV-Irradiated Polyurethane Elastomers Extended with alpha,omega-Alkane Diols
Zia KM, Zuber M, Barikani M, Bhatti IA, Sheikh MA |
| 2851 - 2857 |
Accelerator Adsorption onto Carbon Nanotubes Surface Affects the Vulcanization Process of Styrene-Butadiene Rubber Composites
De Falco A, Marzocca AJ, Corcuera MA, Eceiza A, Mondragon I, Rubiolo GH, Goyanes S |
| 2858 - 2862 |
Simultaneous Radiation Grafting of Vinylbenzyl Chloride onto Poly(tetrafluoroethylene-co-hexafluoropropylene) Films
Shin J, Fei G, Kang SA, Ko BS, Kang PH, Nho YC |
| 2863 - 2871 |
Multiple Melting and Partial Miscibility of Ethylene-Vinyl Acetate Copolymer/Low Density Polyethylene Blends
Shi XM, Jin J, Chen SJ, Zhang J |
| 2872 - 2880 |
Microstructure of Carbon Nanofiber/Thermotropic Liquid Crystalline Polymer Composites
Lee S, Ogale AA |
| 2881 - 2886 |
Simultaneous Determination of Hydroquinone and Catechol Using Poly(p-aminobenzoic acid) Modified Glassy Carbon Electrode
Yang P, Zhu QY, Chen YH, Wang FW |
| 2887 - 2893 |
Influence of Surfactant Properties on Thermal Behavior and Sol-Gel Transitions in Surfactant-HPMC Mixtures
Joshi SC, Chen B |
| 2894 - 2901 |
Synthesis, Characterization, and Properties of Polyols from Hydrogenated Terpinene-Maleic Ester Type Epoxy Resin
Wu GM, Kong ZW, Huang H, Chen J, Chu FX |
| 2902 - 2909 |
Effect of the Addition of Wood Flours on the Properties of Rigid Polyurethane Foam
Yuan J, Shi SQ |
| 2910 - 2919 |
Statistical Evaluation of Laser Energy Density Effect on Mechanical Properties of Polyamide Parts Manufactured by Selective Laser Sintering
Beal VE, Paggi RA, Salmoria GV, Lago A |
| 2920 - 2932 |
Crystallinity Development in Cellular Poly(lactic acid) in the Presence of Supercritical Carbon Dioxide
Mihai M, Huneault MA, Favis BD |
| 2933 - 2944 |
Cytotoxicity and Hemocompatibility of a Family of Novel MeO-PEG-Poly (D,L-Lactic-co-glycolic acid)-PEG-OMe Triblock Copolymer Nanoparticles
He LL, Yang LK, Duan YR, Deng L, Sun X, Gu ZW, Zhang ZR |
| 2945 - 2954 |
Poly(vinyl pyrrolidone-co-vinyl acetate)-graft-poly(epsilon-caprolactone) as a Compatibilizer for Cellulose Acetate/Poly(epsilon-caprolactone) Blends
Higeshiro T, Teramoto Y, Nishio Y |
| 2955 - 2961 |
Electrical Characteristics of Al/Polyindole Schottky Barrier Diodes. I. Temperature Dependence
Altindal S, Sari B, Unal HI, Yavas N |
| 2962 - 2972 |
Structural Determination of Ethylene-Propylene-Diene Rubber (EPDM) Containing High Degree of Controlled Long-Chain Branching
Mitra S, Jorgensen M, Pedersen WB, Almdal K, Banerjee D |
| 2973 - 2979 |
Thermoforming Starch-graft-Polycaprolactone Biocomposites Via One-Pot Microwave Assisted Ring Opening Polymerization
Chang PR, Zhou ZY, Xu PH, Chen Y, Zhou SF, Huang J |
| 2980 - 2987 |
Effects of Mixing on Electrical Properties of Carbon Nanofiber and Polymer Composites
Lee SH, Jeon YP |
| 2988 - 2996 |
