| 2585 - 2585 |
Who are you? ORCID knows the answer
Tonzani S |
| 2586 - 2594 |
Effect of boron nitride as a nucleating agent on the crystallization of bacterial poly(3-hydroxybutyrate)
Puente JAS, Esposito A, Chivrac F, Dargent E |
| 2595 - 2603 |
Effect of biological degradation by termites on the flexural properties of pinewood residue/recycled high-density polyethylene composites
Lopez-Naranjo EJ, Alzate-Gaviria LM, Hernandez-Zarate G, Reyes-Trujeque J, Cupul-Manzano CV, Cruz-Estrada RH |
| 2604 - 2610 |
Effect of cross-linker on morphology, catalytic activity, and recyclability of immobilized palladium chloride
Jia YG, Jiang J, Liu LY, Chang WX, Li J |
| 2611 - 2617 |
The conditions of cationic exchange with the use of recycling polystyrene derivative, the product of sulfonation by silica sulfuric acid
Sulkowski WW, Nowak K, Sulkowska A, Mikula B, Wierzba P |
| 2618 - 2622 |
Solid-phase photocatalytic degradation of polystyrene with TiO2/Fe(St)3 as catalyst
Fa WJ, Guo LL, Wang J, Guo R, Zheng Z, Yang FL |
| 2623 - 2629 |
Preparation, characterization, antifungal activity, and mechanism of chitosan/TiO2 hybrid film against bipolaris maydis
Huang QZ, Jiao ZJ, Li M, Qiu DF, Liu KC, Shi HZ |
| 2630 - 2637 |
Thermal, electrical, and mechanical properties of polyethylenegraphene nanocomposites obtained by in situ polymerization
Fim FD, Basso NRS, Graebin AP, Azambuja DS, Galland GB |
| 2638 - 2647 |
Functionalization of wool fabric with phase-change materials microcapsules after plasma surface modification
Oliveira FR, Fernandes M, Carneiro N, Souto AP |
| 2648 - 2657 |
Effect of the type of clay organo-modifier on the morphology, thermal/mechanical/impact/barrier properties and biodegradation in soil of polycaprolactone/clay nanocomposites
Luduena LN, Vazquez A, Alvarez VA |
| 2658 - 2665 |
Damage modeling of degradable polymers under bulk erosion
Tang CY, Wang ZW, Tsui CP, Bai YF, Gao B, Wu H |
| 2666 - 2678 |
Nanocomposites of ethylene vinyl alcohol copolymer with thermally resistant cellulose nanowhiskers by melt compounding (I): Morphology and thermal properties
Martinez-Sanz M, Lopez-Rubio A, Lagaron JM |
| 2679 - 2686 |
Elongational flow mixing for manufacturing of graphite nanoplatelet/polystyrene composites
Oxfall H, Rondin J, Bouquey M, Muller R, Rigdahl M, Rychwalski RW |
| 2687 - 2693 |
Fabrication and characterization of tunable wettability surface on copper substrate by poly(ionic liquid) modification via surface-initiated nitroxide-mediated radical polymerization
Long SJ, Wan F, Yang W, Guo H, He XY, Ren J, Gao JZ |
| 2694 - 2700 |
Synthesis and nonlinear optical properties of novel y-type polyurethanes containing different concentrations of chromophore
Zhou TT, Deng GW, Liu JL, Bo SH, Wu JY, Qiu L, Liu XH, Zhen Z |
| 2701 - 2712 |
In vitro comparative biodegradation analysis of salt-leached porous polymer scaffolds
LeBlon CE, Pai R, Fodor CR, Golding AS, Coulter JP, Jedlicka SS |
| 2713 - 2719 |
Superplastic behavior of rosin/beeswax blends at room temperature
Gaillard Y, Girard M, Monge G, Burr A, Ceretti ED, Felder E |
| 2720 - 2728 |
A novel polyurethane prepolymer as toughening agent: Preparation, characterization, and its influence on mechanical and flame retardant properties of phenolic foam
