| 3525 - 3528 |
An improved sample preparation method for monomer conversion measurement using headspace gas chromatography in emulsion polymerization research
Zhong JF, Chai XS, Fu SY, Qin XL |
| 3529 - 3537 |
Mechanical and structural characterizations of simultaneously aligned and heat treated PAN nanofibers
Ravandi SAH, Sadrjahani M |
| 3538 - 3546 |
Rhodium(I) complex catalyst immobilized on terpolymers of N-vinylpyrrolidinone and 1-vinylimidazole
Strzelec K, Wasikowska K, Cypryk M, Pospiech P |
| 3547 - 3557 |
Comparative study on the exfoliated expanded graphite nanosheet-PES composites prepared via different compounding method
Bian J, Wei XW, Lin HL, Wang L, Guan ZP |
| 3558 - 3564 |
The effect of composition and the level of crosslinking of the poly(methylmethacrylate) phase on the properties of natural rubber-poly(methylmethacrylate) semi-2 interpenetrating polymer networks
Jayasuriya MM, Hourston DJ |
| 3565 - 3576 |
A study on using of protease for removal of animal glue adhesive in textile conservation
Ahmed HE, Kolisis FN |
| 3577 - 3582 |
The effect of solvent mixture on the properties of solvent cast polylactic acid (PLA) film
Byun Y, Whiteside S, Thomas R, Dharman M, Hughes J, Kim YT |
| 3583 - 3590 |
Characterization of nonwoven poly(ethylene terephtalate) devices functionalized with cationic polymer
Ran JH, Benistant G, Campagne C, Perichaud A, Chai F, Blanchemain N, Perwuelz A |
| 3591 - 3599 |
Thermal, hydrolytic, anticorrosive, and tribological properties of alkyd-silicone hyperbranched resins with high solid content
Murillo EA, Lopez BL, Brostow W |
| 3600 - 3605 |
Removal of chromium, copper, and nickel ions using bidentate polymeric ligand derived from 4-aminophenol and salicylaldehyde
Kandasamy P, Sasidaran M, Janaki N, Kaliyappan T |
| 3606 - 3616 |
The influence of processing parameters on the structural and mechanical properties of drawn polypropylene fibres: A factorial design approach
Yang RD, Mather RR, Fotheringham AF |
| 3617 - 3625 |
Effect of modified clay on the morphology and electric properties of PC/ABS-MWCNT composites
Besco S, Modesti M, Lorenzetti A, Donadi S, McNally T |
| 3626 - 3632 |
The electrochemical synthesis of poly(methylcarbyne) for diamond film coatings
Nur Y, Duygulu S, Pitcher MW, Toppare L |
| 3633 - 3640 |
Biodegradable poly(glycerin citrate) and its application to controlled release of theophylline
Liu SX, Jiang M, Ye S, Xu XH, Lu P, Dong J |
| 3641 - 3649 |
Influence of the filler material on the thermal stability of one-component moisture-curing polyurethane adhesives
Clauss S, Dijkstra DJ, Gabriel J, Karbach A, Matner M, Meckel W, Niemz P |
| 3650 - 3661 |
Evaluation of fade-recovery performance of hybrid friction composites based on ternary combination of ceramic-fibers, ceramic-whiskers, and aramid-fibers
Kumar M, Satapathy BK, Patnaik A, Kolluri DK, Tomar BS |
| 3662 - 3668 |
Preparation of cationic functional polymer latexes and measurement of involatile monomer conversion
Yang YA, Zhang LB, Zhu XL, Kong XZ |
| 3669 - 3677 |
Synthesis, Evaluation, and Gelation Mechanism of Organic Chromium
Liu JX, Lu XG, Sui SL |
| 3678 - 3684 |
Poly-D, L-lactide and levofloxacin-blended beads: A sustained local releasing system to treat osteomyelitis
Cao H, Chen LB, Liu YS, Xiu H, Wang H |
| 3685 - 3694 |
Synthesis and characterization of diamide-diimide-diamines based on p-amino benzoic acid and their curing and thermal behavior with epoxy blends containing phosphorus/silicon in the main chain
Durga G, Narula AK |
| 3695 - 3703 |
