| 2567 - 2573 |
Cyclohexene oxide mid-chain functional macromonomer of poly(epsilon-caprolactone): Synthesis, characterization, and photoinitiated cationic homo- and copolymerization
Degirmenci M, Acikses A, Genli N |
| 2574 - 2581 |
Novel magnetic nanoparticles for the hydrolysis of starch with Bacillus licheniformis alpha-amylase
Uygun DA, Ozturk N, Akgol S, Denizli A |
| 2582 - 2587 |
Surface modification of polythiophene and poly(3-methyl thiophene) films by graft copolymerization
Liu FJ, Chen YB, Wei YY, Li L, Shang SM |
| 2588 - 2594 |
Synthesis and characterization of chitosan/cloisite 30B film for controlled release of ofloxacin
Sahoo D, Nayak PL |
| 2595 - 2600 |
Phase transformation mechanisms and piezoelectric properties of poly(vinylidene fluoride)/montmorillonite composite
Zhang YY, Jiang SL, Yu Y, Xiong G, Zhang QF, Guang GZ |
| 2601 - 2608 |
Lewis acid mediated polymerization of poly(dimethylsiloxane) polymers: Investigating reaction kinetics using both NMR spectroscopy and cyclic voltammetry
Apedaile A, Liggat J, Parkinson J, Nikiforidis G, Berlouis L, Patel M |
| 2609 - 2615 |
Synthesis of an acrylate elastomer with UV stabilization and its application in polyoxymethylene
Wu GB, Yang F, Zhang SL, Ren XC |
| 2616 - 2627 |
Characterization of biodegradable polymers by inverse gas chromatography. III. Blends of amylopectin and poly(L-lactide)
Zhong BH, Al-Saigh ZY |
| 2628 - 2635 |
Synthesis of cyclohexanone formaldehyde resin-methylmethacrylate block-graft copolymers via ATRP
Canak TC, Kizilcan N, Serhatli IE |
| 2636 - 2642 |
Functionalization of lignin: Synthesis of lignophenol-graft-poly(2-ethyl-2-oxazoline) and its application to polymer blends with commodity polymers
Nemoto T, Konishi GI, Tojo Y, An YC, Funaoka M |
| 2643 - 2650 |
Silver nanoparticle deposition on hydrophilic multilayer film surface and its effect on antimicrobial activity
Sanchez-Valdes S, Ramirez-Vargas E, Ortega-Ortiz H, Ramos-deValle LF, Mendez-Nonell J, Mondragon-Chaparro M, Neira-Velazquez G, Yanez-Flores I, Meza-Rojas DE, Lozuno-Ramirez T |
| 2651 - 2661 |
Electrospun zein fibers using glyoxal as the crosslinking reagent
Selling GW, Woods KK, Biswas A |
| 2662 - 2666 |
Effect of KOH concentration in the gel polymer electrolyte for direct borohydride fuel cell
Ng PL, Jamaludin A, Alias Y, Basirun WJ, Ahmad ZA, Mohamad AA |
| 2667 - 2675 |
The physical properties of carbon nanoparticles dispersed into NBR/LLDPE nanocomposites for corrosion protection applications
Mahmoud WE |
| 2676 - 2683 |
Mechanical and thermal properties of polyphenylene sulfide/multiwalled carbon nanotube composites
Jiang ZY, Hornsby P, McCool R, Murphy A |
| 2684 - 2696 |
A combined experimental and theoretical study on vibrational and optical properties of copolymer incorporating thienylene-dioctyloxyphenyle-thienylene and bipyridine units
Ayachi S, Ghomrasni S, Alimi K |
| 2697 - 2705 |
Effect of nucleation mechanism on complex poly(L-lactide) nonisothermal crystallization process, part 2: Crystallization kinetics analysis
Martinelli A, Cali M, D'Ilario L, Francolini I, Piozzi A |
| 2706 - 2714 |
Novel poly-bridged-naphthalene with blue-light-emitting property via electropolymerization
Zhu G, Xu JK, Yue RR, Lu BY, Hou J |
| 2715 - 2725 |
Thermal, mechanical, and morphological properties of polylactic acid toughened with an impact modifier
Taib RM, Ghaleb ZA, Ishak ZAM |
| 2726 - 2732 |
Effect of the introduction of polydimethylsiloxane on the foaming behavior of block-copolymerized polypropylene
Wang MY, Ma J, Chu R, Park CB, Nanqiao Z |
| 2733 - 2742 |
Stab resisting behavior of polymeric resin reinforced p-aramid fabrics
Kim H, Nam I |
| 2743 - 2752 |
Improving the thermal and mechanical properties of poly(propylene carbonate) by incorporating functionalized graphite oxide
Bian J, Wei XW, Gong SJ, Zhang H, Guan ZP |
| 2753 - 2761 |
The water state in crosslinked poly(vinyl alcohol)-collagen hydrogel and its swelling behavior
Lin H, Dan WH, Dan NH |
| 2762 - 2767 |
Diazotization of anilines and diazo coupling with a coupling component mediated by a polymer-supported sodium nitrite and a polymeric acid