Surface Modification of Ethylene-Vinyl Alcohol Copolymer Treated with Plasma Source Ion Implantation
Hong SI, Kim KB, Lee Y, Cho SY, Ko JA, Hong SK, Park HJ |
| 2997 - 3004 |
Preparation of Poly(divinylbenzene) Microspheres with Controllable Pore Structure Using Poly(propylene)/Toluene as Coporogen
Liu QQ, Wang L, Xiao AG, Yu HJ, Ding JH, Tan QH, Huo J |
| 3005 - 3011 |
Aureole Nanofibers by Electrospinning of PAMAM-PEO Solution
Madani M, Sharifi-Sanjani N, Iraji-Rad R |
| 3012 - 3018 |
Effect of Clay Platelet Dispersion as Affected by the Manufacturing Techniques on Thermal and Mechanical Properties of PMMA-Clay Nanocomposites
Dhibar AK, Mallick S, Rath T, Khatua BB |
| 3019 - 3026 |
Surface Modification of Cellulose Fibers by Starch Grafting with Crosslinkers
Song DL, Zhao YL, Dong CX, Deng YL |
| 3027 - 3032 |
An Effective Method to Identify the Type and Content of alpha-Olefin in Polyolefine Copolymer by Fourier Transform Infrared-Differential Scanning Calorimetry
Zhang Q, Chen P, Xie XL, Cao XW |
| 3033 - 3037 |
Preparation of a Polyimide Composite Filled with Corundum as a Kind of Precision Grinding Slice
Si QS, Chen C, Xie XH, Dong YM |
| 3038 - 3048 |
Structural Development of TMMA and SSQXN-8 as Porous Chelating Resins
Ibrahim GM, Ahmad MI, El-Gammal B |
| 3049 - 3058 |
Molecular Imprinted Solid-Phase Extraction of Huperzine A from Huperzia serrata
Wang GS, Cao Q, Zhu XF, Yang XQ, Yang MH, Ding ZT |
| 3059 - 3067 |
Simulation of Dry-Spinning Process of Polyimide Fibers
Deng G, Xia QM, Xu YA, Zhang QH |
| 3068 - 3077 |
Synthesis and Properties of Hydrogels of Poly(Acrylic-Co-Acroloyl beta-Cyclodextrin)
Huang Y, Fan XD |
| 3078 - 3088 |
Crosslinking and Stabilization of Nanoparticle Filled Poly(1-trimethylsilyl-1-propyne) Nanocomposite Membranes for Gas Separations
Shao L, Samseth J, Hagg MB |
| 3089 - 3094 |
Synthesis of Intercalated Lamellar Hydroxyapatite/Gelatin Nanocomposite for Bone Substitute Application
Zuo GF, Liu C, Luo HL, He F, Liang H, Wang JH, Wan YZ |
| 3095 - 3102 |
Morphology, Rheological Behavior, and Thermal Stability of PLA/PBSA/POSS Composites
Wang RY, Wang SF, Zhang Y |
| 3103 - 3112 |
Flexural Behavior of Asymmetric Structural Foams
Barzegari MR, Rodrigue D |
| 3113 - 3124 |
Preparation of a Silica/Poly(n-butyl acrylate-co-acrylic acid) Composite Latex and Its Pressure-Sensitive Properties
Wan NY, Guo YK, Xu HP, Liu XR, Zhang LQ, Qu XW, Zhang LC |
| 3125 - 3129 |
Reactive Extrusion Process for the Grafting of Maleic Anhydride onto Linear Low-Density Polyethylene with Ultraviolet Radiation
Saade-Caballero H, Martinez-Colunga JG |
| 3130 - 3136 |
The Characterization of Polyaniline and Polypyrrole Composites by Pyrolysis Mass Spectrometry
Hacaloglu J, Tezal F, Kucukyavaz Z |
| 3137 - 3145 |
Monomers for Adhesive Polymers, 8(a) Crosslinking Polymerization of Selected N-Substituted bis(Acrylamide)s for Dental Filling Materials
Pavlinec J, Moszner N |
| 3146 - 3155 |