Effects of the incorporation of saturated fatty acids on the mechanical and barrier properties of biodegradable films
Nobrega MM, Olivato JB, Grossmann MVE, Bona E, Yamashita F |
| 3704 - 3713 |
Synthesis and properties of polycarbonate copolymers of trimethylene carbonate and 2-phenyl-5,5-bis(hydroxymethyl) trimethylene carbonate
Li ZM, Yan GP, Ai CW, Zhang Q, Li L, Liu F, Yu XH, Zhao BA |
| 3714 - 3720 |
Random copolymers based on trimethylene carbonate and e-caprolactone for implant applications: Synthesis and properties
Yang LQ, Yang D, Guan YM, Li JX, Li M |
| 3721 - 3727 |
Strontium(II) ion uptake on poly(N-vinyl imidazole)-based hydrogels
Garg G, Chauhan GS, Ahn JH |
| 3728 - 3736 |
Poly(L-histidine)-chitosan/alginate complex microcapsule as a novel drug delivery agent
Chen AZ, Chen MY, Wang SB, Huang XN, Liu YG, Chen ZX |
| 3737 - 3743 |
Preparation of molecularly imprinted polymers: Diethyl(3-methylureido)(phenyl)methylphosphonate as a dummy template for the recognition of its organophosphate pesticide analogs
Kang S, Xu Y, Zhou L, Pan CP |
| 3744 - 3750 |
Preparation of poly(L-lactide) microparticles by a supercritical antisolvent process with a mixed solvent
Chen C, Zhan SP, Zhang MM, Liu ZJ, Li ZY |
| 3751 - 3764 |
Melt strength, local velocity, and elongational viscosity profiles of low-density polyethylene filaments affected by the die design and process conditions
Sitticharoen W, Harnnarongchai W, Intawong N, Sombatsompop N |
| 3765 - 3773 |
In Situ synthesis of multiblock copolymers of poly(?-caprolactone) with different poly(ether diols) based polyurethane by reactive extrusion
Weng SG, Xia Z, Chen JD, Gong LL, Xu RJ |
| 3774 - 3781 |
Effect of postcrosslinking modification with glutaraldehyde on the properties of thermoplastic starch/poly(vinyl alcohol) blend films
Liu ZQ, Jiang M, Bai X, Dong XG, Tong J, Zhou J |
| 3782 - 3791 |
Effect of stearic acid and sodium stearate on cast cornstarch films
Wu X, Chen Y, Lv XC, Du ZL, Zhu PX |
| 3792 - 3798 |
Fabrication of hybrid ladderlike polysilsesquioxane-grafted multiwalled carbon nanotubes
Lee SH, Lim JH, Kim KM |
| 3799 - 3806 |
Synthesis of monodisperse crosslinked poly(styrene-co-divinylbenzene) microspheres by precipitation polymerization in acetic acid
Tan Z, Ma J, Chen H, Ji NY, Zong GX |
| 3807 - 3814 |
Mechanical, thermal properties, and flame retardancy of PC/ultrafine octaphenyl-POSS composites
Li LM, Li XM, Yang RJ |
| 3815 - 3820 |
Biopolymers as effective fillers in natural rubber: Composites versus biocomposites
Valodkar M, Thakore SI |
| 3821 - 3830 |
Synthesis and characterization of poly(?-methacryloxypropyltrimethoxysilane)-grafted silica hybrid nanoparticles prepared by surface-initiated atom transfer radical polymerization
Wu JR, Lai GQ, Yu HJ, Luo ZH |
| 3831 - 3839 |
Synthesis of novel silica gel immobilized-calix[4]arene amide ionophores and their anion binding abilities toward phosphate and chromate anions
Yigiter S, Bayrakci M, Ertul S, Yilmaz M |
| 3840 - 3853 |
Synthesis and characterization of a new family of cationic amino acid-based poly(ester amide)s and their biological properties
Song H, Chu CC |
| 3854 - 3860 |
Preparation and dispersibility of poly(L-lactide)-grafted silica nanoparticle
Takamura M, Yamauchi T, Tsubokawa N |
| 3861 - 3870 |
Polyacrylonitrile-based electrospun carbon paper for electrode applications
Yang Y, Simeon F, Hatton TA, Rutledge GC |
| 3871 - 3878 |
Preparation of drug-loaded microspheres of linear and star-shaped poly(D,L-lactide)s and their drug release behaviors
Baimark Y, Srisa-ard M |
| 3879 - 3891 |