Zarchi MAK, Karimi M |
| 2768 - 2774 |
Acid-base behavior of an oligomer of 3-amino-1,2,4-triazole
Lamanna ME, de la Horra E, Sanabria J, Jacobo SE, D'Accorso NB |
| 2775 - 2780 |
Synthesis of a branched poly(phenylene ethylene) with bromomethyl groups as an organosoluble and functional parylene
Kobayashi A, Sumi K, Konishi G |
| 2781 - 2786 |
Miscibility and crystallization behavior of biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/phenolic blends
Yang F, Li ZS, Qiu ZB |
| 2787 - 2799 |
Grafting of styrene onto polyethylene in near critical media
Martini RE, Brignole EA, Barbosa SE |
| 2800 - 2804 |
Electrical and optical properties of polymer-Au nanocomposite films synthesized by magnetron cosputtering
Liu FJ, Shang SM, Duan YJ, Li L |
| 2805 - 2811 |
Curing characteristics and mechanical properties of rattan-powder-filled natural rubber composites as a function of filler loading and silane coupling agent
Ismail H, Othman N, Komethi M |
| 2812 - 2827 |
Investigation on the effects of fabrication parameters on the structure and properties of surface-modified membranes using response surface methodology
Bakeri G, Ismail AF, Rana D, Matsuura T, Shariaty M |
| 2828 - 2836 |
Influence of heat treatment on the heat distortion temperature of poly(lactic acid)/bamboo fiber/talc hybrid biocomposites
Shi QF, Mou HY, Li QY, Wang JK, Guo WH |
| 2837 - 2848 |
Plasticized and unplasticized PLA/organoclay nanocomposites: Short- and long-term thermal properties, morphology, and nonisothermal crystallization behavior
Gumus S, Ozkoc G, Aytac A |
| 2849 - 2858 |
Polyurethane foams derived from liquefied mountain pine beetle-infested barks
Zhao Y, Yan N, Feng M |
| 2859 - 2866 |
Fabrication and morphology development of isotactic polypropylene nanofibers from isotactic polypropylene/polylactide blends
Peng L, Yang OY, Ru X |
| 2867 - 2874 |
Flame-retardant polycarbonate/acrylonitrile-butadiene-styrene based on red phosphorus encapsulated by polysiloxane: Flame retardance, thermal stability, and water resistance
Jian RK, Chen L, Hu Z, Wang YZ |
| 2875 - 2882 |
Preparation of polydimethylsiloxane-coated alpha-alumina fillers with cold plasma for elastomer thermal interface materials
Liu Y, Zhang LQ, Wang WC, Yu HT, Lu YL |
| 2883 - 2893 |
Effects of the compatibility of a polyacrylic block copolymer/tackifier blend on the phase structure and tack of a pressure-sensitive adhesive
Nakamura Y, Sakai Y, Imamura K, Ito K, Fujii S, Urahama Y |
| 2894 - 2905 |
Rapid monitoring of bisphenol-A diglycidyl ether formation through byproduct estimation: A study by Fourier transform infra-red spectroscopy
Sreenadhan J, Guria C |
| 2906 - 2910 |
Novel composite nanofilm of electropolymerization and self-assembling on AA5052 surface as anticorrosion coating
Wang F, Liu JJ, Li YN, Wang YB |
| 2911 - 2922 |
Polyindene/organo-montmorillonite conducting nanocomposites. I. Synthesis, characterization, and electrokinetic properties
Guzel S, Unal HI, Erol O, Sari B |
| 2923 - 2932 |
Photo-cross-linked biodegradable thermo- and pH-responsive hydrogels for controlled drug release
Zhao CW, He P, Xiao CS, Gao XY, Zhuang XL, Chen XS |
| 2933 - 2944 |
Properties and structural characterization of oxide starch/chitosan/graphene oxide biodegradable nanocomposites
Ma J, Liu CH, Li R, Wang J |
| 2945 - 2951 |
Improvement of the interfacial adhesion between PBO fibers and PPESK matrices using plasma-induced coating
Zhang XY, Chen P, Kang XT, Chen MX, Wang Q |
| 2952 - 2958 |
Study of compostable behavior of jute nano fiber reinforced biocopolyester composites in aerobic compost environment
Maiti S, Ray D, Mitra D, Misra M |
| 2959 - 2967 |
Synthesis, characterization, and properties of new siloxane grafted copolyimides
Ghosh A, Banerjee S, Wang DY, Komber H, Voit B |
| 2968 - 2976 |
Effect of iron carboxylates on the photodegradability of polypropylene. II. Artificial weathering studies
Rajakumar K, Sarasvathy V, Chelvan AT, Chitra R, Vijayakumar CT |
| 2977 - 2984 |
Studies of fluorine-containing bismaleimide resins part I: Synthesis and characteristics of model compounds