Yang HY, Wang X, Yu B, Yuan HX, Song L, Hu Y, Yuen RKK, Yeoh GH |
| 2729 - 2735 |
Rapid removal of Cr(VI) ions from aqueous solutions by the macroporous poly(N, N'-dimethylamino ethyl methacrylate) hydrogels
Zhu WX, Song H, Du KF, Zeng H, Yao S |
| 2736 - 2745 |
New approach for preparation of exfoliated clay hybrid via wet kneading masterbatch process
Hung CY, Wang CC, Chen CY |
| 2746 - 2752 |
Poly(vinyl alcohol)/quaternized lignin composite absorbent: Synthesis, characterization and application for nitrate adsorption
Li Y, Lin XY, Zhuo XR, Luo XG |
| 2753 - 2758 |
Thermal and mechanical properties of sorbitol-based epoxy resin cured with quercetin and the biocomposites with wood flour
Shibata M, Yoshihara S, Yashiro M, Ohno Y |
| 2759 - 2765 |
Synthesis and properties of a novel phosphorous-containing flame-retardant hardener for epoxy resin
Liang B, Cao J, Hong XD, Wang CS |
| 2766 - 2778 |
Morphology and mechanical properties of PET/PE blends compatibilized by nanoclays: Effect of thermal stability of nanofiller organic modifier
Yousfi M, Soulestin J, Vergnes B, Lacrampe MF, Krawczak P |
| 2779 - 2788 |
Enthalpy relaxation of photopolymerized multilayered thiol-ene films
Shin J, Nazarenko S, Hoyle CE |
| 2789 - 2796 |
Preparation, characterization and the effect of carboxymethylated chitosan-cellulose derivatives hydrogels on wound healing
Fan LH, Tan C, Wang LB, Pan XR, Cao M, Wen F, Xie WG, Nie M |
| 2797 - 2806 |
Impact damage sensing of multiscale composites through epoxy matrix containing carbon nanotubes
Arronche L, La Saponara V, Yesil S, Bayram G |
| 2807 - 2816 |
Thermal, mechanical, and rheological properties of poly(epsilon-caprolactone)/halloysite nanotube nanocomposites
Lee KS, Chang YW |
| 2817 - 2822 |
Facile synthesis and micellization of biodegradable poly(decamethylene succinate)-graft-poly(ethylene glycol)
Zhu GX, Wang Y, Zhu WP, Zhu K, Xu XY, Shen ZQ |
| 2823 - 2828 |
Effects of supercritical carbon dioxide treatment conditions on the gas separation properties of polydimethylsiloxane hybrid membrane materials for air purification
Yu XZ, Zhang ZY, Rao HX, Liu FN |
| 2829 - 2839 |
Crosslinked epoxy microspheres: Preparation, surface-initiated polymerization, and use as macroporous silica porogen
Yu XP, Zhang CY, Ni Y, Zheng SX |
| 2840 - 2846 |
Biocompatibility studies of electrospun nanofibrous membrane of PLLA-PVA blend
Elakkiya T, Sheeja R, Ramadhar K, Natarajan TS |
| 2847 - 2856 |
Optimal performances of ultrasound treated kenaf fiber reinforced recycled polypropylene composites as demonstrated by response surface method
Islam MR, Beg MDH, Gupta A, Mina MF |
| 2857 - 2864 |
Dielectric relaxation studies of low thermal expansion polymer composites
Chandra A, Meyer WH |
| 2865 - 2874 |
Poly(ether imide)-modified benzoxazine blends: Influences of phase separation and hydrogen bonding interactions on the curing reaction
Zhao P, Liang XM, Chen J, Ran QC, Gu Y |
| 2875 - 2883 |
Charged membranes prepared by SPEEK of very low degree of sulfonation
Yang W, Zhang JJ, Wang YX |
| 2884 - 2895 |
In situ WAXS/SAXS structural evolution study during uniaxial stretching of poly(ethylene therephthalate) nanocomposites in solid state: Poly(ethylene therephthalate)/montmorillonite nanocomposites