Biodegradable blends based on polyvinyl pyrrolidone for insulation purposes
El-Houssiny AS, Ward AAM, Mansour SH, Abd-El-Messieh SL |
| 3892 - 3899 |
Adsorption of cationic dyes on poly(acrylic acid-co-sodium acrylate-co-acrylamide) superabsorbents
Shukla NB, Madras G |
| 3900 - 3904 |
Living free radical polymerization using cyclic trifunctional initiator
Galhardo E, Machado PMB, Lona LMF |
| 3905 - 3911 |
Synthesis and thermal properties of poly(methyl methacrylate)-poly(L-lactic acid)-poly(methyl methacrylate) tri-block copolymer
Shen J, Jiang W, Liu Y, Wei RQ, Liu XN, Zhong Y, Xu J, Li LL, Xue G |
| 3912 - 3920 |
LDPE-based blends and films stabilized with nonreleasing polymeric antioxidants for safer food packaging
Boragno L, Stagnaro P, Losio S, Sacchi MC, Menichetti S, Viglianisi C, Piergiovanni L, Limbo S |
| 3921 - 3929 |
Two photoluminescent polymers based on fluorene and 2,4,6-triphenyl pyridine: Synthesis and electroluminescence
Jiang HJ, Gao ZQ, Deng XY, Chen RF, Huang W |
| 3930 - 3939 |
Electrospun PLA/PCL fibers with tubular nanoclay: Morphological and structural analysis
Haroosh HJ, Chaudhary DS, Dong Y |
| 3940 - 3946 |
Increasing nano-particle dispersion ratio in the bubble stretching-based technique
Wang F, Wang XM, Chen F, Zhao XZ |
| 3947 - 3955 |
Compatibilization of recycled poly(ethylene terephthalate) and polypropylene blends: Effect of polypropylene molecular weight on homogeneity and compatibility
Inoya H, Leong YW, Klinklai W, Thumsorn S, Makata Y, Hamada H |
| 3956 - 3962 |
Investigation of the electroactivity, conductivity, and morphology of poly(pyrrole-co-N-alkyl pyrrole) prepared via electrochemical nanopolymerization and chemical polymerization
Massoumi B, Isfahani NS, Saraei M, Entezami A |
| 3963 - 3970 |
Preparation and characterization of high-molecular-weight poly(l-lactic acid) by chain-extending reaction with phosphites
Xie JX, Yang RJ |
| 3971 - 3979 |
Synthetic, spectroscopic, magnetic, thermal, and antimicrobial approach towards new biocidal coordination polymers
Nishat N, Hasnain S, Manisha, Asma |
| 3980 - 3987 |
Poly(L-lactic acid)/silicone dioxide nanocomposites prepared via in situ melt polycondensation of L-lactic acid in the presence of acidic silica sol: Dispersion stability of nanoparticles during dehydration/oligomerization
Ma ZQ, Wu LB, Peng B |
| 3988 - 3995 |
Comparative investigation of the ultraviolet stabilization of polycarbonate/poly(acrylonitrile-butadiene-styrene) with different ultraviolet absorbers
Rajan VV, Waber R, Wieser J |
| 3996 - 4006 |
Effect of multiwall carbon nanotube and au nanoparticle on the structure-property relationship of poly(N-isopropyl acrylamide)
Anbarasan R, Peng CA |
| 4007 - 4015 |
Influence of different types of UV absorber/UV stabilizer combination on the photodegradation of PC/ABS blend
Rajan VV, Waber R, Wieser J |
| 4016 - 4024 |
The preparation and antimicrobial effect of AgZrP/nylon 6,10 fibers used as dental hygiene materials
Saengmee-anupharb S, Thaweboon S, Amornsakchai T, Thaweboon B, Dechkunakorn S, Suddhasthira T, Srikhirin T |
| 4025 - 4032 |
Kinetics and mechanism of the charge-transfer polymerization of methyl methacrylate initiated with n-butyl amine and carbon tetrachloride catalyzed by palladium dichloride
Tiwari R, Spivak DA |
| 4033 - 4037 |
Preparation and properties of polyaniline electrospun fiber web
Kang TJ, Kim DN, Hong KH |
| 4038 - 4046 |
Multifunctionality of poly(vinyl alcohol) nanofiber webs containing titanium dioxide
Lee K, Lee S |
| 4047 - 4053 |
Dry adhesion of polythiophene nanotube arrays with drag-induced direction dependence