Wang ZY, Ho JC, Shu WJ |
| 2985 - 2991 |
Influence of the base and diluent methacrylate monomers on the polymerization stress and its determinants
Froes-Salgado NRG, Boaro LC, Pick B, Pfeifer CS, Francci CE, Meier MM, Braga RR |
| 2992 - 2995 |
Direct formation of "artificial wool" nanofiber via two-spinneret electrospinning
Li CJ, Wang JN, Zhang BF |
| 2996 - 3006 |
High-viscosity polylactide prepared by in situ reaction of carboxyl-ended polyester and solid epoxy
Zhang JL, Li G, Su YZ, Qi RR, Ye DD, Yu J, Huang SW |
| 3007 - 3016 |
Sequential interpenetrating polymer networks of novolac resin and poly(2-ethyl hexyl acrylate)-thermal, mechanical, and morphological study
Goswami S, Maji SK |
| 3017 - 3022 |
Interface electric field of carbon black loaded electrode and its significant influence on charge injection into polyethylene
Xiao C, Zhang YW, An ZL, Zheng FH, Wei WJ, Xuan HY |
| 3023 - 3027 |
Rheological properties of concentrated solutions of agarose in ionic liquid
Horinaka J, Yasuda R, Takigawa T |
| 3028 - 3035 |
Frequency response analysis of nonisothermal film blowing process using transient simulations
Kim HM, Lee JS, Jung HW, Hyun JC |
| 3036 - 3045 |
Thermal stability and pyrolysis kinetics of lignin-phenol-formaldehyde resins
Perez JM, Fernandez A |
| 3046 - 3053 |
Recycled-disposable-chopstick-fiber-reinforced polypropylene green composites
Shih YF, Chen PW, Wu CS, Huang CM, Hsieh CF |
| 3054 - 3063 |
Effects of the glass bead content and the surface treatment on the mechanical properties of polypropylene composites
Liang JZ, Wu CB |
| 3064 - 3071 |
Preparation, characterization, and improvement of hollow epoxy particle-toughened vinyl ester composites for high-end applications
Foon LL, Bin Abu Bakar A |
| 3072 - 3080 |
Influence of a crosslinked system on the morphology and properties of TPVs based on PA/NBR
Fagundes ECM, Jacobi MAM |
| 3081 - 3089 |
Investigations of the tribological properties of carbon fabric reinforced phenolic polymer composites filled with several nanoparticles
Wang QH, Zhang XR, Pei XQ, Wang TM |
| 3090 - 3097 |
Time-of-flight mobilities for conducting dendrimers composed of p-phenylenevinylene dendron and triphenylamine surface group
Mizusaki M |
| 3098 - 3105 |
Morphological and physical evolutions of aramid fibers aged in a moderately alkaline environment
Derombise G, van Schoors LV, Bourmaud A, Davies P |
| 3106 - 3116 |
PE/OMMT nanocomposites prepared by in situ polymerization approach: Effects of OMMT-intercalated catalysts and silicate modifications
Huang YJ, Qin YW, Dong JY, Zhao XT, Hu XT |
| 3117 - 3127 |
Preparation of acrylic/acrylate copolymeric surfactants by emulsion polymerization used in pesticide oil-in-water emulsions
Shi YL, Zheng T, Shang Q |
| 3128 - 3136 |
A study on the curing kinetics of epoxycyclohexyl polyhedral oligomeric silsesquioxanes and hydrogenated carboxylated nitrile rubber by dynamic differential scanning calorimetry
Liu Q, Ren WT, Zhang Y, Zhang YX |
| 3137 - 3144 |
A convenient scheme for synthesizing reduction-sensitive chitosan-based amphiphilic copolymers for drug delivery
Cao MY, Jin HX, Ye WJ, Liu P, Wang LQ, Jiang HL |
| 3145 - 3153 |
Graft copolymers synthesis by dynamic covalent reorganization of polycaprolactone and poly(ethylene-co-vinyl alcohol)
Touhtouh S, Becquart F, Taha M |
| 3154 - 3163 |
Thermal, dynamic-mechanical, and dielectric properties of surfactant intercalated graphite oxide filled maleated polypropylene nanocomposites
Wang Y, Tsai HB |
| 3164 - 3172 |
New organic-inorganic hybrid membranes based on sulfonated polyimide/aminopropyltriethoxysilane doping with sulfonated mesoporous silica for direct methanol fuel cells
Geng L, He Y, Liu D, Lu CL |
| 3173 - 3181 |
Impact, thermal, and morphological properties of functionalized rubber toughened-poly(ethylene terephthalate) nanocomposites
Lim SR, Chow WS |
| 3182 - 3188 |
Preparation and characterizaton of poly(dimethyl amino ethyl methacrylate) modified poly(vinyl alcohol) membrane by UV radiation for the permeation of 5-fluorouracil
Yang JM, Ho CC |