Todorov LV, Martins CI, Viana JC |
| 2896 - 2901 |
Curing of phenol-formaldehyde resin mixed with wood preservatives
Miyazaki J, Furuta N, Miyauchi T |
| 2902 - 2910 |
Increasing solvent polarity and addition of salts promote beta-phase poly(vinylidene fluoride) formation
Low YKA, Tan LY, Tan LP, Boey FYC, Ng KW |
| 2911 - 2918 |
An imidazolium-functionalized isobutylene polymer having improved mechanical and barrier properties: Synthesis and characterization
Talukdar B, Bhowmick AK |
| 2919 - 2926 |
Synthesis and characterization of low-molecular-weight poly(2,6-dimethyl-1,4-phenylene oxide) in water
Gui L, Wang H, Shentu BQ, Weng ZX |
| 2927 - 2932 |
Preparation of molecularly imprinted polymers for vanillin via reversible addition-fragmentation chain transfer suspension polymerization
Zhang Y, Ding JH, Gong SW |
| 2933 - 2939 |
Investigating the membrane morphology of water/solvent/nylon 6 systems
Sobhanipour P, Karimi M |
| 2940 - 2944 |
Crystallization properties of polycaprolactone composites filled with nanometer calcium carbonate
Liang JZ, Zhou L, Tang CY, Tsui CP |
| 2945 - 2953 |
Development and characterization of composite chitosan/active carbon hydrogels for a medical application
Celine PB, Antoine V, Denis B, Laurent V, Laurent D, Catherine F |
| 2954 - 2960 |
Layered double hydroxide platelets exfoliation into a water-based polyester
Swanson CH, Stimpfling T, Troutier-Thulliez AL, Hintze-Bruening H, Leroux F |
| 2961 - 2970 |
Intra- and extra-gallery reactions in tri-functional epoxy polymer layered silicate nanocomposites
Hutchinson JM, Shiravand F, Calventus Y |
| 2971 - 2976 |
Electrocatalysis and detection of nitrite on a polyaniline-Cu nanocomposite-modified glassy carbon electrode
Zhang Y, Yin J, Wang K, Chen P, Ji L |
| 2977 - 2982 |
Synthesis and magnetorheological characteristics of ribbon-like, polypyrrole-coated carbonyl iron suspensions under oscillatory shear
Mrlik M, Sedlacik M, Pavlinek V, Bazant P, Saha P, Peer P, Filip P |
| 2983 - 2993 |
Effect of boric acid and melamine on the intumescent fire-retardant coating composition for the fire protection of structural steel substrates
Ullah S, Ahmad F, Yusoff PSMM |
| 2994 - 2999 |
Preparation of polysulfone microspheres with a hollow core/porous shell structure and their application for oil spill cleanup
Li XH, Guo YC, Zhang J, Zhang L |
| 3000 - 3009 |
State of the water in crosslinked sulfonated poly(ether ether ketone)
Al Lafi AG, Hay JN |
| 3010 - 3018 |
Facile covalent surface functionalization of multiwalled carbon nanotubes with poly(2-hydroxyethyl methacrylate) and interface related studies when incorporated into epoxy composites
Curtzwiler G, Plagge A, Vorst K, Story J |
| 3019 - 3025 |
Improvement of the thermal properties of poly(3-hydroxybutyrate) (PHB) by low molecular weight polypropylene glycol (LMWPPG) addition
Roa JPB, Patricio PSD, Orefice RL, Lago RM |
| 3026 - 3033 |
Study on the influence of electron beam irradiation on the thermal, mechanical, and rheological properties of ethylene-octene copolymer with high comonomer content
Poongavalappil S, Svoboda P, Theravalappil R, Svobodova D, Danek M, Zatloukal M |