Huang CC, Sheng KX, Qu LT, Shi GQ |
| 4054 - 4060 |
Synthesis of functionalized polymeric adsorbent selective to cobalt
Ghag KS, Mahanwar PA |
| 4061 - 4069 |
Preparation of hollow poly(imino ether ketone) microspheres by microliquid technique
Chang GJ, Miao LB, Xu Z, Xu Y, Wei LD, Hu HJ, Luo X, Zhang L, Lin RX |
| 4070 - 4080 |
Defects classification and failure modes of electrofusion joint for connecting polyethylene pipes
Shi JF, Zheng JY, Guo WC, Qin YQ |
| 4081 - 4089 |
Influence of stretching on the resilience of LLDPE monofilaments for application in artificial turf
Kolgjini B, Schoukens G, Kiekens P |
| 4090 - 4097 |
Permanent fixation of ss-cyclodextrin on cotton surfaceuAn assessment between innovative and established approaches
Agrawal PB, Warmoeskerken MMCG |
| 4098 - 4106 |
Impact of antimony trioxide on the physico-mechanical and flammability properties of irradiated recycled rubber powder and waste polyethylene composites
Aly RO, Hassan MM, Hasanen JA, El Sayed EF |
| 4107 - 4113 |
In situ synthesis and characterization of polypropylene/polyvinyl acetate-organophilic montmorillonite nanocomposite
Liu L, Wei SL, Lai XJ |
| 4114 - 4120 |
Polymerizations of hexamethylcyclosiloxane catalyzed by metal sulfonate/acid chloride combinations
Qayouh H, Lahcini M, Six JL, Kricheldorf HR |
| 4121 - 4126 |
New route to monodispersed amphiphilic core-shell polymer nanoparticles: Polymerization of styrene from a-methylstyrene-containing macroinitiator
Jiang S, Fang XH, Yu Q, Deng JP, Yang WT |
| 4127 - 4135 |
Synthesis and antioxidant activities in polyolefin of dendritic antioxidants with hindered phenolic groups and tertiary amine
Li CQ, Wang J, Ning MM, Zhang HP |
| 4136 - 4140 |
Synthesis and evaluation of hexafluoroisopropanol-functionalized polysiloxane as a new coating material for sensors
Wei DW, Wang LS, Ma JY, Jiang HM |
| 4141 - 4148 |
Application of polyurethane/citric acid/silicone softener composite on cotton/polyester knitted fabric producing durable soft and smooth surface
Montazer M, Hashemikia S |
| 4149 - 4156 |
Evaluation of the efficiency of silicone polyether additives as antifoams in crude oil
Fraga AK, Santos RF, Mansur CRE |
| 4157 - 4164 |
Influence of polymer polarity on photochromic behavior of naphthodipyran doped in different polymeric matrixes
Zhao XC, Wang G, Zhang K |
| 4165 - 4173 |
Biodegradable supramolecular composites of poly(e-caprolactone) and low-molecular-weight organic gelators
Shibata M, Kaneko K, Hirayama K |
| 4174 - 4183 |
Preparation and performance evaluation of tetracycline hydrochloride loaded wound dressing mats based on electrospun nanofibrous poly(lactic acid)/poly(?-caprolactone) blends
Zahedi P, Karami Z, Rezaeian I, Jafari SH, Mahdaviani P, Abdolghaffari AH, Abdollahi M |
| 4184 - 4192 |
Controlled release of aspirin from pH-sensitive chitosan/poly(vinyl alcohol) hydrogel
Islam A, Yasin T, Bano I, Riaz M |
| 4193 - 4205 |
Synthesis, characterization, and photochemical properties of chromophores containing photoresponsive azobenzene and stilbene
Yang PC, Wang YH, Wu H |
| 4206 - 4212 |
Synthesis of N-benzyl-O-carboxymethylchitosan and application in the solubilization enhancement of a poorly water-soluble drug (triamcinolone)
Rosa TRD, Debrassi A, da Silva RML, Bressan C, de Freitas RA, Rodrigues CA |
| 4213 - 4221 |
Creep behavior of glass-fiber-reinforced nylon 6 products
Tohmyoh H, Ito Y, Eguchi K, Daido W, Utsunomiya J, Nakano Y |
| 4222 - 4229 |