Electromagnetic Interference Shielding Behavior of Polyaniline/Graphite Composites Prepared by In Situ Emulsion Pathway
Saini P, Choudhary V, Sood KN, Dhawan SK |
| 3156 - 3164 |
Degradation Behavior of Nanoreinforced Epoxy Systems Under Pulse Laser
Calhoun M, Kumar A, Aglan H |
| 3165 - 3170 |
Preparation and Characterization of Epoxidate Poly(1,2-butadiene)-Toughened Diglycidyl Ether Bisphenol-A Epoxy Composites
He J, Wang JW |
| 3171 - 3180 |
Preparation and Thermal and Thermo-Oxidative Stability of Vinylidene Chloride-co-Vinyl Chloride Copolymer/Synthetic Hectorite Nanocomposites
Hsieh TH, Ho KS, Bi HT, Hung JK, Han YK, Yang SS, Chang YC |
| 3181 - 3186 |
Studies on the Influence of Molecular Weight and Isotacticity of Polypropylene on the Formation of Mesomorphic Phase
Singh G, Kaur S, Kothari AV, Naik DG, Vyas PB, Gupta VK |
| 3187 - 3195 |
Study of the Behavior of Blends of a Poly(hydroxybutyrate-valerate) Copolymer, Polypropylene, and SEBS
Marcilla A, Garcia-Quesada JC, Lopez M, Gil E |
| 3196 - 3201 |
Preparation and Properties of Poly(WPSF-co-butyl acrylate) Copolymer Emulsion with Ultrasonic Radiation II. Monomer Conversion Rate and Characterization
Ai ZQ, Zhang HR, Liu Q, Hu Y |
| 3202 - 3206 |
Modification of Fe2O3 and Its Effect on the Heat-Resistance of Silicone Rubber
Shentu BQ, Gan TF, Weng ZX |
| 3207 - 3221 |
Dynamically Vulcanized Blends of Polypropylene and Ethylene Octene Copolymer: Influence of Various Coagents on Mechanical and Morphological Characteristics
Babu RR, Singha NK, Naskar K |
| 3222 - 3227 |
Reduction of Free Radicals and Endotoxin by Conjugated Linoleic Acid Loaded in an In Situ-Synthesized Poly(N-isopropyl acrylamide) Thin Layer
Huang LH, Wu JT, Su TL, Yang MC, Kuo YL, Kung FC |
| 3228 - 3235 |
Dynamic Study of Free Volume Properties in Polyethylene/Styrene Butadiene Rubber Blends by Positron Annihilation Lifetime Method
Mostafa N, Ali EH, Mohsen M |
| 3236 - 3244 |
Comparing Elastomeric Behavior of Block and Random Ethylene-Octene Copolymers
Wang HP, Chum SP, Hiltner A, Baer E |
| 3245 - 3254 |
Thermal and Mechanical Characterization of Maleimide-Functionalized Copoly(urethane-urea)s
Gaina C, Gaina V, Ciobanu C |
| 3255 - 3263 |
Modification of Cellulose Acetate with Oligomeric Polycaprolactone by Reactive Processing: Efficiency, Compatibility, and Properties
Klebert S, Nagy L, Domjan A, Pukanszky B |
| 3264 - 3268 |
The Role of Auxiliary Monomers and Emulsifiers on Wet Scrub Resistance of Various Latex Paints at Different Pigment Volume Concentrations
Khorassani M, Afshar-Taromi F, Mohseni M, Pourmahdian S |
| 3269 - 3278 |
Durability Enhancement of Nafion (R) Fuel Cell Membranes Via In Situ Sol-Gel-Derived Titanium Dioxide Reinforcement
Patil Y, Mauritz KA |
| 3279 - 3285 |
Polyurethane-Solid Wood Composites. II. Flammability Parameters
Gao ZH, Su WQ, Wu D |
| 3286 - 3293 |