| 3034 - 3042 |
pH and organic solvent-sensitive properties of crosslinked polymeric spheres formed by a soap-free emulsion polymerization
Shi CC, Chen X, Chen L, Chen MX, Jiang R |
| 3043 - 3049 |
Molecular dynamics simulation on interacting and mechanical properties of polylactic acid and attapulgite(100) surface
Zhou SQ, Cheng XC, Jin YL, Wu J, Zhao DS |
| 3050 - 3056 |
Fabrication of superhydrophobic fabric coating using microphase-separated dodecafluoroheptyl-containing polyacrylate and nanosilica
An QF, Xu W, Hao LF, Fu YS, Huang LX |
| 3057 - 3063 |
Synthesis and characterization of PLA nanocomposites containing nanosilica modified with different organosilanes II: Effect of the organosilanes on the properties of nanocomposites: Thermal characterization
Basilissi L, Di Silvestro G, Farina H, Ortenzi MA |
| 3064 - 3076 |
Morphological properties of impact fracture surfaces and essential work of fracture analysis of cellulose nanofibril-filled polypropylene composites
Yang HS, Gardner DJ, Nader JW |
| 3077 - 3083 |
Fe-mediated ARGET atom transfer radical polymerization of methyl methacrylate in ionic liquid-based microemulsion
Wang GX, Lu M, Liu LC, Wu H, Zhong M |
| 3084 - 3092 |
In vitro evaluation of efficacy of dihydroartemisinin-loaded methoxy poly(ethylene glycol)/poly(l-lactic acid) amphiphilic block copolymeric micelles
Lu WF, Chen SF, Wen ZY, Li Q, Chen JH |
| 3093 - 3098 |
Hydrolysis of poly(hydroxybutyrate-co-hydroxyvalerate) nanoparticles
Leimann FV, Biz MH, Musyanovych A, Sayer C, Landfester K, de Araujo PHH |
| 3099 - 3106 |
Morphology of polypropylene/silica nano- and microcomposites
Pustak A, Pucic I, Denac M, Svab I, Pohleven J, Musil V, Smit I |
| 3107 - 3112 |
Changes in the melting temperature and crystal structure of poly(vinylidene fluoride) by knotting
Matsuda Y, Ota Y, Tasaka S |
| 3113 - 3121 |
Rheological characterization of mechanical properties of chemically crosslinked microspheres
Nguyen VN, Huang N, Grossiord JL, Moine L, Agnely F, Vauthier C |
| 3122 - 3130 |
Highly porous catalytic materials with Pd and ionic liquid supported on chitosan
Jouannin C, Vincent C, Dez I, Gaumont AC, Vincent T, Guibal E |
| 3131 - 3140 |
Role of crystalline ethylene-propylene copolymer on mechanical properties of impact polypropylene copolymer
Rungswang W, Saendee P, Thitisuk B, Pathaweeisariyakul T, Cheevasrirungruang W |
| 3141 - 3148 |
Freezing/thawing effects on the exfoliation of montmorillonite in gelatin-based bionanocomposite
Mu CD, Li XY, Zhao YG, Zhang HG, Wang LJ, Li DF |
| 3149 - 3155 |
Control of rotation extrusion over shish-kebab crystal alignment in polyethylene pipe and its effect on the pipe's crack resistance
Nie M, Wang Q |
| 3156 - 3162 |
Synthesis and characterization of a novel poly(ester-urethane) containing short lactate sequences and PEG moieties
He XL, Xiao CM, Xu J |
| 3163 - 3169 |
In situ preparation of transparent polyimide nanocomposite with a small load of graphene oxide
Shi HG, Li Y, Guo TY |
| 3170 - 3176 |
Magnetite/Polypyrrole Hybrid Nanocomposites as a Promising Magnetic Resonance Imaging Contrast Material
Alves KGB, Andrade CAS, Campello SL, de Souza RE, de Melo CP |
| 3177 - 3183 |