Morphological, infrared, and ionic conductivity studies of poly(ethylene oxide)-49% poly(methyl methacrylate) grafted natural rubber-lithium perchlorate salt based solid polymer electrolytes
Ahmad A, Rahman MYA, Su'ait MS |
| 4230 - 4238 |
Multifunctional cotton fabric: Antimicrobial and durable press
Cerkez I, Kocer HB, Worley SD, Broughton RM, Huang TS |
| 4239 - 4248 |
Effects of solid lubricants on friction and wear behaviors of polyamide 6
Li DX, Li WJ, Xie Y, Li XX |
| 4249 - 4258 |
Comparison of styrene reversible addition-fragmentation chain-transfer polymerization in a miniemulsion system stabilized by ammonlysis poly(styrene-alt-maleic anhydride) and sodium dodecyl sulfate
Yu YT, Zhang QH, Zhan XL, Chen FQ |
| 4259 - 4267 |
Nanomodified fillers in chloroprene-rubber-compatibilized natural rubber/acrylonitrile-butadiene rubber blends
Thomas SP, Mathew EJ, Marykutty CV |
| 4268 - 4273 |
Biodegradable poly(butylene succinate-co-butylene adipate)/multiwalled carbon nanotube nanocomposites: Preparation, morphology, and crystallization behavior
Zhu SY, Zhao YY, Qiu ZB |
| 4274 - 4280 |
Crack initiation of natural rubber under high temperature fatigue loading
Weng GS, Huang GS, Lei HX, Qu LL, Zhang P, Nie YJ, Wu JR |
| 4281 - 4288 |
Mechanochemical synthesis and characterization of poly(2,5-dimethoxy aniline) salts
Palaniappan S, Chang YT, Liu CM, Manisankar P |
| 4289 - 4297 |
Effect of atmospheric pressure helium plasma on felting and low temperature dyeing of wool
Panda PK, Rastogi D, Jassal M, Agrawal AK |
| 4298 - 4306 |
Pt doped H3PW12O40/ZrO2 as a heterogeneous and recyclable catalyst for the synthesis of carbonated soybean oil
Wang JW, Zhao YH, Li QF, Yin N, Feng YL, Kang MQ, Wang XK |
| 4307 - 4314 |
Durable polytetrafluoroethylene composites in harsh environments: Tribology and corrosion investigation
Mu LW, Chen J, Shi YJ, Feng X, Zhu JH, Wang HY, Lu XH |
| 4315 - 4321 |
Solubility and diffusivity of cyclohexane in high density polyethylene
Rausch JL, Schulz TC, Danner RP |
| 4322 - 4330 |
Biomodification of cloisite Na plus with L-methionine amino acid and preparation of poly(vinyl alcohol)/organoclay nanocomposite films
Mallakpour S, Dinari M |
| 4331 - 4338 |
Rigid polyurethane foams based on activated soybean meal
Mu YB, Wan XB, Han ZX, Peng YX, Zhong S |
| 4339 - 4345 |
Photodependent release from poly(vinyl alcohol)/epoxypropoxy coumarin hydrogels
Lee MS, Kim JC |
| 4346 - 4351 |
Mechanical and dielectric properties of epoxy resin modified using reactive liquid rubber (HTPB)
Zhou WY, Cai JT |
| 4352 - 4361 |
Synthesis of a new compatibilisant agent PVC-g-MA and its use in the PVC/alfa composites
Hammiche D, Boukerrou A, Djidjelli H, Beztout M, Krim S |
| 4362 - 4370 |
Preparation and characterization of novel polymer hydrogel from industrial waste and copolymerization of poly(vinyl alcohol) and polyacrylamide
El-Zawawy WK, Ibrahim MM |
| 4371 - 4380 |
Whitening regenerated cellulose fibers using fluorescent agent, surfactants, and saltucolor indices measurements
Iamazaki ET, Atvars TDZ |
| 4381 - 4388 |
Polycarbonate composites flame-retarded by polyphenylsilsesquioxane of ladder structure
Jiang YY, Li XM, Yang RJ |
| 4389 - 4397 |
Synthesis and characterization of polyhedral oligomeric azido-octaphenylsilsesquioxane
Fan HB, Yang RJ |
| 4398 - 4402 |
Direct synthesis and melt-drawing property of aramids by bulk polycondensation of isophthalic acid with m-phenylenediamine and 3,4'-oxydianiline
Higashihara T, Zhang CY, Tsukuda A, Ochi T, Ueda M |
| 4403 - 4408 |
Preparation and thermal conductivity of novolac/Ni/graphite nanosheet composites
Li SS, Qi SH, Liu NL, Cao P, Zhang Y |