Abrasion Studies of Nylon 6/Montmorillonite Nanocomposites Using Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, and X-ray Photoelectron Spectroscopy
Zhou Q, Wang K, Loo LS |
| 3294 - 3299 |
Effect of Coprecipitated Barium Ferrite on the Cure Characteristics and Dynamic Properties of Natural Rubber-Ferrite Composites Around Percolation
Makled MHM, Washiya H, Tsuda H, Matsui T |
| 3300 - 3306 |
Study of PET/PP/TiO2 Microfibrillar-Structured Composites, Part 2: Morphology and Mechanical Properties
Li WJ, Schlarb AK, Evstatiev M |
| 3307 - 3312 |
Introduction of a New Vegetable Fiber for Textile Application
Mortazavi SM, Moghadam MK |
| 3313 - 3321 |
Pervaporation Membranes from Natural Rubber Latex Grafted with Poly(2-hydroxyethyl methacrylate) (NR-g-PHEMA) for the Separation of Water-Acetone Mixtures
Amnuaypanich S, Ratpolsan P |
| 3322 - 3329 |
Chemical Sensing Materials. I. Electrically Conductive SEBS Copolymer Systems
Pavlovsky S, Siegmann A |
| 3330 - 3335 |
Terpolymer Resin-III: Synthesis and Characterization of 8-Hydroxyquinoline-Dithiooxamide-Formaldehyde Terpolymer Resins
Katkamwar SS, Zade AB, Rahangdale SS, Gurnule WB |
| 3336 - 3344 |
Humidity-Dependent Bending Recovery and Relaxation of Human Hair
Wortmann FJ, Stapels M, Chandra L |
| 3345 - 3353 |
Glass Transition and Cold Crystallization in Carbon Dioxide Treated Poly(ethylene terephthalate)
Shieh YT, Li YS |
| 3354 - 3359 |
Kinetics and Mechanism of the Radical Copolymerization of 4-Vinyl Pyridine with Methyl Acrylate Initiated by p-Acetylbenzylidene Triphenylarsonium Ylide
Tiwari SP, Gehlot CL |
| 3360 - 3367 |
Nano/micro Ternary Composites Based on PP, Nanoclay, and CaCO3
Sorrentino L, Berardini F, Capozzoli MR, Amitrano S, Iannace S |
| 3368 - 3375 |
Processability and Mechanical Properties for Binary Blends of PP and LLDPE Produced by Metallocene Catalyst
Ono K, Ogita H, Okamoto K, Yamaguchi M |
| 3376 - 3381 |
Synthesis and Application of Water-Soluble Hyperbranched Poly(ester)s from Maleic Anhydride and Glycerol
Zhao XF, Liu LX, Dai HX, Ma CX, Tan XH, Yu RH |
| 3382 - 3387 |
Synthesis and Rheological Behavior of a Novel N-Sulfonate Ampholyte Chitosan
Yin Q, Li Y, Yin QJ, Miao X, Jiang B |
| 3388 - 3396 |
Tensile Performance and Crack Propagation of Coated Woven Fabrics Under Multiaxial Loads
Chen SH, Ding X, Fangueiro R, Yi HL, Yang XD |
| 3397 - 3404 |
Prediction of Water Retention Capacity of Hydrolysed Electrospun Polyacrylonitrile Fibers Using Statistical Model and Artificial Neural Network
Dev VRG, Venugopal JR, Senthilkumar M, Gupta D, Ramakrishna S |
| 3405 - 3416 |
Modeling the PAAc-AN-TV Surface Using Cs-134 and Eu152+154 Sorption
El-Gammal B, Ibrahim GM, Allan KF, El-Naggar IM |
| 3417 - 3425 |
Effects of Polymer-Grafted Natural Nanocrystals on the Structure and Mechanical Properties of Poly(lactic acid): A Case of Cellulose Whisker-graft-Polycaprolactone
Lin N, Chen GJ, Huang J, Dufresne A, Chang PR |