Fabrication and surface characterization of electrosprayed poly(L-lactide) microspheres
Hu CM, Zhao JW, Cui WG |
| 3184 - 3192 |
Studies on the surface properties of mixed-matrix membrane and its antifouling properties for humic acid removal
Teow YH, Ahmad AL, Lim JK, Ooi BS |
| 3193 - 3204 |
Ethylene-methyl acrylate-glycidyl methacrylate toughened poly(lactic acid) nanocomposites
Baouz T, Rezgui F, Yilmazer U |
| 3205 - 3212 |
Structural characterization of alpha methyl styrene-butyl acrylate-grafted polyetheretherketone films
Gautam D, Ikram S, Gupta B |
| 3213 - 3219 |
Microstructural design of lead oxide-epoxy composites for radiation shielding purposes
Azman NZN, Siddiqui SA, Hart R, Low IM |
| 3220 - 3230 |
Cellulose nanocrystals extracted from okra fibers in PVA nanocomposites
Fortunati E, Puglia D, Monti M, Santulli C, Maniruzzaman M, Kenny JM |
| 3231 - 3239 |
Synthesis of polypyrrole-modified TiO2 composite adsorbent and its adsorption performance on acid Red G
Li JJ, Feng JT, Yan W |
| 3240 - 3249 |
Shape memory effect and properties memory effect of polyurethane
Farzaneh S, Fitoussi J, Lucas A, Bocquet M, Tcharkhtchi A |
| 3250 - 3255 |
Synthesis of a terpolymer containing fluorene, side chain conjugated thiophene and benzothiadiazole and its applications in photovoltaic devices
Liu HL, Qu B, Chen J, Cong ZY, An ZW, Gao C, Xiao LX, Chen ZJ, Gong QH |
| 3256 - 3262 |
Preparation and characteristics of a dummy molecularly imprinted polymer for phenol
Huang YH, Xu Y, He QH, Du BB, Cao YS |
| 3263 - 3270 |
Characterizing a novel method for blending regenerated cellulose structures with polyester filaments
Semnani D, Mazrouei-Sebdani Z, Abedinzadeh B |
| 3271 - 3279 |
Lipase-catalyzed synthesis of polymeric prodrugs of nonsteroidal anti-inflammatory drugs
Qian XQ, Wu Q, Xu FL, Lin XF |
| 3280 - 3288 |
Synthesis and properties of an insoluble chitosan resin modified by azamacrocycle copper(II) complex for protein hydrolysis
Wang XY, Wang DF, Liang P, Liang XG |
| 3289 - 3294 |
Synthesis of biomimetic hyperbranched zwitterionic polymers as targeting drug delivery carriers
Wang XH, Sun XK, Jiang GH, Wang RJ, Hu RB, Xi XG, Zhou Y, Wang S, Wang T |
| 3295 - 3307 |
Uptake of hazardous heavy metal ions by aqueous solution of poly(acrylamide) prepared through atom transfer radical polymerization process
Mishra V, Kumar R |
| 3308 - 3314 |
In situ chemically crosslinked chitosan membrane by adipic acid
Cai MT, Gong J, Cao J, Chen YW, Luo XL |
| 3315 - 3324 |
Influence of polymeric flame retardants based on phosphorus-containing polyesters on morphology and material characteristics of poly(butylene terephthalate)
Koppl T, Brehme S, Pospiech D, Fischer O, Wolff-Fabris F, Altstaedt V, Schartel B, Doring M |
| 3325 - 3329 |
Effect of PEO on the network structure of PVA hydrogels prepared by freezing/thawing method
Lian Z, Ye L |
| 3330 - 3337 |
Swelling behavior of physical and chemical DNA hydrogels
Karacan P, Cakmak H, Okay O |
| 3338 - 3345 |
Hydrolysis of birch wood by simultaneous ball milling, dilute citric acid, and fungus Penicillium simplicissimum treatment at room temperature
Yuan L, Chen ZH, Zhu YH, Liu XM, Liao HD, Chen D |
| 3346 - 3355 |
Influence of monosodium glutamate additive on the morphology and permeability characteristics of polyamide dialysis membranes
Shakaib M, Ahmed I, Yunus RM, Idris A, Hussain A |
| 3356 - 3364 |
Thermal stability of novolac cured with polyborosilazane
Guo ZB, Li H, Han WJ, Zhao T |
| 3365 - 3374 |
Synthesis of poly[3-(methacryloylamino) propyl trimethylammonium chloride-co-methacrylic acid] copolymer hydrogels for controlled indomethacin delivery
Mishra RK, Ramasamy K, Ban NN, Majeed ABA |
| 3375 - 3381 |
Co-polymerization analysis of thermosetting resins using 1H-15N-13C triple resonance NMR spectroscopy
Philbrook A, Earnshaw S, Easton CJ, Keniry MA, Latter MJ |
| 3382 - 3389 |
Influence of beta nucleation agent on the dispersion of nano-CaCO3 in isotactic polypropylene matrix
Zhang Y, Liu H, Zhang L, Zhang XW, Zhang J |
| 3390 - 3397 |
Silane-modified NaA zeolite/PAAS hybrid pervaporation membranes for the dehydration of ethanol
Wei P, Qu XY, Dong H, Zhang L, Chen HL, Gao CJ |
| 3398 - 3404 |
Synthesis and clay stabilization of a water-soluble copolymer based on acrylamide, modular beta-cyclodextrin, and AMPS
Liu XJ, Jiang WC, Gou SH, Ye ZB, Luo C |
| 3405 - 3410 |
Synthesis and properties of novel hyperbranched polyimides end-capped with metallophthalocyanines
Zhao L, Yao HY, Liu Y, Zhang YH, Jiang ZH |
| 3411 - 3416 |
Syntheses of cyclic poly(lactones) by zwitterionic ring opening polymerization catalyzed by N-heterocyclic carbene
Prasad AV, Zhu YH |
| 3417 - 3424 |
Incorporation of theophylline in a chitosan/chondroitin sulfate hydrogel matrix: In vitro release studies and mechanical properties according to pH changes
Lopes LC, Fajardo AR, Piai JF, Rubira AF, Muniz EC |
| 3425 - 3431 |
Preparation and evaluation of aconitine imprinted microspheres and its application to body fluid samples
Yu ZR, Su QL, Tang YW, Xu ZG |
| 3432 - 3437 |
Elucidation of polymer wear resistance via nanoscale healing and fracture of sintered polystyrene particles
Mohammadi H, Mohammadi N, Kheirabadi M |
| 3438 - 3445 |
Synthesis of polyvinylidene fluoride (PVDF) membranes for protein binding: Effect of casting thickness
Ahmad AL, Ideris N, Ooi BS, Low SC, Ismail A |
| 3446 - 3454 |
The effect of the diphenylamino side group on the reduction of the molecular interaction between polyurethane copolymer chains
Chung YC, Lee SB, Chun BC |
| 3455 - 3464 |
Thermal and dynamic mechanical characterization of acrylic bone cements modified with biodegradable polymers
Franco-Marques E, Mendez JA, Girones J, Pelach MA |
| 3465 - 3472 |
Polyurethane foams from melamine solutions in reactive solvents based on ethyl methyl ketone
Glowacz-Czerwonka D |
| 3473 - 3479 |
Morphology and mechanical properties of heterophasic PP-EP/EVA/organoclay nanocomposites
Espinoza-Martinez AB, Ramirez-Vargas E, Sanchez-Valdes S, de Valle LFR, Medellin-Rodriguez FJ, Hsiao BS, Rong LX, Zaragoza MV |
| 3480 - 3489 |
Synthesis and characterization of chitosan-graft-poly(acrylic acid)/nontronite hydrogel composites based on a design of experiments
Rodrigues FHA, Pereira AGB, Fajardo AR, Muniz EC |
| 3490 - 3500 |
Study on interfacial properties of unidirectional flax/vinyl ester composites: Resin manipulation on vinyl ester system
Huo SS, Chevali VS, Ulven CA |
